Guided assembly of nanoparticles on electrostatically charged nanocrystalline diamond thin films

We apply atomic force microscope for local electrostatic charging of oxygen-terminated nanocrystalline diamond (NCD) thin films deposited on silicon, to induce electrostatically driven self-assembly of colloidal alumina nanoparticles into micro-patterns. Considering possible capacitive, sp2 phase and spatial uniformity factors to charging, we employ films with sub-100 nm thickness and about 60% relative sp2 phase content, probe the spatial material uniformity by Raman and electron microscopy, and repeat experiments at various positions. We demonstrate that electrostatic potential contrast on the NCD films varies between 0.1 and 1.2 V and that the contrast of more than ±1 V (as detected by Kelvin force microscopy) is able to induce self-assembly of the nanoparticles via coulombic and polarization forces. This opens prospects for applications of diamond and its unique set of properties in self-assembly of nano-devices and nano-systems

Impact of AFM-induced nano-pits in a-Si:H films on silicon crystal growth

Conductive tips in atomic force microscopy (AFM) can be used to localize field-enhanced metal-induced solid-phase crystallization (FE-MISPC) of amorphous silicon (a-Si:H) at room temperature down to nanoscale dimensions. In this article, the authors show that such local modifications can be used to selectively induce further localized growth of silicon nanocrystals. First, a-Si:H films by plasma-enhanced chemical vapor deposition on nickel/glass substrates are prepared. After the FE-MISPC process, yielding both conductive and non-conductive nano-pits in the films, the second silicon layer at the boundary condition of amorphous and microcrystalline growth is deposited. Comparing AFM morphology and current-sensing AFM data on the first and second layers, it is observed that the second deposition changes the morphology and increases the local conductivity of FE-MISPC-induced pits by up to an order of magnitude irrespective of their prior conductivity. This is attributed to the silicon nanocrystals (<100 nm) that tend to nucleate and grow inside the pits. This is also supported by micro-Raman spectroscopy

Transitionless quantum drivings for the harmonic oscillator

Two methods to change a quantum harmonic oscillator frequency without transitions in a finite time are described and compared. The first method, a transitionless-tracking algorithm, makes use of a generalized harmonic oscillator and a non-local potential. The second method, based on engineering an invariant of motion, only modifies the harmonic frequency in time, keeping the potential local at all times.Comment: 11 pages, 1 figure. Submitted for publicatio

Synthesis, structure, and opto-electronic properties of organic-based nanoscale heterojunctions

Enormous research effort has been put into optimizing organic-based opto-electronic systems for efficient generation of free charge carriers. This optimization is mainly due to typically high dissociation energy (0.1-1 eV) and short diffusion length (10 nm) of excitons in organic materials. Inherently, interplay of microscopic structural, chemical, and opto-electronic properties plays crucial role. We show that employing and combining advanced scanning probe techniques can provide us significant insight into the correlation of these properties. By adjusting parameters of contact- and tapping-mode atomic force microscopy (AFM), we perform morphologic and mechanical characterizations (nanoshaving) of organic layers, measure their electrical conductivity by current-sensing AFM, and deduce work functions and surface photovoltage (SPV) effects by Kelvin force microscopy using high spatial resolution. These data are further correlated with local material composition detected using micro-Raman spectroscopy and with other electronic transport data. We demonstrate benefits of this multi-dimensional characterizations on (i) bulk heterojunction of fully organic composite films, indicating differences in blend quality and component segregation leading to local shunts of photovoltaic cell, and (ii) thin-film heterojunction of polypyrrole (PPy) electropolymerized on hydrogen-terminated diamond, indicating covalent bonding and transfer of charge carriers from PPy to diamond

Feasibility of an Outpatient Training Program after COVID-19

Long-term physical consequences of coronavirus disease 2019 (COVID-19) are currently being reported. As a result, the focus is turning towards interventions that support recovery after hospitalization. To date, the feasibility of an outpatient program for people recovering from COVID-19 has not been investigated. This study presents data for a physiotherapy-led, comprehensive outpatient pulmonary rehabilitation (PR) program. Patients were recruited after hospital discharge. Training consisted of twice weekly, interval-based aerobic cycle endurance (ACE) training, followed by resistance training (RT); 60–90 min per session at intensities of 50% peak work rate; education and physical activity coaching were also provided. Feasibility outcomes included: recruitment and dropout rates, number of training sessions undertaken, and tolerability for dose and training mode. Of the 65 patients discharged home during the study period, 12 were successfully enrolled onto the program. Three dropouts (25%) were reported after 11–19 sessions. Tolerability of interval-based training was 83% and 100% for exercise duration of ACE and RT, respectively; 92% for training intensity, 83% progressive increase of intensity, and 83% mode in ACE. We tentatively suggest from these preliminary findings that the PR protocol used may be both feasible, and confer benefits to a small subgroup of patients recovering from COVID-19

Irreversible Performance of a Quantum Harmonic Heat Engine

The unavoidable irreversible losses of power in a heat engine are found to be of quantum origin. Following thermodynamic tradition a model quantum heat engine operating by the Otto cycle is analyzed. The working medium of the model is composed of an ensemble of harmonic oscillators. A link is established between the quantum observables and thermodynamical variables based on the concept of canonical invariance. These quantum variables are sufficient to determine the state of the system and with it all thermodynamical variables. Conditions for optimal work, power and entropy production show that maximum power is a compromise between the quasistatic limit of adiabatic following on the compression and expansion branches and a sudden limit of very short time allocation to these branches. At high temperatures and quasistatic operating conditions the efficiency at maximum power coincides with the endoreversible result. The optimal compression ratio varies from the square root of the temperature ratio in the quasistatic limit where their reversibility is dominated by heat conductance to the temperature ratio to the power of 1/4 in the sudden limit when the irreversibility is dominated by friction. When the engine deviates from adiabatic conditions the performance is subject to friction. The origin of this friction can be traced to the noncommutability of the kinetic and potential energy of the working medium.Comment: 25 pages, 7 figures. Revision added explicit heat-transfer expression and extended the discussion on the quantum origin of frictio

