113 research outputs found
Genetic map construction and quantitative trait loci (QTL) mapping for nitrogen use efficiency and its relationship with productivity and quality of the biennial crop Belgian endive (Cichorium intybus L.)
A genetic study of the biennial crop Belgian endive (Cichorium intybus) was carried out to examine the effect of nitrogen nutrition during the vegetative phase in the control of the productivity and quality of the chicon (etiolated bud), a crop that grows during the second phase of development (forcing process). A population of 302 recombinant inbred lines (RIL) was obtained from the cross between contrasting lines "NS1" and "NR2". A genetic map was constructed and QTLs of several physiological and agronomical traits were mapped under two levels of nitrogen fertilization during the vegetative phase (N- and N+). The agronomical traits showed high broad sense heritability, whereas the physiological traits were characterized by low broad sense heritability. Nitrogen reserves mobilization during the forcing process was negatively correlated with nitrogen reserves content of the tuberized root and common QTLs were detected for these traits. The chicon productivity and quality were not correlated, but showed one common QTL. This study revealed that chicon productivity and quality were genetically associated with nitrogen reserves mobilization that exerts opposite effects on both traits. Chicon productivity was positively correlated with N reserves mobilization under N- and N+ and a common QTL with the same additive effects was detected for both traits. Chicon quality was negatively correlated with N reserves mobilization under N- and N+ and a common QTL with opposite additive effects was detected for both traits. These results lead to the conclusion that N reserves mobilization is a more effective trait than N reserves content in predicting chicon productivity and quality. Finally, this study revealed agronomical and physiological QTLs utilizable by breeders via marker-assisted selection to aid the optimization of chicon quality under adapted N fertilization
Lean meat yield estimation using a prototype 3D imaging approach.
Lean Meat Yield (LMY, %) of carcass is an important industry trait, which currently is not routinely measured in Australian beef abattoirs. Objective on-line technology to determine LMY is key for wider adoption. This paper presents a proof-of-concept approach for estimating the LMY of beef carcasses from the 3D information provided by RGB-D cameras. Moreover, a specifically designed on-line data acquisition system for abattoir applications is presented, consisting of three cameras moving on a scanning rig to generate 3D carcass side reconstructions. The hindquarter is then segmented consistently across all the 3D models to extract curvature information and LMY estimated via non-linear regression based on Gaussian Process models. Sides from 119 carcasses at two different commercial abattoirs were used to evaluate this approach. Results from this preliminary study (RMSEÂ =Â 3.91%, R2Â =Â 0.69) using curvature, P8 fat and HSCW indicate that 3D imaging of beef carcasses is a viable and relatively accurate technology to estimate LMY
Computational pattern making from 3D garment models
We propose a method for computing a sewing pattern of a given 3D garment model. Our algorithm segments an input 3D garment shape into patches and computes their 2D parameterization, resulting in pattern pieces that can be cut out of fabric and sewn together to manufacture the garment. Unlike the general state-of-the-art approaches for surface cutting and flattening, our method explicitly targets garment fabrication. It accounts for the unique properties and constraints of tailoring, such as seam symmetry, the usage of darts, fabric grain alignment, and a flattening distortion measure that models woven fabric deformation, respecting its anisotropic behavior. We bootstrap a recent patch layout approach developed for quadrilateral remeshing and adapt it to the purpose of computational pattern making, ensuring that the deformation of each pattern piece stays within prescribed bounds of cloth stress. While our algorithm can automatically produce the sewing patterns, it is fast enough to admit user input to creatively iterate on the pattern design. Our method can take several target poses of the 3D garment into account and integrate them into the sewing pattern design. We demonstrate results on both skintight and loose garments, showcasing the versatile application possibilities of our approach.</jats:p
A Large Maize (Zea mays L.) SNP Genotyping Array: Development and Germplasm Genotyping, and Genetic Mapping to Compare with the B73 Reference Genome
SNP genotyping arrays have been useful for many applications that require a large number of molecular markers such as high-density genetic mapping, genome-wide association studies (GWAS), and genomic selection. We report the establishment of a large maize SNP array and its use for diversity analysis and high density linkage mapping. The markers, taken from more than 800,000 SNPs, were selected to be preferentially located in genes and evenly distributed across the genome. The array was tested with a set of maize germplasm including North American and European inbred lines, parent/F1 combinations, and distantly related teosinte material. A total of 49,585 markers, including 33,417 within 17,520 different genes and 16,168 outside genes, were of good quality for genotyping, with an average failure rate of 4% and rates up to 8% in specific germplasm. To demonstrate this array's use in genetic mapping and for the independent validation of the B73 sequence assembly, two intermated maize recombinant inbred line populations – IBM (B73×Mo17) and LHRF (F2×F252) – were genotyped to establish two high density linkage maps with 20,913 and 14,524 markers respectively. 172 mapped markers were absent in the current B73 assembly and their placement can be used for future improvements of the B73 reference sequence. Colinearity of the genetic and physical maps was mostly conserved with some exceptions that suggest errors in the B73 assembly. Five major regions containing non-colinearities were identified on chromosomes 2, 3, 6, 7 and 9, and are supported by both independent genetic maps. Four additional non-colinear regions were found on the LHRF map only; they may be due to a lower density of IBM markers in those regions or to true structural rearrangements between lines. Given the array's high quality, it will be a valuable resource for maize genetics and many aspects of maize breeding
