2,401 research outputs found
Postbuckling behavior of graphite-epoxy panels
Structurally efficient fuselage panels are often designed to allow buckling to occur at applied loads below ultimate. Interest in applying graphite-epoxy materials to fuselage primary structure led to several studies of the post-buckling behavior of graphite-epoxy structural components. Studies of the postbuckling behavior of flat and curved, unstiffened and stiffened graphite-epoxy panels loaded in compression and shear were summarized. The response and failure characteristics of specimens studied experimentally were described, and analytical and experimental results were compared. The specimens tested in the studies described were fabricated from commercially available 0.005-inch-thick unidirectional graphite-fiber tapes preimpregnated with 350 F cure thermosetting epoxy resins
Psychological Issues in Online Adaptive Task Allocation
Adaptive aiding is an idea that offers potential for improvement over many current approaches to aiding in human-computer systems. The expected return of tailoring the system to fit the user could be in the form of improved system performance and/or increased user satisfaction. Issues such as the manner in which information is shared between human and computer, the appropriate division of labor between them, and the level of autonomy of the aid are explored. A simulated visual search task was developed. Subjects are required to identify targets in a moving display while performing a compensatory sub-critical tracking task. By manipulating characteristics of the situation such as imposed task-related workload and effort required to communicate with the computer, it is possible to create conditions in which interaction with the computer would be more or less desirable. The results of preliminary research using this experimental scenario are presented, and future directions for this research effort are discussed
Pilot interaction with automated airborne decision making systems
The use of advanced software engineering methods (e.g., from artificial intelligence) to aid aircraft crews in procedure selection and execution is investigated. Human problem solving in dynamic environments as effected by the human's level of knowledge of system operations is examined. Progress on the development of full scale simulation facilities is also discussed
Pilot interaction with automated airborne decision making systems
Two project areas were pursued: the intelligent cockpit and human problem solving. The first area involves an investigation of the use of advanced software engineering methods to aid aircraft crews in procedure selection and execution. The second area is focused on human problem solving in dynamic environments, particulary in terms of identification of rule-based models land alternative approaches to training and aiding. Progress in each area is discussed
Applications of aerospace technology in biology and medicine
Utilization of National Aeronautics and Space Administration (NASA) technology in medicine is discussed. The objective is best obtained by stimulation of the introduction of new or improved commercially available medical products incorporating aerospace technology. A bipolar donor/recipient model of medical technology transfer is presented to provide a basis for the team's methodology. That methodology is designed to: (1) identify medical problems and NASA technology that, in combination, constitute opportunities for successful medical products; (2) obtain the early participation of industry in the transfer process; and (3) obtain acceptance by the medical community of new medical products based on NASA technology. Two commercial transfers were completed: the Stowaway, a lightweight wheelchair that provides mobility for the disabled and elderly in the cabin of commercial aircraft, and Micromed, a portable medication infusion pump for the reliable, continuous infusion of medications such as heparin or insulin. The marketing and manufacturing factors critical to the commercialization of the lightweight walker incorporating composite materials were studied. Progress was made in the development and commercialization of each of the 18 currently active projects
Effects of cutouts on the behavior of symmetric composite laminates subjected to bending and twisting loads
Composite structures are used for a wide variety of aerospace applications. Practical structures contain cutouts and these structures are subjected to in-plane and out-of-plane loading conditions. Structurally efficient designs for composite structures require a thorough understanding of the effects of cutouts on the response of composite plates subjected to inplane or out-of-plane loadings. Most investigations of the behavior of composite plates with cutouts have considered in-plane loadings only. Out-of-plane loadings suchas bending or twisting have received very limited attention. The response of homogeneous plates (e.g., isotropic or orthotropic plates) subjected to bending or twisting moments has been studied analytically. These analyses are for infinite plates and neglect finite-plate effects. Recently, analytical and experimental studies were conducted to determine the effects of cutouts on the response of laminated composite plates subjected to bending moments. No analytical or experimental results are currently available for the effects of cutouts on the response of composite laminates subjected to twisting moments
Application of Statistical Methods for Improving Models of Intramuscular Percentage Fat Prediction in Live Beef Animals From Real-Time Ultrasound Images
Real-time ultrasound images from the Longissimus dorsi muscle across 11th to 13th ribs of 720 live bulls and steers were acquired over the period of four years. The actual intramuscular percentage of fat (IFAT) was determined using an n-hexane extraction with mean of 4.98%, standard deviation of 2.12%, and range from 1.10% to 14.68%. Image-processing techniques were used to calculate parameters to quantify the image texture patterns. The parameters which showed good correlations with the actual IFAT were used to develop a statistical linear regression model. The accuracy of prediction was very good for the actual IFAT less than or equal to eight (low IFAT group), with root mean square error (RMSE) around 1.0%. However, the model was much less accurate for prediction of IFAT values more than eight (high IFAT group), with RMSE more than 1.5%. One reason for this could be the limited ability of the ultrasound technique to resolve differences in high-IFAT muscles in terms of image texture patterns. Also, this group contained fewer than 10% of the images collected, which may be an inadequate sample. Overall accuracy of prediction was improved by developing different regression models for the low-IFAT and high-IFAT groups. Statistical pattern recognition and classification techniques were applied to “pre-classify” the images into low- or high-IFAT groups before being subjected to regression prediction models. The techniques applied included cluster analysis, discriminant analysis, and classification and regression tree (CART). The classification tree provided the best results with overall classification accuracy around 90% for low- and high-IFAT groups of images. In conclusion, overall accuracy of predicting the IFAT from ultrasound image parameters and regression models can be improved by first isolating the high- IFAT group from low-IFAT group using statistical classification methods
Exact Maximal Height Distribution of Fluctuating Interfaces
We present an exact solution for the distribution P(h_m,L) of the maximal
height h_m (measured with respect to the average spatial height) in the steady
state of a fluctuating Edwards-Wilkinson interface in a one dimensional system
of size L with both periodic and free boundary conditions. For the periodic
case, we show that P(h_m,L)=L^{-1/2}f(h_m L^{-1/2}) for all L where the
function f(x) is the Airy distribution function that describes the probability
density of the area under a Brownian excursion over a unit interval. For the
free boundary case, the same scaling holds but the scaling function is
different from that of the periodic case. Numerical simulations are in
excellent agreement with our analytical results. Our results provide an exactly
solvable case for the distribution of extremum of a set of strongly correlated
random variables.Comment: 4 pages revtex (two-column), 1 .eps figure include
Freezing of Spinodal Decompostion by Irreversible Chemical Growth Reaction
We present a description of the freezing of spinodal decomposition in
systems, which contain simultaneous irreversible chemical reactions, in the
hydrodynamic limit approximation. From own results we conclude, that the
chemical reaction leads to an onset of spinodal decomposition also in the case
of an initial system which is completely miscible and can lead to an extreme
retardation of the dynamics of the spinodal decomposition, with the probability
of a general freezing of this process, which can be experimetally observed in
simultaneous IPN formation.Comment: 10 page
Pilot interaction with automated airborne decision making systems
Progress was made in the three following areas. In the rule-based modeling area, two papers related to identification and significane testing of rule-based models were presented. In the area of operator aiding, research focused on aiding operators in novel failure situations; a discrete control modeling approach to aiding PLANT operators was developed; and a set of guidelines were developed for implementing automation. In the area of flight simulator hardware and software, the hardware will be completed within two months and initial simulation software will then be integrated and tested
- …