922 research outputs found

    Unambiguous Tracking Method Based on Combined Correlation Functions for sine/cosine-BOC CBOC and AltBOC Modulated Signals

    Get PDF
    Unambiguous tracking for Binary Offset Carrier (BOC) modulated signals is an important requirement of modern Global Navigation Satellite System (GNSS) receivers. An unambiguous tracking method based on combined correlation functions for even/odd order sine/cosine-BOC, Composite BOC(CBOC) and Alternate BOC(AltBOC) modulated signals is proposed. Firstly, a unitary mathematical formulation for all kinds of BOC modulations is introduced. Then an unambiguous tracking method is proposed based on the formulation and the idea of pseudo correlation function (PCF) method. Finally, the tracking loop based on the proposed method is designed. Simulation results indicate that the proposed method can remove side peaks while retaining the sharp main peak for all kinds of BOC modulations. The tracking performance for AltBOC is examined and the results show that the proposed method has better performance in thermal noise and long-delay multipath mitigation than the traditional unambiguous tracking methods

    Study on initial geometry fluctuations via participant plane correlations in heavy ion collisions: part II

    Get PDF
    Further investigation of the participant plane correlations within a Glauber model framework is presented, focusing on correlations between three or four participant planes of different order. A strong correlation is observed for cos(2Φ2+3Φ35Φ5)\cos(2\Phi_{2}^*+3\Phi_{3}^*-5\Phi_{5}^*) which is a reflection of the elliptic shape of the overlap region. The correlation between the corresponding experimental reaction plane angles can be easily measured. Strong correlations of similar geometric origin are also observed for cos(2Φ2+4Φ46Φ6)\cos(2\Phi_{2}^*+4\Phi_{4}^*-6\Phi_{6}^*), cos(2Φ23Φ34Φ4+5Φ5)\cos(2\Phi_2^*-3\Phi_3^*-4\Phi_4^*+5\Phi_5^*), cos(6Φ2+3Φ34Φ45Φ5)\cos(6\Phi_2^*+3\Phi_3^*-4\Phi_4^*-5\Phi_5^*), cos(Φ12Φ23Φ3+4Φ4)\cos(\Phi_1^*-2\Phi_2^*-3\Phi_3^*+4\Phi_4^*), cos(Φ1+6Φ23Φ34Φ4)\cos(\Phi_1^*+6\Phi_2^*-3\Phi_3^*-4\Phi_4^*), and cos(Φ1+2Φ2+3Φ36Φ6)\cos(\Phi_1^*+2\Phi_2^*+3\Phi_3^*-6\Phi_6^*), which are also measurable. Experimental measurements of the corresponding reaction plane correlators in heavy ion collisions at RHIC and the LHC may improve our understanding of the physics underlying the measured higher order flow harmonics.Comment: 5 pages, 5 figure

    Anomalous acoustic reflection on a sliding interface or a shear band

    Full text link
    We study the reflection of an acoustic plane wave from a steadily sliding planar interface with velocity strengthening friction or a shear band in a confined granular medium. The corresponding acoustic impedance is utterly different from that of the static interface. In particular, the system being open, the energy of an in-plane polarized wave is no longer conserved, the work of the external pulling force being partitioned between frictional dissipation and gain (of either sign) of coherent acoustic energy. Large values of the friction coefficient favor energy gain, while velocity strengthening tends to suppress it. An interface with infinite elastic contrast (one rigid medium) and V-independent (Coulomb) friction exhibits spontaneous acoustic emission, as already shown by M. Nosonovsky and G.G. Adams (Int. J. Ing. Sci., {\bf 39}, 1257 (2001)). But this pathology is cured by any finite elastic contrast, or by a moderately large V-strengthening of friction. We show that (i) positive gain should be observable for rough-on-flat multicontact interfaces (ii) a sliding shear band in a granular medium should give rise to sizeable reflection, which opens a promising possibility for the detection of shear localization.Comment: 13 pages, 10 figure

    A Pontine Region is a Neural Correlate of the Human Affective Processing Network

    Get PDF
    The in vivo neural activity of the pons during the perception of affective stimuli has not been studied despite the strong implications of its role in affective processing. To examine the activity of the pons during the viewing of affective stimuli, and to verify its functional and structural connectivity with other affective neural correlates, a multimodal magnetic resonance imaging methodology was employed in this study. We observed the in vivo activity of the pons when viewing affective stimuli. Furthermore, small-world connectivity indicated that the functional connectivity (FC) between the pons and the cortico-limbic affective regions was meaningful, with the coefficient λ being positively associated with self-reported emotional reactivity. The FC between the pons and the cortico-limbic-striatal areas was related to self-reported negative affect. Corroborating this finding was the observation that the tract passing through the pons and the left hippocampus was negatively related to self-reported positive affect and positively correlated with emotional reactivity. Our findings support the framework that the pons works conjunctively with the distributed cortico-limbic-striatal systems in shaping individuals' affective states and reactivity. Our work paves the path for future research on the contribution of the pons to the precipitation and maintenance of affective disorders.published_or_final_versio

