111 research outputs found

    Measurement of Heat Transfer Coefficients in an Agitated Vessel with Tube Baffles

    Get PDF
    Cooling or heating an agitated liquid is a very common operation in many industrial processes. A classic approach is to transfer the necessary heat through the vessel jacket. Another option, frequently used in the chemical and biochemical industries is to use the heat transfer area of vertical tube baffles. In large equipment, e.g. fermentor, the jacket surface is often not sufficient for large heat transfer requirements and tube baffles can help in such cases. It is then important to know the values of the heat transfer coefficients between the baffles and the agitated liquid. This paper presents the results of heat transfer measurements using the transient method when the agitated liquid is periodically heated and cooled by hot and cold water running through tube baffles. Solving the unsteady enthalpy balance, it is possible to determine the heat transfer coefficient. Our results are summarized by the Nusselt number correlations, which describe the dependency on the Reynolds number, and they are compared with other measurements obtained by a steady-state method

    Heat Transfer at the Bottom of a Cylindrical Vessel Impinged by a Swirling Flow from an Impeller in a Draft Tube

    Get PDF
    Heat transfer at the bottom of a cylindrical vessel impinged by a flow with tangential velocity component generated by an axial-flow impeller in a draft tube was measured using the electrodiffusion experimental method. Local values of the Nusselt numbers along the radial coordinate of the heat transfer surface and corresponding mean values are presented for relatively small distances of the draft tube from the impinged surface (0.25 ≤ h / d ≤ 1). Such small distances are typical for mixing of liquids, which ensures good homogenization and increases the intensity of heat and mass transfer in many industrial operations. Results are compared with literature data for unconfined impinging jets with no tangential velocity components. The additional tangential velocity component generated by the rotating impeller significantly influences the hydrodynamics of the impinging jet and decreases the heat transfer intensity in the case of small distances from the impinged surface. A correlation describing the mean Nusselt number at the vessel bottom is proposed. It can be used in a design of a real industrial piece of equipment with heat transfer situated at the bottom. This work is licensed under a Creative Commons Attribution 4.0 International License

    Heat transfer measurements with TOIRT method

    Full text link
    Temperature Oscillation Infra-Red Thermography (TOIRT) method was used to measure heat transfer coefficients between a at surface and a confined impinging jet generated by an impeller in a difusor and baffled vessel. The TOIRT method is based on measuring a phase-lag between the oscillating heat flux applied to the heat transfer surface and the surface temperature response using a contactless infra-red camera. The phase lag is in a direct relationship with the heat transfer coefficient

    Зміст та основні цілі стимулювання збуту на підприємстві

    Get PDF
    Стаття присвячена висвітленню сутності стимулювання підприємства, як важливої складової для забезпечення ефективного його функціонування, а також проаналізовано головні завдання, та основні переваги та недоліки заходів, які використовуються у системі стимулювання збуту. У статті розглянуто зміст стимулювання збуту продукції підприємства, його цілі та завдання. Виявлено, що стимулювання збуту ‒ це система короткострокових спонукальних заходів на тимчасовій або територіальній основі, що чинить вплив на трьох учасників ринку (споживачів, торгових посередників, торговий персонал), яка покликана стимулювати негайне здійснення покупки і прискорений збут продукції. Наведена характеристика сучасних засобів і прийомів стимулювання збуту. Розглянуто класифікацію стимулювання збуту продукції підприємства за виникненням і впливом на покупців. Дістали подальшого розвитку теоретичні положе ння стимулювання збуту, в тому числі визначення його основних напрямків.The article is devoted to highlighting the essence of stimulating the enterprise as an important component for ensuring its effective functioning, and also analyzed the main tasks and the main advantages and disadvantages of those used in the sales promotion system. The article deals with the content of sales’ promotion in the complex of product promotion, its goals and tasks. It is found that sales promotion is a system of short-term incentives on a temporary or territorial basis, affects three market part icipants (consumers, resellers, sales personnel), which is designed to stimulate immediate purchase and accelerated sales. The characteristic of modern means and methods of sales’ promotion is given. The classification of sales promotion in the work on occurrence and influence on buyers is described. The theoretical positions of sales’ promotion were furt her developed, the main directions of sales promotion were established

    Collapse of a semiflexible polymer in poor solvent

    Full text link
    We investigate the dynamics and the pathways of the collapse of a single, semiflexible polymer in a poor solvent via 3-D Brownian Dynamics simulations. Earlier work indicates that the condensation of semiflexible polymers generically proceeds via a cascade through metastable racquet-shaped, long-lived intermediates towards the stable torus state. We investigate the rate of decay of uncollapsed states, analyze the preferential pathways of condensation, and describe likelihood and lifespan of the different metastable states. The simulation are performed with a bead-stiff spring model with excluded volume interaction and exponentially decaying attractive potential. The semiflexible chain collapse is studied as functions of the three relevant length scales of the phenomenon, i.e., the total chain length LL, the persistence length LpL_p and the condensation length L0=kBTLp/u0L_0 = \sqrt{k_B T L_p/u_0}, where u0u_0 is a measure of the attractive potential per unit length. Two dimensionless ratios, L/LpL/L_p and L0/LpL_0/L_p, suffice to describe the decay rate of uncollapsed states, which appears to scale as (L/Lp)1/3(L0/Lp)(L/L_p)^{1/3} (L_0/L_p). The condensation sequence is described in terms of the time series of the well separated energy levels associated with each metastable collapsed state. The collapsed states are described quantitatively through the spatial correlation of tangent vectors along the chain. We also compare the results obtained with a locally inextensible bead-rod chain and with a phantom bead-spring model. Finally, we show preliminary results on the effects of steady shear flow on the kinetics of collapse.Comment: 9 pages, 8 figure

