Critical Casimir forces between planar and crenellated surfaces

We study critical Casimir forces between planar walls and geometrically structured substrates within mean-field theory. As substrate structures, crenellated surfaces consisting of periodic arrays of rectangular crenels and merlons are considered. Within the widely used proximity force approximation, both the top surfaces of the merlons and the bottom surfaces of the crenels contribute to the critical Casimir force. However, for such systems the full, numerically determined critical Casimir forces deviate significantly fromthe pairwise addition formalismunderlying the proximity force approximation. A first-order correction to the proximity force approximation is presented in terms of a step contribution arising from the critical Casimir interaction between a planar substrate and the right-angled steps of the merlons consisting of their upper and lower edges as well as their sidewalls.Comment: 9 pages, 6 figure

Alignment of cylindrical colloids near chemically patterned substrates induced by critical Casimir torques

Recent experiments have demonstrated a fluctuation-induced lateral trapping of spherical colloidal particles immersed in a binary liquid mixture near its critical demixing point and exposed to chemically patterned substrates. Inspired by these experiments, we study this kind of effective interaction, known as the critical Casimir effect, for elongated colloids of cylindrical shape. This adds orientational degrees of freedom. When the colloidal particles are close to a chemically structured substrate, a critical Casimir torque acting on the colloids emerges. We calculate this torque on the basis of the Derjaguin approximation. The range of validity of the latter is assessed via mean-field theory. This assessment shows that the Derjaguin approximation is reliable in experimentally relevant regimes, so that we extend it to Janus particles endowed with opposing adsorption preferences. Our analysis indicates that critical Casimir interactions are capable of achieving well-defined, reversible alignments both of chemically homogeneous and of Janus cylinders.Comment: 24 pages, 12 figures; v2: 22 pages, 12 figure

Critical Casimir effect for colloids close to chemically patterned substrates

Colloids immersed in a critical or near-critical binary liquid mixture and close to a chemically patterned substrate are subject to normal and lateral critical Casimir forces of dominating strength. For a single colloid we calculate these attractive or repulsive forces and the corresponding critical Casimir potentials within mean-field theory. Within this approach we also discuss the quality of the Derjaguin approximation and apply it to Monte Carlo simulation data available for the system under study. We find that the range of validity of the Derjaguin approximation is rather large and that it fails only for surface structures which are very small compared to the geometric mean of the size of the colloid and its distance from the substrate. For certain chemical structures of the substrate the critical Casimir force acting on the colloid can change sign as a function of the distance between the particle and the substrate; this provides a mechanism for stable levitation at a certain distance which can be strongly tuned by temperature, i.e., with a sensitivity of more than 200nm/K.Comment: 27 pages, 14 figure

Critical adsorption and critical Casimir forces for geometrically structured confinements

We study the behavior of fluids, confined by geometrically structured substrates, upon approaching a critical point at T = Tc in their bulk phase diagram. As generic substrate structures periodic arrays of wedges and ridges are considered. Based on general renormalization group arguments we calculate, within mean field approximation, the universal scaling functions for order parameter profiles of a fluid close to a single structured substrate and discuss the decay of its spatial variation into the bulk. We compare the excess adsorption at corrugated substrates with the one at planar walls. The confinement of a critical fluid by two walls generates effective critical Casimir forces between them. We calculate corresponding universal scaling functions for the normal critical Casimir force between a flat and a geometrically structured substrate as well as the lateral critical Casimir force between two identically patterned substrates.Comment: 25 pages, 21 figure

Normal and lateral critical Casimir forces between colloids and patterned substrates

We study the normal and lateral effective critical Casimir forces acting on a spherical colloid immersed in a critical binary solvent and close to a chemically structured substrate with alternating adsorption preference. We calculate the universal scaling function for the corresponding potential and compare our results with recent experimental data [Soyka F., Zvyagolskaya O., Hertlein C., Helden L., and Bechinger C., Phys. Rev. Lett., 101, 208301 (2008)]. The experimental potentials are properly captured by our predictions only by accounting for geometrical details of the substrate pattern for which, according to our theory, critical Casimir forces turn out to be a sensitive probe.Comment: 6 pages, 3 figure