    Modeling relaxation and jamming in granular media

    Full text link
    We introduce a stochastic microscopic model to investigate the jamming and reorganization of grains induced by an object moving through a granular medium. The model reproduces the experimentally observed periodic sawtooth fluctuations in the jamming force and predicts the period and the power spectrum in terms of the controllable physical parameters. It also predicts that the avalanche sizes, defined as the number of displaced grains during a single advance of the object, follow a power-law, P(s)sτP(s)\sim s^{-\tau}, where the exponent is independent of the physical parameters

    Estimating Wildfire Smoke Concentrations during the October 2017 California Fires through BME Space/Time Data Fusion of Observed, Modeled, and Satellite-Derived PM2.5

    Get PDF
    Exposure to wildfire smoke causes adverse health outcomes, suggesting the importance of accurately estimating smoke concentrations. Geostatistical methods can combine observed, modeled, and satellite-derived concentrations to produce accurate estimates. Here, we estimate daily average ground-level PM2.5 concentrations at a 1 km resolution during the October 2017 California wildfires, using the Constant Air Quality Model Performance (CAMP) and Bayesian Maximum Entropy (BME) methods to bias-correct and fuse three concentration datasets: permanent and temporary monitoring stations, a chemical transport model (CTM), and satellite-derived estimates. Four BME space/time kriging and data fusion methods were evaluated. All BME methods produce more accurate estimates than the standalone CTM and satellite products. Adding temporary station data increases the R2 by 36%. The data fusion of observations with the CAMP-corrected CTM and satellite-derived concentrations provides the best estimate (R2 = 0.713) in fire-impacted regions, emphasizing the importance of combining multiple datasets. We estimate that approximately 65,000 people were exposed to very unhealthy air (daily average PM2.5 ≥ 150.5 μg/m3)

    High speed synchrotron X-ray imaging studies of the ultrasound shockwave and enhanced flow during metal solidification processes

    Get PDF
    The highly dynamic behaviour of ultrasonic bubble implosion in liquid metal, the multiphase liquid metal flow containing bubbles and particles, and the interaction between ultrasonic waves and semisolid phases during solidification of metal were studied in situ using the complementary ultrafast and high speed synchrotron X-ray imaging facilities housed respectively at the Advanced Photon Source, Argonne National Laboratory, US, and Diamond Light Source, UK. Real-time ultrafast X-ray imaging of 135,780 frames per second (fps) revealed that ultrasonic bubble implosion in a liquid Bi-8 wt. %Zn alloy can occur in a single wave period (30 kHz), and the effective region affected by the shockwave at implosion was 3.5 times the original bubble diameter. Furthermore, ultrasound bubbles in liquid metal move faster than the primary particles, and the velocity of bubbles is 70 ~ 100% higher than that of the primary particles present in the same locations close to the sonotrode. Ultrasound waves can very effectively create a strong swirling flow in a semisolid melt in less than one second. The energetic flow can detach solid particles from the liquid-solid interface and redistribute them back into the bulk liquid very effectively

    Transcriptome profiling on the response of Mycosphaerella graminicola isolates to an azole fungicide using cDNA arrays

    Get PDF
    Resistance to azole antifungals is a major problem in the control of diseases caused by fungal pathogens of both humans and plants. Potential for the development of azole resistance in the wheat leaf blotch pathogen Mycosphaerella graminicola, the causal agent of the most economically significant foliar disease of wheat in north-western Europe, is now of particular concern after the recent emergence of widespread resistance to quinone outside inhibitor fungicides. Using a cDNA microarray representing around 25% of the genome, we have profiled the transcriptional response of M. graminicola to epoxiconazole, currently the most widely used azole fungicide on cereal crops. By comparing the transcription profiles of two M. graminicola isolates with contrasting sensitivities to epoxiconazole we show qualitative and quantitative differences in differentially expressed genes, including those involved in ergosterol biosynthesis, mitochondrial respiration and transport mechanisms. This represents the first study investigating the response of a plant pathogenic fungus to a fungicide using cDNA microarray technology

    The Vacuum System of HIRFL

    Get PDF
    AbstractThe vacuum system of Heavy Ion Research Facility in Lanzhou (HIRFL) is a large and complex system. HIRFL consists of two ECR ion sources, a sector focus cyclotron (SFC), a separate sector cyclotron (SSC) and a multi-purpose cooling storage ring system which has a main ring (CSRm) and an experiment ring (CSRe). Several beam lines connect these accelerators together and transfer various heavy ion beams to more than 10 experiment terminals. According to the requirements of the ion acceleration and ion lifetime, the working pressure in each accelerator is different. SFC is nearly 50 years old. After upgrade, the working pressure in SFC is improved from 10-6mbar to 10-8mbar. The pressure in SSC which was built in the 1980s reaches the same level. The cooling storage ring system with a length of 500m came into operation in 2007. The average pressures in CSRm and CSRe are 5×10-12mbar and 8×10-12mbar respectively. Different designs were adopt for vacuum system of a dozen beam lines to meet specific requirement of each experiment terminal. Along with the extensive development of the heavy ion researches and applications, new accelerators of HIRFL are under construction. The vacuum system of the new machines will be designed and constructed followed the overall schedule
    corecore