Study of Volcanic Sediments by Microbeam-PIXE Technique

Single mineral grains in a suite of Cretaceous (85–90 Ma) volcanic sedimentary rocks were analyzed using the microbeam-PIXE technique to understand fundamental geological processes responsible for micro-scale variation in elemental composition across mineral zones, twinning, cleavage planes, fractures and grain boundaries. Distributions of major and trace elements show distinct geochemical features indicative of a specific geological setting and a subsequent diagenetic process in these volcanic sediments. Examples of mineral zoning, microstructures of variable chemistry and post-depositional fluid flow are discussed using the data on feldspar group of minerals

STR-927: SHEAR RESISTANCE OF LIGHTWEIGHT SELF-CONSOLIDATING CONCRETE BEAMS

This paper presents the shear behavior of lightweight self-consolidating concrete (LWSCC) beams without shear reinforcement compared to those made with normal weight self-consolidating concrete (SCC). The variables in this experimental and Code based study was shear span to depth ratio, concrete types and longitudinal reinforcement. The performance of LWSCC was compared with normal SCC beams based on load-deformation response, stress-strain development, and shear strength and failure modes. LWSCC beams showed lower post-cracking shear resistance and the shear strength of LWSCC/SCC beams increased with the decrease of shear span to depth ratio. LWSCC beams showed higher number of cracks and wider crack width at failure than their SCC counterparts. American, Canadian and British Codes were conservative in predicting shear strength of LWSCC beams

MAT-731: MECHANICAL & DURABILITY PROPERTIES OF ENGINEERED CEMENTITIOUS COMPOSITES WITH DIFFERENT AGGREGATES

This paper presents the outcome of a study conducted to exhibit the effect of micro-silica sand and mortar sand on fresh, mechanical and durability properties of Engineered Cementitious Composites (ECCs). ECC is a ductile concrete characterized by strain hardening and multiple-cracking behavior under tension and shear. This study used locally available aggregates instead of standard micro-silica sand to produce cost-effective, sustainable and green ECC mixtures to be used for construction applications. ECCs prepared by both types of sands exhibited almost similar behaviour in terms of fresh, mechanical and durability properties which indicated the viability of producing ECC mixtures with mortar sand. In addition, the behaviour of a standard ECC can still be achieved when producing ECCs made of high volume fly ash (up to 70% cement replacement) along with local mortar sand. By employing results of this research, correlations were derived between mechanical and durability properties

AIR TEMPERATURE AND SUNLIGHT INTENSITY OF DIFFERENT GROWING PERIOD AFFECTS THE BIOMASS, LEAF COLOR AND BETACYANIN PIGMENT ACCUMULATIONS IN RED AMARANTH (AMARANTHUS TRICOLOR L.)

The objectives of this study were to determine the effects of daily air temperature and sunlight intensity variations on biomass production, leaf color and betacyanin accumulations in red amaranth (Amaranthus tricolor L.). For this purpose, two improved cultivars; BARI-1 and Altopati were grown in seven different period (from April to October, 2006) under vinyl house condition in the experimental facilities of Gifu University, Japan. The mean daily temperatures fluctuated from 18 (growing month- April) to 29ºC (August), while the mean sunlight intensities varied from 850 (October) to 1257 μmol m-2 S-1 (August). The highest biomass yield and betacyanin accumulation was obtained in the warmer growing period (July and August) at 28 to 29ºC mean air temperatures and 1240 to 1257 μmol m-2 S-1 sunlight intensity. At the warmer growing period red amaranth produced red leaves with high color index, which enhanced the betacyanin accumulations. The biomass yield and betacyanin accumulations were reduced significantly in the growing period/month April and October under low temperature regimes (mean air temperature 18 and 19ºC, respectively). However, growing period’s air temperature contributed more for biomass and betacyanin accumulations in red amaranth than sunlight intensity. Comparing two cultivars the biomass yield of BARI-1 was higher biomass yield than that of Altopati and Altopati highlighted with the higher betacyanin accumulations than that of BARI-1 in all growing period. Quantification of the effects of daily air temperature and sunlight intensity on biomass and betacyanin accumulation is important for growers producing these crops for fresh market and also optimize the best growing period. Therefore the influence of air temperatures and sunlight intensity should be considered while grown red amaranth for maximum yield with bioactive compounds like betacyanin and should be grown in between 28 to 29ºC air temperature and 1240 to 1257 μmol.m-2.S-1. of sunlight intensity

