Multi-scale X-ray Tomography of Solder Interconnects in Microelectronics

Advanced packaging, including 3D IC integration, is one of the main drivers in packaging and system integration to meet the requirements for miniaturized smart systems with high functionality and high performance. For 3D stacking of wafers or dies, interconnections like micro solder bumps and Cu pillars are used. Figure 1 (left) shows a stack with a TSV interposer structure [1]. 3D-stacked products and advanced packaging challenge materials and process characterization. The control of the micro-bump quality is a particular issue. Special tasks are the characterization of the geometry of the solder bumps to estimate the stress enhancement risks, the nondestructive imaging of micron-size pores and of intermetallic phases as well as the visualization of cracks. Several NDE techniques for metrology and failure analysis are currently under discussion. In this paper, the potential and the limits of micro XCT and nano XCT for NDE of solder interconnects are described. Strategies for nondestructive evaluation of geometry, materials and defects are discussed. It is shown that multi-scale imaging with several resolution ranges is one potential approach. Micro XCT (resolution about 1 m) and nano XCT (resolution about 50 nm) are very useful lab-based techniques with a promising prospect for the future. We demonstrate the capabilities for nondestructive imaging of multi-die stacks with TSVs and micro solder bumps. Figure 1 (middle and right) right demonstrates a micro XCT overview and a nano XCT ROI study of such a multi-die stack with solder interconnects. An analysis of individual solder bumps reveals mismatches in relative positioning, variability in the shape, micron-size pores, and the distribution of intermetallic phases. This information is important to evaluate the respective process steps (process control) and the product reliability (quality control). Since deviations from the targeted geometry and defects are difficult to locate precisely from a two-dimensional image, X-ray computed tomography has to be applied

Hip MRI in flexion abduction external rotation for assessment of the ischiofemoral interval in patients with hip pain-a feasibility study.

OBJECTIVES To assess the feasibility of flexion-abduction-external rotation (FABER) magnetic resonance imaging (MRI) of the hip to visualize changes in the ischiofemoral interval and ability to provoke foveal excursion over the acetabular rim. METHODS IRB-approved retrospective single-center study. Patients underwent non-contrast 1.5-T hip MRI in the neutral and FABER position. Two readers measured the ischiofemoral interval at three levels: proximal/distal intertrochanteric distance and ischiofemoral space. Subgroup analysis was performed for hips with/without high femoral torsion, or quadratus femoris muscle edema (QFME), respectively. A receiver operating curve with calculation of the area under the curve (AUC) for the prediction of QFME was calculated. The presence of foveal excursion in both positions was assessed. RESULTS One hundred ten patients (121 hips, mean age 34 ± 11 years, 67 females) were evaluated. FABER-MRI led to narrowing (both p < .001) of the ischiofemoral interval which decreased more at the proximal (mean decrease by 26 ± 7 mm) than at the distal (6 ± 7 mm) intertrochanteric ridge. With high femoral torsion/ QFME, the ischiofemoral interval was significantly narrower at all three measurement locations compared to normal torsion/no QFME (p < .05). Accuracy for predicting QFME was high with an AUC of .89 (95% CI .82-.94) using a threshold of ≤ 7 mm for the proximal intertrochanteric distance. With FABER-MRI foveal excursion was more frequent in hips with QFME (63% vs 25%; p = .021). CONCLUSION Hip MRI in the FABER position is feasible, visualizes narrowing of the ischiofemoral interval, and can provoke foveal excursion. CRITICAL RELEVANCE STATEMENT FABER MRI may be helpful in diagnosing ischiofemoral impingement and detecting concomitant hip instability by overcoming shortcomings of static MR protocols that do not allow visualization of dynamic changes in the ischiofemoral interval and thus may improve surgical decision making. KEY POINTS • FABER MRI enables visualization of narrowing of the ischiofemoral interval proximal to the lesser trochanter. • Proximal intertrochanteric distance of ≤ 7 mm accurately predicts quadratus femoris muscle edema. • Foveal excursion was more frequent in hips with quadratus femoris muscle edema

Are degenerative findings detected on traction MR arthrography of the hip associated with failure of arthroscopic femoroacetabular impingement surgery?