The smallest refrigerators can reach maximal efficiency

We investigate whether size imposes a fundamental constraint on the efficiency of small thermal machines. We analyse in detail a model of a small self-contained refrigerator consisting of three qubits. We show analytically that this system can reach the Carnot efficiency, thus demonstrating that there exists no complementarity between size and efficiency.Comment: 9 pages, 1 figure. v2: published versio

Prognosis in patients with myocardial infarction with ST-elevation depending on the timing of interventional revascularization

Проверена е прогнозата (болничния и следболничния леталитет до края на 6-ия месец) при 300 болни (212 мъже и 88 жени) с първи миокарден инфаркт със ST- елевация (STEMI) на средна възраст 62.9 год. в зависимост от срока на извършената първична коронарна интервенция (PCI) след началото на симптомите. В зависимост от срока на извършената РСІ болните са разделени на 4 групи: до 3-ия, до 6-ия, до 12-ия и до 24-ия час след началото на инфаркта. Болничният леталитет за всички болни е 6.3%, a до края на 6-ия месец - 13.3%, еднакъв при І-ва и ІІ-ра група и достоверно по-малък, отколкото при ІІІ-та и ІV-та група, по-голям при жените, при болните над 65 г., с ФИ <35.0% и с тромботична оклузия на LM и LAD.The prognosis (in-hospital and post-hospitalization lethality by the end of the 6th moth) of 300 patients (212 men and 88 women) with a first myocardial infarction with ST-elevation (STEMI) at an average age of 62.9 years was studied depending on the timing of the conducted primary coronary intervention (PCI) after the onset of symptoms. Depending on the timing of the conducted PCI, the patients were divided into 4 groups: by the 3rd, 6th, 12th, and 24th hour after the onset of the infarction. The patients` in-hospital lethality was 6.3%, and that by the end of the 6th month - 13.3%. It was the same for groups I and II and significantly lower than in groups III and IV; higher in women, in patients over 65 years of age, with ejection fraction (EF) <35.0% and with thrombotic occlusion of LM and LAD

One year follow-up of physical performance and quality of life in patients surviving COVID-19: a prospective cohort study

INTRODUCTION: The coronavirus disease (COVID-19) continues to affect many countries globally, with the long-term impact of the disease now being recognized. According to the latest research, some of the affected individuals continue to experience functional limitations, reduced physical performance and impaired health-related quality of life (HRQoL) even after eight months. This prospective cohort study aimed to describe the longer-term recovery of physical performance and HRQoL in COVID-19 survivors over one year. METHOD: A cohort (n = 43; 32-84 years old) hospitalized with COVID-19 between March and June 2020 was followed over one year and assessed at three time points: hospital discharge, 3 months and 12 months post-admission. Participants experienced mild (10/43) to critical (6/43) pneumonia and stayed in the hospital for a median of 10 days (IQR 9). Participants were assessed for physical performance (six-minute walk test), HRQoL (EQ-5D-5L), COVID-19 related limitations in functionality (PCFS), hospital-related anxiety and depression (HADS-A/-D), lung function (FEV1, FVC) and dyspnea during activity (mMRC). All assessments were conducted by physiotherapists trained in cardio-respiratory rehabilitation. RESULTS: After discharge, 8/34 showed reduced physical performance, 9/42 had lower HRQoL and 14/32 had COVID-19 induced limitations in functionality on the PCFS scale. Physical performance did not change significantly between discharge and 12-month follow-up, but 15/34 participants showed clinically relevant improvements in walking distance (>30 m). However, 16/34 had a decreased walking distance >30 m when comparing 3-month to 12-month follow-up. At 12 months, 12/41 of participants still perceived COVID-19 related limitations in daily life on the PCFS scale. For HRQoL, 12/41 participants still perceived moderate-to-severe symptoms of pain and discomfort and 13/41 slight-to-severe symptoms of anxiety and depression. CONCLUSION: This cohort of adult patients hospitalized for mild to severe COVID-19 in Switzerland was generally mildly affected but still reported some limitations after one year. These results offer preliminary indications for ongoing support after hospitalization and point towards the need for specific, individualized follow-up to support their recovery. ClinicalTrials.gov (NCT04375709

A Synthesis of the Dibble et al. Controlled Experiments into the Mechanics of Lithic Production

Archaeologists have explored a wide range of topics regarding archaeological stone tools and their connection to past human lifeways through experimentation. Controlled experimentation systematically quantifies the empirical relationships among different flaking variables under a controlled and reproducible setting. This approach offers a platform to generate and test hypotheses about the technological decisions of past knappers from the perspective of basic flaking mechanics. Over the past decade, Harold Dibble and colleagues conducted a set of controlled flaking experiments to better understand flake variability using mechanical flaking apparatuses and standardized cores. Results of their studies underscore the dominant impact of exterior platform angle and platform depth on flake size and shape and have led to the synthesis of a flake formation model, namely the EPA-PD model. However, the results also illustrate the complexity of the flake formation process through the influence of other parameters such as core surface morphology and force application. Here we review the work of Dibble and colleagues on controlled flaking experiments by summarizing their findings to date. Our goal is to synthesize what was learned about flake variability from these controlled experiments to better understand the flake formation process. With this paper, we are including all of the data produced by these prior experiments and an explanation of the data in the Supplementary Information