16 research outputs found
Recommended from our members
Self-stabilized discharge filament in plane-parallel barrier discharge configuration: formation, breakdown mechanism, and memory effects
Single self-stabilized discharge filaments were investigated in the plane-parallel electrode configuration. The barrier discharge was operated inside a gap of 3âmm shielded by glass plates to both electrodes, using helium-nitrogen mixtures and a square-wave feeding voltage at a frequency of 2âkHz. The combined application of electrical measurements, ICCD camera imaging, optical emission spectroscopy and surface charge diagnostics via the electro-optic Pockels effect allowed the correlation of the discharge development in the volume and on the dielectric surfaces. The formation criteria and existence regimes were found by systematic variation of the nitrogen admixture to helium, the total pressure and the feeding voltage amplitude. Single self-stabilized discharge filaments can be operated over a wide parameter range, foremost, by significant reduction of the voltage amplitude after the operation in the microdischarge regime. Here, the outstanding importance of the surface charge memory effect on the long-term stability was pointed out by the recalculated spatio-temporally resolved gap voltage. The optical emission revealed discharge characteristics that are partially reminiscent of both the glow-like barrier discharge and the microdischarge regime, such as a Townsend pre-phase, a fast cathode-directed ionization front during the breakdown and radially propagating surface discharges during the afterglow
Recommended from our members
Surface charge measurements on different dielectrics in diffuse and filamentary barrier discharges
Previously, we reported on the measurement of surface charges during the operation of barrier discharges (BDs) using the electro-optic Pockels effect of a bismuth silicon oxide (BSO) crystal. With the present work, the next milestone is achieved by making this powerful method accessible to various dielectrics which are typically used in BD configurations. The dynamics and spatial distribution of positive and negative surface charges were determined on optically transparent borosilicate glass, mono-crystalline alumina and magnesia, respectively, covering the BSO crystal. By variation of the nitrogen admixture to helium and the pressure between 500 mbar and 1 bar, both the diffuse glow-like BD and the self-stabilized discharge filaments were operated inside of a gas gap of 3 mm. The characteristics of the discharge and, especially, the influence of the different dielectrics on its development were studied by surface charge diagnostics, electrical measurements and ICCD camera imaging. Regarding the glow-like BD, the breakdown voltage changes significantly by variation of the cathodic dielectric, due to the different effective secondary electron emission (SEE) coefficients. These material-specific SEE yields were estimated using Townsend's criterion in combination with analytical calculations of the effective ionization coefficient in helium with air impurities. Moreover, the importance of the surface charge memory effect for the self-stabilization of discharge filaments was quantified by the recalculated spatio-temporal behavior of the gap voltage
Surface electrons at plasma walls
In this chapter we introduce a microscopic modelling of the surplus electrons
on the plasma wall which complements the classical description of the plasma
sheath. First we introduce a model for the electron surface layer to study the
quasistationary electron distribution and the potential at an unbiased plasma
wall. Then we calculate sticking coefficients and desorption times for electron
trapping in the image states. Finally we study how surplus electrons affect
light scattering and how charge signatures offer the possibility of a novel
charge measurement for dust grains.Comment: To appear in Complex Plasmas: Scientific Challenges and Technological
Opportunities, Editors: M. Bonitz, K. Becker, J. Lopez and H. Thomse
Hypergravity effects on glide arc plasma
The behaviour of a special type of electric discharge â the gliding arc plasma â has been investigated in hypergravity (1g â18g) using the Large Diameter Centrifuge (LDC) at ESA/ESTEC. The discharge voltage and current together with the videosignal from a fast camera have been recorded during the experiment. The gliding of the arc is governed by hot gas buoyancy and by consequence, gravity. Increasing the centrifugal acceleration makes the glide arc movement substantially faster. Whereas at 1g the discharge was stationary, at 6g it glided with 7 Hz frequency and at 18g the gliding frequency was 11 Hz. We describe a simple model for the glide arc movement assuming low gas flow velocities, which is compared to our experimental results
Impact of volume and surface processes on the pre-ionization of dielectric barrier discharges: advanced diagnostics and fluid modeling
The phenomenology and breakdown mechanism of dielectric barrier discharges are strongly determined by volume and surface memory effects. In particular, the pre-ionization provided by residual species in the volume or surface charges on the dielectrics influences the breakdown behavior of filamentary and diffuse discharges. This was investigated by advanced diagnostics such as streak camera imaging, laser photodetachment of negative ions and laser photodesorption of electrons from dielectric surfaces in correlation with 1D fluid modeling. The streak camera images show that an increasing number of residual charges in the volume changes the microdischarge breakdown in air-like gas mixtures from a cathode-directed streamer to a simultaneous propagation of cathode- and anode-directed streamers. In contrast, seed electrons are important for the pre-ionization if the density of residual charges in the volume is low. One source of seed electrons are negative ions, whose density exceeds the electron density during the pre-phase of diffuse heliumâoxygen barrier discharges as indicated by the laser photodetachment experiments. Electrons desorbed from the cathodic dielectric have an even larger influence. They induce a transition from the glow-like to the Townsend-like discharge mode in nominally pure helium. Apart from analyzing the importance of the pre-ionization for the breakdown mechanism, the opportunities for manipulating the lateral structure and discharge modes are discussed. For this purpose, the intensity and diameter of a diffuse discharge in helium are controlled by an illuminated semiconducting barrier
Resolved PâMetalated Nucleoside Phosphoramidites
The
synthesis of resolved P-metalated nucleoside phosphoramidites is described.
These rare compounds were initially prepared with gold as the metal
center; however, the gold can be removed using basic phosphines or
solid-supported triphenylphosphine. Treatment of the free nucleoside
phosphoramidite with a platinum source generated a unique platinated
dinucleoside species with a diastereomeric ratio of >99:1