PLA and PBAT-based electrospun fibers functionalized with antibacterial bio-based polymers

Antimicrobial fibers based on biodegradable polymers, poly(lactic acid) (PLA), and poly(butylene adipate-co-terephthalate) (PBAT) are prepared by electrospinning. For this purpose, a biodegradable/bio-based polyitaconate containing azoles groups (PTTI) is incorporated at 10 wt.% into the electrospinning formulations. The resulting fibers functionalized with azole moieties are uniform and free of beads. Then, the accessible azole groups are subjected to N-alkylation, treatment that provides cationic azolium groups with antibacterial activity at the surface of fibers. The positive charge density, roughness, and wettability of the cationic fibers are evaluated and compared with flat films. It is confirmed that these parameters exert an important effect on the antimicrobial properties, as well as the length of the alkylating agent and the hydrophobicity of the matrix. The quaternized PLA/PTTI fibers exhibit the highest efficiency against the tested bacteria, yielding a 4-Log reduction against S. aureus and 1.7-Log against MRSA. Then, biocompatibility and bioactivity of the fibers are evaluated in terms of adhesion, morphology and viability of fibroblasts. The results show no cytotoxic effect of the samples, however, a cytostatic effect is appreciated, which is ascribed to the strong electrostatic interactions between the positive charge at the fiber surface and the negative charge of the cell membranes

Anti-tumour activity of tachykinin NK1receptor antagonists on human glioma U373 MG xenograft

Astrocytes harbour functional receptors to many neurotransmitters, including substance P (SP), an undecapeptide belonging to the tachykinin family of peptide transmitters. SP activates malignant glial cells to induce cytokine release and proliferation, both responses being relevant for tumour progression. In tumours developed in nude mice transplanted subcutaneously (s.c.) to U373 MG human glioma cells, the presence of SP was observed at immunohistochemistry. Although the administration of exogenous SP did not significantly affect the size or development of U373 MG xenograft, a role of SP in supporting glioma progression in vivo was highlighted by the tumour growth inhibition induced by highly specific and selective human tachykinin NK1receptor antagonists (MEN 11467 and MEN 11149). The anti-tumour activity of MEN 11467 was observed both with s.c. or intravenous treatments and was partially reverted by the concomitant administration of exogenous SP. Doxorubicin did not show any activity in controlling U373 MG growth in this in vivo model. A novel therapeutic approach to treat malignant gliomas with tachykinin NK1receptor antagonists is suggested by these findings. © 2000 Cancer Research Campaig

The role of MTHFR polymorphisms in the risk of lipedema

Objective: This study examines the role of MTHFR gene polymorphism (rs1801133) in women with lipedema (LIPPY) body composition parameters compared to a control group (CTRL). Subjects and methods: We carried out a study on a sample of 45 LIPPY and 50 women as a CTRL. Body composition parameters were examined by Dual-energy X-ray Absorptiometry (DXA). A genetic test was performed for the MTHFR polymorphism (rs1801133, 677C>T) using a saliva sample for LIPPY and CTRL groups. Mann-Whitney tests evaluated statistically significant differences between four groups (carriers and non-carriers of the MTHFR polymorphism for LIPPY and CTRL groups) on anthropometric/body composition parameters to identify patterns. Results: LIPPY showed significantly higher (p<0.05) anthropometric parameters (weight, BMI, waist, abdominal, hip circumferences) and lower waist/hip ratio (p<0.05) compared to the CTRL group. The association between the polymorphism alleles related to the rs1801133 MTHFR gene and the body composition values LIPPY carriers (+) showed an increase in fat tissue of legs and fat region of legs percentage, arm's fat mass (g), leg's fat mass (g), and leg's lean mass (g) (p<0.05) compared to CTRL (+). Lean/fat arms and lean/fat legs were lower (p<0.05) in LIPPY (+) than in CTRL (+). In the LIPPY (+), the risk of developing the lipedema disease was 2.85 times higher (OR=2.85; p<0.05; 95% confidence interval = 0.842-8.625) with respect to LIPPY (-) and CTRL. Conclusions: The presence or absence of MTHFR polymorphism offers predictive parameters that could better characterize women with lipedema based on the association between body composition and MTHFR presence

Evaporation and fluid dynamics of a sessile drop of capillary size

Theoretical description and numerical simulation of an evaporating sessile drop are developed. We jointly take into account the hydrodynamics of an evaporating sessile drop, effects of the thermal conduction in the drop and the diffusion of vapor in air. A shape of the rotationally symmetric drop is determined within the quasistationary approximation. Nonstationary effects in the diffusion of the vapor are also taken into account. Simulation results agree well with the data of evaporation rate measurements for the toluene drop. Marangoni forces associated with the temperature dependence of the surface tension, generate fluid convection in the sessile drop. Our results demonstrate several dynamical stages of the convection characterized by different number of vortices in the drop. During the early stage the street of vortices arises near a surface of the drop and induces a non-monotonic spatial distribution of the temperature over the drop surface. The initial number of near-surface vortices in the drop is controlled by the Marangoni cell size which is similar to that given by Pearson for flat fluid layers. This number quickly decreases with time, resulting in three bulk vortices in the intermediate stage. The vortices finally transform into the single convection vortex in the drop, existing during about 1/2 of the evaporation time.Comment: 23 pages, 12 figure

Drying of a Microdroplet of Water Suspension of Nanoparticles: from Surface Aggregates to Microcrystal

