High-precision tabletop microplotter for flexible on-demand material deposition in printed electronics and device functionalization

Microstructuring, in particular, the additive functionalization of surfaces with, e.g., conductive or bioactive materials plays a crucial role in many applications in sensing or printed electronics. Mostly, the lithography steps are made prior to assembling functionalized surfaces into the desired places of use within a bigger device as a microfluidic channel or an electronic casing. However, when this is not possible, most lithography techniques struggle with access to recessed or inclined/vertical surfaces for geometrical reasons. In particular, for “on-the-fly” printing aiming to add microstructures to already existing devices on demand and maybe even for one-time trials, e.g., in prototyping, a flexible “micropencil” allowing for direct write under direct manual control and on arbitrarily positioned surfaces would be highly desirable. Here, we present a highly flexible, micromanipulator-based setup for capillary printing of conductive and biomaterial ink formulations that can address a wide range of geometries as exemplified on vertical, recessed surfaces and stacked 3D scaffolds as models for hard to access surfaces. A wide range of feature sizes from tens to hundreds of micrometer can be obtained by the choice of capillary sizes and the on-demand in situ writing capabilities are demonstrated with completion of a circuit structure by gold line interconnects deposited with the setup

SPASMOLYTIC, BRONCHODILATOR AND VASORELAXANT ACTIVITY OF METHANOLIC EXTRACT OF TEPHROSIA PURPUREA

The methanolic extract of the whole plant of Tephrosia pupurea, Linn. was subjected to find out itspossible therapeutic utility to validate its folkloric use in native systems of medicine. The extract on applicationto spontaneous contractions in isolated rabbit jejunum preparations exerted a concentration dependent(0.003-3.0 mg/mL) relaxant effect. The extract also caused concentration dependent relaxation of K+ (80 mM)-induced spastic contractions. These findings were further supported by the observations that the extract causeda concentration dependent right ward shift of the Ca2+ response curves in manner similar to that of verapamil.The extract exhibited a relaxant effect on carbachol and high K+ (80 mM)-induced contractions of isolated rabbittracheal preparations in a manner similar to verapamil. The observed non-specific bronchodilator responseis possibly mediated through Ca2+ channel blockade. Moreover, the extract also exhibited a dose dependentrelaxant effect on phenylephrine (1 μM) and K+ (80 mM)-induced contractions in a manner similar to verapamil.On the basis of the above-mentioned findings, it can be concluded that the use of Tephrosia purpurea, in gastrointestinalspasm, asthma and hypertension is likely to be mediated through calcium channel blockage

Substantial and sustained reduction in under-5 mortality, diarrhea, and pneumonia in Oshikhandass, Pakistan: Evidence from two longitudinal cohort studies 15 years apart

Background: Oshikhandass is a rural village in northern Pakistan where a 1989-1991 verbal autopsy study showed that diarrhea and pneumonia were the top causes of under-5 mortality. Intensive surveillance, active community health education and child health interventions were delivered in 1989-1996; here we assess improvements in under-5 mortality, diarrhea, and pneumonia over this period and 15 years later.Methods: Two prospective open-cohort studies in Oshikhandass from 1989 to 1996 (Study 1) and 2011-2014 (Study 2) enrolled all children under age 60 months. Study staff trained using WHO guidelines, conducted weekly household surveillance and promoted knowledge on causes and management of diarrhea and pneumonia. Information about household characteristics and socioeconomic status was collected. Hurdle models were constructed to examine putative risk factors for diarrhea and pneumonia.Results: Against a backdrop of considerable change in the socioeconomic status of the community, under-5 mortality, which declined over the course of Study 1 (from 114.3 to 79.5 deaths/1000 live births (LB) between 1989 and 1996), exceeded Sustainable Development Goal 3 by Study 2 (19.8 deaths/ 1000 LB). Reductions in diarrhea prevalence (20.3 to 2.2 days/ Child Year [CY]), incidence (2.1 to 0.5 episodes/ CY), and number of bloody diarrhea episodes (18.6 to 5.2%) seen during Study 1, were sustained in Study 2. Pneumonia incidence was 0.5 episodes /CY in Study 1 and 0.2/CY in Study 2; only 5% of episodes were categorized as severe or very severe in both studies. While no individual factors predicted a statistically significant difference in diarrhea or pneumonia episodes, the combined effect of water, toilet and housing materials was associated with a significant decrease in diarrhea; higher household income was the most protective factor for pneumonia in Study 1.Conclusions: We report a 4-fold decrease in overall childhood mortality, and a 2-fold decrease in childhood morbidity from diarrhea and pneumonia in a remote rural village in Pakistan between 1989 and 2014. We conclude that significant, sustainable improvements in child health may be achieved through improved socioeconomic status and promoting interactions between locally engaged health workers and the community, but that continued efforts are needed to improve health worker training, supervision, and the rational use of medications