Optimal Power Allocation by Imperfect Hardware Analysis in Untrusted Relaying Networks

CCBY By taking a variety of realistic hardware imperfections into consideration, we propose an optimal power allocation (OPA) strategy to maximize the instantaneous secrecy rate of a cooperative wireless network comprised of a source, a destination and an untrusted amplify-and-forward (AF) relay. We assume that either the source or the destination is equipped with a large-scale multiple antennas (LSMA) system, while the rest are equipped with a single-antenna. To prevent the untrusted relay from intercepting the source message, the destination sends an intended jamming noise to the relay, which is referred to as destination-based cooperative jamming (DBCJ). Given this system model, novel closed-form expressions are presented in the high signal-to-noise ratio (SNR) regime for the ergodic secrecy rate (ESR) and the secrecy outage probability (SOP). We further improve the secrecy performance of the system by optimizing the associated hardware design. The results reveal that by beneficially distributing the tolerable hardware imperfections across the transmission and reception radio-frequency (RF) front ends of each node, the system & #x2019;s secrecy rate may be improved. The engineering insight is that equally sharing the total imperfections at the relay between the transmitter and the receiver provides the best secrecy performance. Numerical results illustrate that the proposed OPA together with the most appropriate hardware design significantly increases the secrecy rate

Performance of Composite Shear Walls Subjected to In-plane Cyclic Loading - A Numerical Parametric Study

An RC shear wall (wall1), a composite shear wall composed of a single external steel plate connected to a concrete panel (wall2), a composite shear wall constructed from two external steel plates connected to an internal concrete panel (wall3) and finally a composite shear wall fabricated with a single internal steel plate embedded within a concrete panel (wall4) are considered in this study and their behavior are assessed and compared under the effect of an in-plane cyclic load. Variation of the three functions include shear load capacity, energy absorption and shear stiffness of the walls are evaluated numerically using the ABAQUS finite element software. The performance of numerical models is validated against to the experimental results. The effects of four parameters consisting of compressive strength of concrete, yield strength of steel plate, height-to-length ratio of the wall and the thickness of the steel plate are investigated on the above-mentioned functions. Obtained results show that the wall4 has the best performance among all four types of shear walls. For instance, the energy absorption capacity of the wall4 is approximately two times greater than that of wall1 and wall2

Reprint of: Internalising symptoms mediate the longitudinal association between childhood inflammation and psychotic-like experiences in adulthood

Psychotic-like experiences (PLEs) are part of a continuum of psychosis. Previous longitudinal studies highlighted a relationship between peripheral inflammation during childhood and onset of PLEs in adulthood. In this study, we tested if this association is mediated by internalising and externalising symptoms experienced during childhood and adolescence. To test this hypothesis, we used data from the Avon Longitudinal Study of Parents and Children (ALSPAC). We investigated a subsample of 4525 individuals from this cohort with data on interleukin 6 (IL-6) and C-reactive protein (CRP) in childhood (age 9 years). We measured PLEs at age 18 years, and we used latent growth curve modelling to estimate longitudinal trajectories of internalising and externalising symptoms from ages 9 to 16 years. The individual predicted values of the intercept (set at baseline, 9 years) and the slope (rate of annual change) were then used in the mediation analysis. There was evidence for full mediation by the intercept of internalising symptoms. Our findings suggest that inflammation during childhood may be relevant for the future onset of PLEs via its association with a high level of internalising symptoms. These findings, although obtained from a non-clinical population, provide an additional step in advancing knowledge on the relationship between inflammation and symptoms of the psychosis continuum