    Block Copolymer at Nano-Patterned Surfaces

    Full text link
    We present numerical calculations of lamellar phases of block copolymers at patterned surfaces. We model symmetric di-block copolymer films forming lamellar phases and the effect of geometrical and chemical surface patterning on the alignment and orientation of lamellar phases. The calculations are done within self-consistent field theory (SCFT), where the semi-implicit relaxation scheme is used to solve the diffusion equation. Two specific set-ups, motivated by recent experiments, are investigated. In the first, the film is placed on top of a surface imprinted with long chemical stripes. The stripes interact more favorably with one of the two blocks and induce a perpendicular orientation in a large range of system parameters. However, the system is found to be sensitive to its initial conditions, and sometimes gets trapped into a metastable mixed state composed of domains in parallel and perpendicular orientations. In a second set-up, we study the film structure and orientation when it is pressed against a hard grooved mold. The mold surface prefers one of the two components and this set-up is found to be superior for inducing a perfect perpendicular lamellar orientation for a wide range of system parameters

    Organization of Block Copolymers using NanoImprint Lithography: Comparison of Theory and Experiments

    Full text link
    We present NanoImprint lithography experiments and modeling of thin films of block copolymers (BCP). The NanoImprint lithography is used to align perpendicularly lamellar phases, over distances much larger than the natural lamellar periodicity. The modeling relies on self-consistent field calculations done in two- and three-dimensions. We get a good agreement with the NanoImprint lithography setups. We find that, at thermodynamical equilibrium, the ordered BCP lamellae are much better aligned than when the films are deposited on uniform planar surfaces

    Early

    Get PDF
    Arthritis Rheum. 2004 Dec;50(12):3934-40. Early response to immunosuppressive therapy predicts good renal outcome in lupus nephritis: lessons from long-term followup of patients in the Euro-Lupus Nephritis Trial. Houssiau FA, Vasconcelos C, D'Cruz D, Sebastiani GD, de Ramon Garrido E, Danieli MG, Abramovicz D, Blockmans D, Mathieu A, Direskeneli H, Galeazzi M, Gül A, Levy Y, Petera P, Popovic R, Petrovic R, Sinico RA, Cattaneo R, Font J, Depresseux G, Cosyns JP, Cervera R. Université Catholique de Louvain, Brussels, Belgium. [email protected] Abstract OBJECTIVE: In the Euro-Lupus Nephritis Trial (ELNT), 90 patients with lupus nephritis were randomly assigned to a high-dose intravenous cyclophosphamide (IV CYC) regimen (6 monthly pulses and 2 quarterly pulses with escalating doses) or a low-dose IV CYC regimen (6 pulses of 500 mg given at intervals of 2 weeks), each of which was followed by azathioprine (AZA). After a median followup of 41 months, a difference in efficacy between the 2 regimens was not observed. The present analysis was undertaken to extend the followup and to identify prognostic factors. METHODS: Renal function was prospectively assessed quarterly in all 90 patients except 5 who were lost to followup. Survival curves were derived using the Kaplan-Meier method. RESULTS: After a median followup of 73 months, there was no significant difference in the cumulative probability of end-stage renal disease or doubling of the serum creatinine level in patients who received the low-dose IV CYC regimen versus those who received the high-dose regimen. At long-term followup, 18 patients (8 receiving low-dose and 10 receiving high-dose treatment) had developed permanent renal impairment and were classified as having poor long-term renal outcome. We demonstrated by multivariate analysis that early response to therapy at 6 months (defined as a decrease in serum creatinine level and proteinuria <1 g/24 hours) was the best predictor of good long-term renal outcome. CONCLUSION: Long-term followup of patients from the ELNT confirms that, in lupus nephritis, a remission-inducing regimen of low-dose IV CYC followed by AZA achieves clinical results comparable with those obtained with a high-dose regimen. Early response to therapy is predictive of good long-term renal outcome. PMID: 15593207 [PubMed - indexed for MEDLINE

    A proteinuria cut-off level of 0.7 g /day after 12 months of treatment best predicts long-term renal outcome in lupus nephritis: Data from the MAINTAIN Nephritis Trial

    Get PDF
    Background: Although an early decrease in proteinuria has been correlated with good long-term renal outcome in lupus nephritis (LN), studies aimed at defining a cut-off proteinuria value are missing, except a recent analysis performed on patients randomised in the Euro-Lupus Nephritis Trial, demonstrating that a target value of 0.8 g/day at month 12 optimised sensitivity and specificity for the prediction of good renal outcome. The objective of the current work is to validate this target in another LN study, namely the MAINTAIN Nephritis Trial (MNT). Methods: Long-term (at least 7 years) renal function data were available for 90 patients randomised in the MNT. Receiver operating characteristic curves were built to test the performance of proteinuria measured within the 1st year as short-term predictor of long-term renal outcome. We calculated the positive and negative predictive values (PPV, NPV). Results: After 12 months of treatment, achievement of a proteinuria <0.7 g/day best predicted good renal outcome, with a sensitivity and a specificity of 71% and 75%, respectively. The PPV was high (94%) but the NPV low (29%). Addition of the requirement of urine red blood cells 645/hpf as response criteria at month 12 reduced sensitivity from 71% to 41%. Conclusions: In this cohort of mainly Caucasian patients suffering from a first episode of LN in most cases, achievement of a proteinuria <0.7 g/day at month 12 best predicts good outcome at 7 years and inclusion of haematuria in the set of criteria at month 12 undermines the sensitivity of early proteinuria decrease for the prediction of good outcome. The robustness of these conclusions stems from the very similar results obtained in two distinct LN cohorts
    corecore