Defining and Detecting Crossover-Interference Mutants in Yeast
The analysis of crossover interference in many creatures is complicated by the presence of two kinds of crossovers, interfering and noninterfering. In such creatures, the values of the traditional indicators of interference are subject not only to the strength of interference but also to the relative frequencies of crossing over contributed by the two kinds. We formalize the relationship among these variables and illustrate the possibilities and limitations of classical interference analysis with meiotic tetrad data from wild-type Saccharomyces cerevisiae and from mlh1 and ndj1 mutants
Genome-Wide Crossover Distribution in Arabidopsis thaliana Meiosis Reveals Sex-Specific Patterns along Chromosomes
In most species, crossovers (COs) are essential for the accurate segregation of homologous chromosomes at the first meiotic division. Their number and location are tightly regulated. Here, we report a detailed, genome-wide characterization of the rate and localization of COs in Arabidopsis thaliana, in male and female meiosis. We observed dramatic differences between male and female meiosis which included: (i) genetic map length; 575 cM versus 332 cM respectively; (ii) CO distribution patterns: male CO rates were very high at both ends of each chromosome, whereas female CO rates were very low; (iii) correlations between CO rates and various chromosome features: female CO rates correlated strongly and negatively with GC content and gene density but positively with transposable elements (TEs) density, whereas male CO rates correlated positively with the CpG ratio. However, except for CpG, the correlations could be explained by the unequal repartition of these sequences along the Arabidopsis chromosome. For both male and female meiosis, the number of COs per chromosome correlates with chromosome size expressed either in base pairs or as synaptonemal complex length. Finally, we show that interference modulates the CO distribution both in male and female meiosis
"Hodie Legimus in Libro Experientiae". A Apropriação Heideggeriana da Fórmula de Bernardo de Claraval
Genetic and Physiological Analysis of Iron Biofortification in Maize Kernels
BACKGROUND: Maize is a major cereal crop widely consumed in developing countries, which have a high prevalence of iron (Fe) deficiency anemia. The major cause of Fe deficiency in these countries is inadequate intake of bioavailable Fe, where poverty is a major factor. Therefore, biofortification of maize by increasing Fe concentration and or bioavailability has great potential to alleviate this deficiency. Maize is also a model system for genomic research and thus allows the opportunity for gene discovery. Here we describe an integrated genetic and physiological analysis of Fe nutrition in maize kernels, to identify loci that influence grain Fe concentration and bioavailability. METHODOLOGY: Quantitative trait locus (QTL) analysis was used to dissect grain Fe concentration (FeGC) and Fe bioavailability (FeGB) from the Intermated B73 × Mo17 (IBM) recombinant inbred (RI) population. FeGC was determined by ion coupled argon plasma emission spectroscopy (ICP). FeGB was determined by an in vitro digestion/Caco-2 cell line bioassay. CONCLUSIONS: Three modest QTL for FeGC were detected, in spite of high heritability. This suggests that FeGC is controlled by many small QTL, which may make it a challenging trait to improve by marker assisted breeding. Ten QTL for FeGB were identified and explained 54% of the variance observed in samples from a single year/location. Three of the largest FeGB QTL were isolated in sister derived lines and their effect was observed in three subsequent seasons in New York. Single season evaluations were also made at six other sites around North America, suggesting the enhancement of FeGB was not specific to our farm site. FeGB was not correlated with FeGC or phytic acid, suggesting that novel regulators of Fe nutrition are responsible for the differences observed. Our results indicate that iron biofortification of maize grain is achievable using specialized phenotyping tools and conventional plant breeding techniques
Synapsis and Meiotic Recombination in Male Chinese Muntjac (Muntiacus reevesi)
The muntjacs (Muntiacus, Cervidae) have been extensively studied in terms of chromosomal and karyotypic evolution. However, little is known about their meiotic chromosomes particularly the recombination patterns of homologous chromosomes. We used immunostained surface spreads to visualise synaptonemal complexes (SCs), recombination foci and kinetochores with antibodies against marker proteins. As in other mammals pachytene was the longest stage of meiotic prophase. 39.4% of XY bivalents lacked MLH1 foci compared to less than 0.5% of autosomes. The average number of MLH1 foci per pachytene cell in M. reevesi was 29.8. The distribution of MLH1 foci differed from other mammals. On SCs with one focus, the distribution was more even in M. reevesi than in other mammals; for SCs that have two or more MLH1 foci, usually there was a larger peak in the sub-centromere region than other regions on SC in M. reevesi. Additionally, there was a lower level of interference between foci in M. reevesi than in mouse or human. These observations may suggest that the regulation of homologous recombination in M. reevesi is slightly different from other mammals and will improve our understanding of the regulation of meiotic recombination, with respect to recombination frequency and position
- …