173,122 research outputs found
Analysis of a single-fold deployable truss beam preloaded by extension of selected face diagonal members
A technique for preloading a deployable box truss beam by extension of one face diagonal per bay was studied to determine if it would result in uniform loading of truss joints without causing excessive truss deformations. Results indicate that it is possible to accomplish uniform loading in the beam region way from beam boundaries, whereas in the regions near boundaries the member loading becomes non-uniform with magnitudes greater than those in the uniform load region. Also, the type of deformation which results in the beam depends on the pattern of preloaded members
Micro heat exchanger by using MEMS impinging jets
A micro impinging-jet heat exchanger is presented here. Heat transfer is studied for single jet, slot arrays and jet arrays. In order to facilitate micro heat transfer measurements with these devices, a MEMS sensor chip, which has an 8 x 8 temperature-sensor array on one side, and an integrated heater on the other side has been designed and fabricated. This sensor chip allows 2-D surface temperature
measurement with various jets impinging on it. It is
found that micro impinging jets can be highly efficient when compared to existing macro impinging-jet microelectronics packages such as IBM 4381. For example, using a single nozzle jet (500-μm diameter driven by 5 psig pressure), the sensor chip (2 x 2 cm^2) temperature can be cooled down from 70 to 33°C. The cooling becomes more efficient when
nozzle arrays (4x5 over 1 cm^2 area) are used under
the same driving pressure. Interestingly, although
higher driving pressure gives better cooling (lower
surface temperature), the cooling efficiency, defined
as h/0.5pv^2, is actually higher for lower driving
pressure
Hidden symmetry and quantum phases in spin-3/2 cold atomic systems
Optical traps and lattices provide a new opportunity to study strongly
correlated high spin systems with cold atoms. In this article, we review the
recent progress on the hidden symmetry properties in the simplest high spin
fermionic systems with hyperfine spin , which may be realized with atoms
of Cs, Be, Ba, Ba, and Hg. A {\it generic}
SO(5) or isomorphically, ) symmetry is proved in such systems with the
s-wave scattering interactions in optical traps, or with the on-site Hubbard
interactions in optical lattices. Various important features from this high
symmetry are studied in the Fermi liquid theory, the mean field phase diagram,
and the sign problem in quantum Monte-Carlo simulations. In the s-wave quintet
Cooper pairing phase, the half-quantum vortex exhibits the global analogue of
the Alice string and non-Abelian Cheshire charge properties in gauge theories.
The existence of the quartetting phase, a four-fermion counterpart of the
Cooper pairing phase, and its competition with other orders are studied in one
dimensional spin-3/2 systems. We also show that counter-intuitively quantum
fluctuations in spin-3/2 magnetic systems are even stronger than those in
spin-1/2 systems
Controlled multibody dynamics simulation for large space structures
Multibody dynamics discipline, and dynamic simulation in control structure interaction (CSI) design are discussed. The use, capabilities, and architecture of the Large Angle Transient Dynamics (LATDYN) code as a simulation tool are explained. A generic joint body with various types of hinge connections; finite element and element coordinate systems; results of a flexible beam spin-up on a plane; mini-mast deployment; space crane and robotic slewing manipulations; a potential CSI test article; and multibody benchmark experiments are also described
Recommended from our members
Bioinspired Multifunctional Anti-icing Hydrogel
The recent anti-icing strategies in the state of the art mainly focused on three aspects: inhibiting ice nucleation, preventing ice propagation, and decreasing ice adhesion strength. However, it is has proved difficult to prevent ice nucleation and propagation while decreasing adhesion simultaneously, due to their highly distinct, even contradictory design principles. In nature, anti-freeze proteins (AFPs) offer a prime example of multifunctional integrated anti-icing materials that excel in all three key aspects of the anti-icing process simultaneously by tuning the structures and dynamics of interfacial water. Here, inspired by biological AFPs, we successfully created a multifunctional anti-icing material based on polydimethylsiloxane-grafted polyelectrolyte hydrogel that can tackle all three aspects of the anti-icing process simultaneously. The simplicity, mechanical durability, and versatility of these smooth hydrogel surfaces make it a promising option for a wide range of anti-icing applications
A suspended microchannel with integrated temperature sensors for high-pressure flow studies
A freestanding microchannel, with integrated temperature sensors, has been developed for high-pressure flow studies. These microchannels are approximately 20ÎĽm x 2ÎĽm x 4400ÎĽm, and are suspended above 80 ÎĽm deep cavities, bulk micromachined using BrF3 dry etch. The calibration of the lightly boron-doped thermistor-type sensors shows that the resistance sensitivity of these integrated sensors is parabolic with respect to temperature and linear with respect to pressure. Volumetric flow rates of N2 in the microchannel were measured at inlet pressures up to 578 psig. The discrepancy between the data and theory results from the flow acceleration in a channel, the non-parabolic velocity profile, and the bulging of the channel. Bulging effects were evaluated by using incompressible water flow measurements, which also measures 1.045x10^-3N-s/m^2 for the viscosity of DI water. The temperature data from sensors on the channel shows the heating of the channel due to the friction generated by the high-pressure flow inside
Structural Relaxation and Mode Coupling in a Simple Liquid: Depolarized Light Scattering in Benzene
We have measured depolarized light scattering in liquid benzene over the
whole accessible temperature range and over four decades in frequency. Between
40 and 180 GHz we find a susceptibility peak due to structural relaxation. This
peak shows stretching and time-temperature scaling as known from
relaxation in glass-forming materials. A simple mode-coupling model provides
consistent fits of the entire data set. We conclude that structural relaxation
in simple liquids and relaxation in glass-forming materials are
physically the same. A deeper understanding of simple liquids is reached by
applying concepts that were originally developed in the context of
glass-transition research.Comment: submitted to New J. Phy
- …