OBJECTIVES To identify preoperative degenerative features on traction MR arthrography associated with failure after arthroscopic femoroacetabular impingement (FAI) surgery. METHODS Retrospective study including 102 patients (107 hips) undergoing traction magnetic resonance arthrography (MRA) of the hip at 1.5 T and subsequent hip arthroscopic FAI surgery performed (01/2016 to 02/2020) with complete follow-up. Clinical outcomes were assessed using the International Hip Outcome Tool (iHOT-12) score. Clinical endpoint for failure was defined as an iHOT-12 of < 60 points or conversion to total hip arthroplasty. MR images were assessed by two radiologists for presence of 9 degenerative lesions including osseous, chondrolabral/ligamentum teres lesions. Uni- and multivariate Cox regression analysis was performed to assess the association between MRI findings and failure of FAI surgery. RESULTS Of the 107 hips, 27 hips (25%) met at least one endpoint at a mean 3.7 ± 0.9 years follow-up. Osteophytic changes of femur or acetabulum (hazard ratio [HR] 2.5-5.0), acetabular cysts (HR 3.4) and extensive cartilage (HR 5.1) and labral damage (HR 5.5) > 2 h on the clockface were univariate risk factors (all p  2 h on the clockface (HR 3.2, p = 0.01), central femoral osteophyte (HR 3.1, p = 0.02), and femoral cartilage damage with ligamentum teres damage (HR 3.0, p = 0.04). CONCLUSION Joint damage detected by preoperative traction MRA is associated with failure 4 years following arthroscopic FAI surgery and yields promise in preoperative risk stratification. CLINICAL RELEVANCE STATEMENT Evaluation of negative predictors on preoperative traction MR arthrography holds the potential to improve risk stratification based on the already present joint degeneration ahead of FAI surgery. KEY POINTS • Osteophytes, acetabular cysts, and extensive chondrolabral damage are risk factors for failure of FAI surgery. • Extensive acetabular cartilage damage, central femoral osteophytes, and combined femoral cartilage and ligamentum teres damage represent independent negative predictors. • Survival rates following hip arthroscopy progressively decrease with increasing prevalence of these three degenerative findings

Interfacial Covalent Bonds Regulated Electron-Deficient 2D Black Phosphorus for Electrocatalytic Oxygen Reactions

Developing resource-abundant and sustainable metal-free bifunctional oxygen electrocatalysts is essential for the practical application of zinc–air batteries (ZABs). 2D black phosphorus (BP) with fully exposed atoms and active lone pair electrons can be promising for oxygen electrocatalysts, which, however, suffers from low catalytic activity and poor electrochemical stability. Herein, guided by density functional theory (DFT) calculations, an efficient metal-free electrocatalyst is demonstrated via covalently bonding BP nanosheets with graphitic carbon nitride (denoted BP-CN-c). The polarized P-N covalent bonds in BP-CN-c can efficiently regulate the electron transfer from BP to graphitic carbon nitride and significantly promote the OOH* adsorption on phosphorus atoms. Impressively, the oxygen evolution reaction performance of BP-CN-c (overpotential of 350 mV at 10 mA cm−2, 90% retention after 10 h operation) represents the state-of-the-art among the reported BP-based metal-free catalysts. Additionally, BP-CN-c exhibits a small half-wave overpotential of 390 mV for oxygen reduction reaction, representing the first bifunctional BP-based metal-free oxygen catalyst. Moreover, ZABs are assembled incorporating BP-CN-c cathodes, delivering a substantially higher peak power density (168.3 mW cm−2) than the Pt/C+RuO2-based ZABs (101.3 mW cm−2). The acquired insights into interfacial covalent bonds pave the way for the rational design of new and affordable metal-free catalysts. © 2021 The Authors. Advanced Materials published by Wiley-VCH Gmb

Nuclear Polarization of Molecular Hydrogen Recombined on a Non-metallic Surface

The nuclear polarization of $\mathrm{H}_2$ molecules formed by recombination of nuclear polarized H atoms on the surface of a storage cell initially coated with a silicon-based polymer has been measured by using the longitudinal double-spin asymmetry in deep-inelastic positron-proton scattering. The molecules are found to have a substantial nuclear polarization, which is evidence that initially polarized atoms retain their nuclear polarization when absorbed on this type of surfac

First Measurement of the Tensor Structure Function b1b_1 of the Deuteron

The \Hermes experiment has investigated the tensor spin structure of the deuteron using the 27.6 GeV/c positron beam of \Hera. The use of a tensor polarized deuteron gas target with only a negligible residual vector polarization enabled the first measurement of the tensor asymmetry \At and the tensor structure function \bd for average values of the Bj{\o}rken variable $0.01<0.45$ and of the squared four-momentum transfer $0.5 {\rm GeV^2} <5 {\rm GeV^2}$. The quantities \At and \bd are found to be non-zero. The rise of \bd for decreasing values of $x$ can be interpreted to originate from the same mechanism that leads to nuclear shadowing in unpolarized scattering

Single-spin asymmetries in semi-inclusive deep-inelastic scattering on a transversely polarized hydrogen target

Single-spin asymmetries for semi-inclusive electroproduction of charged pions in deep-inelastic scattering of positrons are measured for the first time with transverse target polarization. The asymmetry depends on the azimuthal angles of both the pion ($\phi$) and the target spin axis ($\phi_S$) about the virtual photon direction and relative to the lepton scattering plane. The extracted Fourier component \cmpi is a signal of the previously unmeasured quark transversity distribution, in conjunction with the so-called Collins fragmentation function, also unknown. The Fourier component \smpi of the asymmetry arises from a correlation between the transverse polarization of the target nucleon and the intrinsic transverse momentum of quarks, as represented by the previously unmeasured Sivers distribution function. Evidence for both signals is observed, but the Sivers asymmetry may be affected by exclusive vector meson productio