CoCuMgAl-Mixed-Oxide-Based Catalysts with Fine-Tunable Composition for the Hydrogenation of Furan Compounds

Catalysts based on CoCuMgAl mixed oxides were synthesized and studied in the hydrogenations of furfural and 5-hydroxymethylfurfural under different conditions. The changes in the structural properties of the catalysts at different stages of their preparation were studied using a set of physical methods (XRD, SEM, and TEM). It was shown that the fine regulation of the chemical compositions of the mixed oxides (i.e., changes in the Co/Cu ratio) made it possible to vary the structure, morphology, and catalytic properties of the samples. The phase composition of catalysts with Co/Cu = 1 did not change during the catalytic reaction, although the initial catalysts had a less-homogeneous morphology. 5-hydroxymethylfurfural conversion was higher for the samples with Co/Cu = 1. Furfural conversion increased when raising the Co/Cu ratio. The selectivity toward furfuryl alcohol for the catalyst with Co/Cu = 2 under mild conditions of furfural hydrogenation was more than 99%. The results obtained are important for the development of the scientific foundations of the preparation of hydrogenation catalysts with a fine-tunable composition in order to obtain the desired hydrogenation products

Thermal oxidation of a carbon condensate formed in high-frequency carbon and carbon-nickel plasma flow

Текст статьи не публикуется в открытом доступе в соответствии с политикой журнала.We have reported on the comparative characteristics of thermal oxidation of a carbon condensate prepared by high-frequency arc evaporation of graphite rods and a rod with a hollow center filled with nickel powder. In the latter case, along with different forms of nanodisperse carbon, nickel particles with nickel core-carbon shell structures are formed. It has been found that the processes of the thermal oxidation of carbon condensates with and without nickel differ significantly. Nickel particles with the carbon shell exhibit catalytic properties with respect to the oxidation of nanosized carbon structures. A noticeable difference between the temperatures of the end of the oxidation process for various carbon nanoparticles and nickel particles with the carbon shell has been established. The study is aimed at investigations of the effect of nickel nanoparticles on the dynamics of carbon condensate oxidation upon heating in the argon-oxygen flow

Catalysts Derived from Nickel-Containing Layered Double Hydroxides for Aqueous-Phase Furfural Hydrogenation

Changes in the structural and textural properties of NiAl-layered double hydroxides (LDHs) (with 2–4 molar ratios of metals) and state of nickel that occur in different steps of the synthesis of nickel catalysts were studied using XRD, thermal analysis, TPR, low-temperature nitrogen adsorption, XANES, EXAFS, and electron microscopy methods. Relations between nickel content, catalyst reduction conditions, state of nickel, and its catalytic properties were revealed. It was shown that the use of NiAl LDH as the catalyst precursor even at a high content of active metal allows for the obtaining of the dispersed particles of supported nickel that are active in the aqueous-phase hydrogenation of furfural. The catalyst activity and conversion of furfural were found to increase with elevation of the catalyst reduction temperature and the corresponding growth of the fraction of reduced nickel. However, a lower reduction temperature (500 °C) makes it possible to form smaller nickel particles with the size of 4–6 nm, and a high Ni content (Ni:Al = 4) can be used to obtain the active Ni@NiAlOx catalyst. Under mild reaction conditions (90 °C, 2.0 MPa), the furfural conversion reached 93%, and furfuryl alcohol was formed with the selectivity of 70%. Under more severe reaction conditions (150 °C, 3.0 MPa), complete conversion of furfural was achieved, and cyclopentanol and tetrahydrofurfuryl alcohol were the main hydrogenation products

Catalytic Pd-Ag nanoparticles immobilized on fiber glass by surface self-propagating thermal synthesis

Pd–Ag nanoparticles with different Pd/Ag ratio were deposited onto fiber glass by using the technique of surface self-propagating thermal synthesis (SSTS) and characterized by X-ray photoelectron spectroscopy (XPS), atomic absorption spectroscopy (ААS), and EXAFS spectroscopy. The samples reduced in hydrogen exhibited the formation of Pd–Ag alloy whose tentative structure and composition were suggested. Thermally scheduled reduction of Pd–Ag catalysts in hydrogen made the Ag atoms partially oxidized. Reported are the catalytic properties of synthesized Pd–Ag samples in selective hydrogenation of acetylene

Catalytic Pd-Ag nanoparticles immobilized on fiber glass by surface self-propagating thermal synthesis

Pd–Ag nanoparticles with different Pd/Ag ratio were deposited onto fiber glass by using the technique of surface self-propagating thermal synthesis (SSTS) and characterized by X-ray photoelectron spectroscopy (XPS), atomic absorption spectroscopy (ААS), and EXAFS spectroscopy. The samples reduced in hydrogen exhibited the formation of Pd–Ag alloy whose tentative structure and composition were suggested. Thermally scheduled reduction of Pd–Ag catalysts in hydrogen made the Ag atoms partially oxidized. Reported are the catalytic properties of synthesized Pd–Ag samples in selective hydrogenation of acetylene

Sustainable Hydrogenation of Vinyl Derivatives Using Pd/C Catalysts

The hydrogenation of unsaturated double bonds with molecular hydrogen is an efficient atom-economic approach to the production of a wide range of fine chemicals. In contrast to a number of reducing reagents typically involved in organic synthesis, hydrogenation with H2 is much more sustainable since it does not produce wastes (i.e., reducing reagent residues). However, its full sustainable potential may be achieved only in the case of easily separable catalysts and high reaction selectivity. In this work, various Pd/C catalysts were used for the liquid-phase hydrogenation of O-, S-, and N-vinyl derivatives with molecular hydrogen under mild reaction conditions (room temperature, pressure of 1 MPa). Complete conversion and high hydrogenation selectivity (>99%) were achieved by adjusting the type of Pd/C catalyst. Thus, the proposed procedure can be used as a sustainable method for vinyl group transformation by hydrogenation reactions. The discovery of the stability of active vinyl functional groups conjugated with heteroatoms (O, S, and N) under hydrogenation conditions over Pd/C catalysts opens the way for many useful transformations