Design of Power-Splitter With Selectable Splitting-Ratio Using Angled and Cascaded MMI-Coupler

A concept of power splitter with selectable splitting-ratios is proposed based on two multimode interference (MMI) sections connected by a phase-shifting region, in which phase-matching conditions can be fulfilled by using a simple angled section or alternatively using matched phase-shifters. The design example of an asymmetrical splitter (10 : 90) is optimized by using the transfer matrix method and three-dimensional full-vectorial beam propagation method. The numerical results reveal that a simple 1.2° angled section can yield a 10 : 90 splitter with an insertion loss of 0.74 dB and a total length of 192 μm. It is also shown that, for the cascaded MMI couplers based splitter, a more compact length of 58 μm with a lower insertion loss of 0.41 dB can be achieved. The fabrication tolerances are also investigated for the proposed asymmetrical power splitter

Dispersion-engineered silicon nitride waveguides for mid-infrared supercontinuum generation covering the wavelength range 0.8-6.5 mu m

We numerically demonstrate the generation of a mid-infrared supercontinuum (SC) through the design of an on-chip complementary metal oxide semiconductor (CMOS) compatible 10-mm-long air-clad rectangular waveguide made using stoichiometric silicon nitride (Si 3 N 4 ) as the core and MgF 2 glass as its lower cladding. The proposed waveguide is optimized for pumping in both the anomalous and all-normal dispersion regimes. A number of waveguide geometries are optimized for pumping at 1.55 μ m with ultrashort pulses of 50-fs duration and a peak power of 5 kW. By initially keeping the thickness constant at 0.8 μ m, four different structures are engineered with varying widths between 3 μ m and 6 μ m. The largest SC spectral evolution covering a region of 0.8 μ m to beyond 6.5 μ m could be realized by a waveguide geometry with a width of 3 μ m. Numerical analysis shows that increasing width beyond 3 μ m by fixing thickness at 0.8 μ m results in a reduction of the SC extension in the long wavelength side. However, the SC spectrum can be enhanced beyond 6.5 μ m by increasing the waveguide thickness beyond 0.9 μ m with the same peak power and pump source. To the best of our knowledge, this is first time report of a broad SC spectral evolution through numerical demonstration in the mid-infrared region by the silicon nitride waveguide. In the case of all-normal dispersion pumping, a flatter SC spectra can be predicted with the same power and pump pulse but with a reduced bandwidth spanning 950–2100 nm

Stacking the Equiangular Spiral

We present an algorithm that adapts the mature Stack and Draw (SaD) methodology for fabricating the exotic Equiangular Spiral Photonic Crystal Fiber. (ES-PCF) The principle of Steiner chains and circle packing is exploited to obtain a non-hexagonal design using a stacking procedure based on Hexagonal Close Packing. The optical properties of the proposed structure are promising for SuperContinuum Generation. This approach could make accessible not only the equiangular spiral but also other quasi-crystal PCF through SaD

Enhanced forward stimulated Brillouin scattering in silicon photonic slot waveguide Bragg grating

We study the forward stimulated Brillouin scattering process in a suspended silicon slot waveguide Bragg grating. Full-vectorial formalism is applied to analyze the interplay of electrostriction and radiation pressure. We show that radiation pressure is the dominant factor in the proposed waveguide. The Brillouin gain strongly depends on the structural parameters and the maximum value in the order of 106 W−1 m−1 is obtained in the slow light regime, which is more than two orders larger than that of the stand-alone strip and slot waveguides

Soft Glass Equiangular Spiral Photonic Crystal Fiber for Supercontinuum Generation

An equiangular spiral photonic crystal fiber (ES-PCF) design in soft glass is presented that has high nonlinearity ( gamma > 5250 W-1 middot km-1 at 1064 nm and gamma > 2150 W-1 middot km-1 at 1550 nm) with a low and flat dispersion (D ~ 0.8 ps/kmmiddotnm and dispersion slope ~ -0.7 ps/km middot nm2 at 1060 nm). The design inspired by nature is characterized by a full-vectorial finite element method. The ES-PCF presented improves over the mode confinement of triangular core designs and dispersion control of conventional hexagonal PCF, combining the advantages of both designs; it can be an excellent candidate for generating supercontinuum pumped at 1.06 mum

Tailoring light-sound interactions in a single mode fiber for the high-power transmission or sensing applications

A full-vectorial numerically efficient Finite Element Method (FEM) based computer code is developed to study complex light-sound interactions in a single mode fiber (SMF). The SBS gain or SBS threshold in a fiber is highly related to the overlap between the optical and acoustic modes. For a typical SMF the acoustic-optic overlap strongly depends on the optical and acoustic mode profiles and it is observed that the acoustic mode is more confined in the core than the optical mode and reported overlap is around 94 % between these fundamental optical and acoustic modes. However, it is shown here that selective co-doping of Aluminum and Germanium in core reduces the acoustic index while keeping the optical index of the same value and thus results in increased acoustic- optic overlap of 99.7%. On the other hand, a design of acoustic anti-guide fiber for high-power transmission systems is also proposed, where the overlap between acoustic and optical modes is reduced. Here, we show that by keeping the optical properties same as a standard SMF and introducing a Boron doped 2ndlayer in the cladding, a very low value of 2.7% overlap is achieved. Boron doping in cladding 2ndlayer results in a high acoustic index and acoustic modes shifts in the cladding from the core, allowing much high power delivery through this SMF