Substantial and sustained reduction in under-5 mortality, diarrhea, and pneumonia in Oshikhandass, Pakistan : Evidence from two longitudinal cohort studies 15 years apart

Funding Information: Study 1 was funded through the Applied Diarrheal Disease Research Program at Harvard Institute for International Development with a grant from USAID (Project 936–5952, Cooperative Agreement # DPE-5952-A-00-5073-00), and the Aga Khan Health Service, Northern Areas and Chitral, Pakistan. Study 2 was funded by the Pakistan US S&T Cooperative Agreement between the Pakistan Higher Education Commission (HEC) (No.4–421/PAK-US/HEC/2010/955, grant to the Karakoram International University) and US National Academies of Science (Grant Number PGA-P211012 from NAS to the Fogarty International Center). The funding bodies had no role in the design of the study, data collection, analysis, interpretation, or writing of the manuscript. Publisher Copyright: © 2020 The Author(s).Peer reviewedPublisher PD

Finite Element Analysis of Osteosynthesis Screw Fixation in the Bone Stock: An Appropriate Method for Automatic Screw Modelling

The use of finite element analysis (FEA) has grown to a more and more important method in the field of biomedical engineering and biomechanics. Although increased computational performance allows new ways to generate more complex biomechanical models, in the area of orthopaedic surgery, solid modelling of screws and drill holes represent a limitation of their use for individual cases and an increase of computational costs. To cope with these requirements, different methods for numerical screw modelling have therefore been investigated to improve its application diversity. Exemplarily, fixation was performed for stabilization of a large segmental femoral bone defect by an osteosynthesis plate. Three different numerical modelling techniques for implant fixation were used in this study, i.e. without screw modelling, screws as solid elements as well as screws as structural elements. The latter one offers the possibility to implement automatically generated screws with variable geometry on arbitrary FE models. Structural screws were parametrically generated by a Python script for the automatic generation in the FE-software Abaqus/CAE on both a tetrahedral and a hexahedral meshed femur. Accuracy of the FE models was confirmed by experimental testing using a composite femur with a segmental defect and an identical osteosynthesis plate for primary stabilisation with titanium screws. Both deflection of the femoral head and the gap alteration were measured with an optical measuring system with an accuracy of approximately 3 µm. For both screw modelling techniques a sufficient correlation of approximately 95% between numerical and experimental analysis was found. Furthermore, using structural elements for screw modelling the computational time could be reduced by 85% using hexahedral elements instead of tetrahedral elements for femur meshing. The automatically generated screw modelling offers a realistic simulation of the osteosynthesis fixation with screws in the adjacent bone stock and can be used for further investigations

Tumor location and patient characteristics of colon and rectal adenocarcinomas in relation to survival and TNM classes