Tunability of Critical Casimir Interactions by Boundary Conditions

We experimentally demonstrate that critical Casimir forces in colloidal systems can be continuously tuned by the choice of boundary conditions. The interaction potential of a colloidal particle in a mixture of water and 2,6-lutidine has been measured above a substrate with a gradient in its preferential adsorption properties for the mixture's components. We find that the interaction potentials at constant temperature but different positions relative to the gradient continuously change from attraction to repulsion. This demonstrates that critical Casimir forces respond not only to minute temperature changes but also to small changes in the surface properties.Comment: 4 figures; http://www.iop.org/EJ/article/0295-5075/88/2/26001/epl_88_2_26001.htm

Nonadditivity of critical Casimir forces

In soft condensed matter physics, effective interactions often emerge due to the spatial confinement of fluctuating fields. For instance, microscopic particles dissolved in a binary liquid mixture are subject to critical Casimir forces whenever their surfaces confine the thermal fluctuations of the order parameter of the solvent close to its critical demixing point. These forces are theoretically predicted to be nonadditive on the scale set by the bulk correlation length of the fluctuations. Here we provide direct experimental evidence of this fact by reporting the measurement of the associated many-body forces. We consider three colloidal particles in optical traps and observe that the critical Casimir force exerted on one of them by the other two differs from the sum of the forces they exert separately. This three-body effect depends sensitively on the distance from the critical point and on the chemical functionalisation of the colloid surfaces

Critical Casimir forces and adsorption profiles in the presence of a chemically structured substrate

Motivated by recent experiments with confined binary liquid mixtures near demixing, we study the universal critical properties of a system, which belongs to the Ising universality class, in the film geometry. We employ periodic boundary conditions in the two lateral directions and fixed boundary conditions on the two confining surfaces, such that one of them has a spatially homogeneous adsorption preference while the other one exhibits a laterally alternating adsorption preference, resembling locally a single chemical step. By means of Monte Carlo simulations of an improved Hamiltonian, so that the leading scaling corrections are suppressed, numerical integration, and finite-size scaling analysis we determine the critical Casimir force and its universal scaling function for various values of the aspect ratio of the film. In the limit of a vanishing aspect ratio the critical Casimir force of this system reduces to the mean value of the critical Casimir force for laterally homogeneous ++ and +- boundary conditions, corresponding to the surface spins on the two surfaces being fixed to equal and opposite values, respectively. We show that the universal scaling function of the critical Casimir force for small but finite aspect ratios displays a linear dependence on the aspect ratio which is solely due to the presence of the lateral inhomogeneity. We also analyze the order-parameter profiles at criticality and their universal scaling function which allows us to probe theoretical predictions and to compare with experimental data.Comment: revised version, section 5.2 expanded; 53 pages, 12 figures, iopart clas

On the socio-technical potential for onshore wind in Europe : a response to Enevoldsen et al. (2019), Energy Policy, 132, 1092-1100

Acknoweldgements: S.W. and J.S. received funding from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme (reFUEL, grant agreement No. 758149). J.L. and T.T. received funding from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme (grant agreement no. 715132).Peer reviewedPostprin

Tuning the 3D microenvironment of reprogrammed tubule cells enhances biomimetic modeling of polycystic kidney disease

Renal tubular cells frequently lose differentiation markers and physiological properties when propagated in conventional cell culture conditions. Embedding cells in 3D microenvironments or controlling their 3D assembly by bioprinting can enhance their physiological properties, which is beneficial for modeling diseases in vitro. A potential cellular source for modeling renal tubular physiology and kidney diseases in vitro are directly reprogrammed induced renal tubular epithelial cells (iRECs). iRECs were cultured in various biomaterials and as bioprinted tubular structures. They showed high compatibility with the embedding substrates and dispensing methods. The morphology of multicellular aggregates was substantially influenced by the 3D microenvironment. Transcriptomic analyses revealed signatures of differentially expressed genes specific to each of the selected biomaterials. Using a new cellular model for autosomal-dominant polycystic kidney disease, Pkd1$^{-/-}$ iRECs showed disrupted morphology in bioprinted tubules and a marked upregulation of the Aldehyde dehydrogenase 1a1 (Aldh1a1). In conclusion, 3D microenvironments strongly influence the morphology and expression profiles of iRECs, help to unmask disease phenotypes, and can be adapted to experimental demands. Combining a direct reprogramming approach with appropriate biomaterials will facilitate construction of biomimetic kidney tubules and disease models at the microscale