The method of formation of nanoparticle aggregates such as high-coverage spherical shells of microspheres or 3-D micro crystals grown in the geometry unaffected by a substrate is described. In the reported experiment, the evaporation of single levitated water droplet containing 200 nm diameter polystyrene spheres was studied. Successive stages of the drying process were discussed by analyzing the intensity of light elastically scattered by the evaporating droplet. The numerically simulated self-assembly coincides nicely with the observed morphologies resulting from transformation of a droplet of suspension into a solid microcrystal via kinetically driven self-assembly of nanostructures.Comment: 5 pages, 6 figure

Dynamically controlled deposition of colloidal nanoparticles suspension in evaporating drops using laser radiation

Dynamic control of the distribution of polystyrene suspended nanoparticles in evaporating droplets is investigated using a 2.9 μm high power laser. Under laser radiation a droplet is locally heated and fluid flows are induced that overcome the capillary flow, and thus a reversal of the coffee-stain effect is observed. Suspension particles are accumulated in a localised area, one order of magnitude smaller than the original droplet size. By scanning the laser beam over the droplet, particles can be deposited in an arbitrary pattern. This finding raises the possibility for direct laser writing of suspended particles through a liquid layer. Furthermore, a highly uniform coating is possible by manipulating the laser beam diameter and exposure time. The effect is expected to be universally applicable to aqueous solutions independent of solutes (either particles or molecules) and deposited substrates

Mesenchymal Stem Cells in Early Entry of Breast Cancer into Bone Marrow

BACKGROUND: An understanding of BC cell (BCC) entry into bone marrow (BM) at low tumor burden is limited when compared to highly metastatic events during heavy tumor burden. BCCs can achieve quiescence, without interfering with hematopoiesis. This occurs partly through the generation of gap junctions with BM stroma, located close to the endosteum. These events are partly mediated by the evolutionary conserved gene, Tac1. METHODOLOGY/PRINCIPAL FINDINGS: This study focuses on the role of mesenchymal stem cells (MSCs), Tac1, SDF-1 and CXCR4 in BCC entry into BM. The model is established in studies with low numbers of tumor cells, and focuses on cancer cells with low metastatic and invasion potential. This allowed us to recapitulate early event, and to study cancer cells with low invasive potential, even when they are part of larger numbers of highly metastatic cells. A novel migration assay showed a facilitating role of MSCs in BCC migration across BM endothelial cells. siRNA and ectopic expression studies showed a central role for Tac1 and secondary roles for SDF-1alpha and CXCR4. We also observed differences in the mechanisms between low invasive and highly metastatic cells. The in vitro studies were verified in xenogeneic mouse models that showed a preference for low invasive BCCs to BM, but comparable movement to lung and BM by highly metastatic BCCs. The expressions of Tac1 and production of SDF-1alpha were verified in primary BCCs from paired samples of BM aspirates and peripheral blood. CONCLUSIONS/SIGNIFICANCE: MSC facilitate BCC entry into BM, partly through Tac1-mediated regulation of SDF-1alpha and CXCR4. We propose a particular population of BCC with preference for BM could be isolated for characterization. This population might be the subset that enter BM at an early time period, and could be responsible for cancer resurgence and resistance to current therapies

Topoisomerase II-Mediated DNA Damage Is Differently Repaired during the Cell Cycle by Non-Homologous End Joining and Homologous Recombination

Topoisomerase II (Top2) is a nuclear enzyme involved in several metabolic processes of DNA. Chemotherapy agents that poison Top2 are known to induce persistent protein-mediated DNA double strand breaks (DSB). In this report, by using knock down experiments, we demonstrated that Top2α was largely responsible for the induction of γH2AX and cytotoxicity by the Top2 poisons idarubicin and etoposide in normal human cells. As DSB resulting from Top2 poisons-mediated damage may be repaired by non-homologous end joining (NHEJ) or homologous recombination (HR), we aimed to analyze both DNA repair pathways. We found that DNA-PKcs was rapidly activated in human cells, as evidenced by autophosphorylation at serine 2056, following Top2-mediated DNA damage. The chemical inhibition of DNA-PKcs by wortmannin and vanillin resulted in an increased accumulation of DNA DSB, as evaluated by the comet assay. This was supported by a hypersensitive phenotype to Top2 poisons of Ku80- and DNA-PKcs- defective Chinese hamster cell lines. We also showed that Rad51 protein levels, Rad51 foci formation and sister chromatid exchanges were increased in human cells following Top2-mediated DNA damage. In support, BRCA2- and Rad51C- defective Chinese hamster cells displayed hypersensitivity to Top2 poisons. The analysis by immunofluorescence of the DNA DSB repair response in synchronized human cell cultures revealed activation of DNA-PKcs throughout the cell cycle and Rad51 foci formation in S and late S/G2 cells. Additionally, we found an increase of DNA-PKcs-mediated residual repair events, but not Rad51 residual foci, into micronucleated and apoptotic cells. Therefore, we conclude that in human cells both NHEJ and HR are required, with cell cycle stage specificity, for the repair of Top2-mediated reversible DNA damage. Moreover, NHEJ-mediated residual repair events are more frequently associated to irreversibly damaged cells

Directed Self-Assembly: Expectations and Achievements

Nanotechnology has been a revolutionary thrust in recent years of development of science and technology for its broad appeal for employing a novel idea for relevant technological applications in particular and for mass-scale production and marketing as common man commodity in general. An interesting aspect of this emergent technology is that it involves scientific research community and relevant industries alike. Top–down and bottom–up approaches are two broad division of production of nanoscale materials in general. However, both the approaches have their own limits as far as large-scale production and cost involved are concerned. Therefore, novel new techniques are desired to be developed to optimize production and cost. Directed self-assembly seems to be a promising technique in this regard; which can work as a bridge between the top–down and bottom–up approaches. This article reviews how directed self-assembly as a technique has grown up and outlines its future prospects