<p>Abstract</p> <p>Background</p> <p>Old age at diagnosis is associated with poor survival in colorectal cancer (CRC) for unknown reasons. Recent data show that colonoscopy is efficient in preventing left-sided cancers only. We examine the association of Tumor Node Metastasis (TNM) classes with diagnostic age and patient characteristics.</p> <p>Methods</p> <p>The Swedish Family-Cancer Database has data on TNM classes on 6,105 CRC adenocarcinoma patients. Ordinal logistic regression analysis was performed to model tumor characteristics according to age at diagnosis, tumor localization, gender, socioeconomic status, medical region and family history. The results were compared to results from survival analysis.</p> <p>Results</p> <p>The only parameters systematically associated with TNM classes were age and tumor localization. Young age at diagnosis was a risk factor for aggressive CRC, according to stage, N and M with odds ratios (ORs) ranging from 1.80 to 1.93 for diagnosis before age 50 years compared to diagnosis at 80+ years. All tumor characteristics, particularly T, were worse for colon compared to rectal tumors. Right-sided tumors showed worse characteristics for all classifiers but M. The survival analysis on patients diagnosed since 2000 showed a hazard ratio of 0.55 for diagnosis before age 50 years compared to diagnosis at over 80 years and a modestly better prognosis for left-sided compared to right-sided tumors.</p> <p>Conclusions</p> <p>The results showed systematically more aggressive tumors in young compared to old patients. The poorer survival of old patients in colon cancer was not related to the available tumor characteristics. However, these partially agreed with the limited colonoscopic success with right-sided tumors.</p

Socio-economic status and overall and cause-specific mortality in Sweden

<p>Abstract</p> <p>Background</p> <p>Previous studies have reported discrepancies in cause-specific mortality among groups of individuals with different socio-economic status. However, most of the studies were limited by the specificity of the investigated populations and the broad definitions of the causes of death. The aim of the present population-based study was to explore the dependence of disease specific mortalities on the socio-economic status in Sweden, a country with universal health care. Another aim was to investigate possible gender differences.</p> <p>Methods</p> <p>Using the 2006 update of the Swedish Family-Cancer Database, we identified over 2 million individuals with socio-economic data recorded in the 1960 national census. The association between mortality and socio-economic status was investigated by Cox's proportional hazards models taking into account the age, time period and residential area in both men and women, and additionally parity and age at first birth in women.</p> <p>Results</p> <p>We observed significant associations between socio-economic status and mortality due to cardiovascular diseases, respiratory diseases, to cancer and to endocrine, nutritional and metabolic diseases. The influence of socio-economic status on female breast cancer was markedly specific: women with a higher socio-economic status showed increased mortality due to breast cancer.</p> <p>Conclusion</p> <p>Even in Sweden, a country where health care is universally provided, higher socio-economic status is associated with decreased overall and cause-specific mortalities. Comparison of mortality among female and male socio-economic groups may provide valuable insights into the underlying causes of socio-economic inequalities in length of life.</p

Evaluation of Intra-Host Variants of the Entire Hepatitis B Virus Genome

Genetic analysis of hepatitis B virus (HBV) frequently involves study of intra-host variants, identification of which is commonly achieved using short regions of the HBV genome. However, the use of short sequences significantly limits evaluation of genetic relatedness among HBV strains. Although analysis of HBV complete genomes using genetic cloning has been developed, its application is highly labor intensive and practiced only infrequently. We describe here a novel approach to whole genome (WG) HBV quasispecies analysis based on end-point, limiting-dilution real-time PCR (EPLD-PCR) for amplification of single HBV genome variants, and their subsequent sequencing. EPLD-PCR was used to analyze WG quasispecies from serum samples of patients (n = 38) infected with HBV genotypes A, B, C, D, E and G. Phylogenetic analysis of the EPLD-isolated HBV-WG quasispecies showed the presence of mixed genotypes, recombinant variants and sub-populations of the virus. A critical observation was that HBV-WG consensus sequences obtained by direct sequencing of PCR fragments without EPLD are genetically close, but not always identical to the major HBV variants in the intra-host population, thus indicating that consensus sequences should be judiciously used in genetic analysis. Sequence-based studies of HBV WG quasispecies should afford a more accurate assessment of HBV evolution in various clinical and epidemiological settings

Effect of Pneumococcal Conjugate Vaccination on Serotype-Specific Carriage and Invasive Disease in England: A Cross-Sectional Study

A cross sectional study by Stefan Flasche and coworkers document the serotype replacement of Streptococcus pneumoniae that has occurred in England since the introduction of PCV7 vaccination