Gamma distribution function to understand anaerobic digestion kinetics: Kinetic constants are not constant

The Gamma model is a novel approach to characterise the complex degradation dynamics taking place during anaerobic digestion. This three parameters model results from combining the first-order kinetic model and the Gamma distribution function. In contrast to conventional models, where the kinetic constant is considered invariant, the Gamma model allows analysing the variability of the kinetic constant using a probability density function. The kinetic constant of mono-digestion and co-digestion batch tests of different wastes were modelled using the Gamma model and two common first-order models: one-step one-fraction model and one-step two-fraction model. The Gamma distribution function approximates three distinct probability density functions, i.e. exponential, log-normal, and delta Dirac. Specifically, (i) cattle paunch and pig manure approximated a log-normal distribution; (ii) cattle manure and microalgae approximated an exponential distribution, and (iii) primary sludge and cellulose approximated a delta Dirac distribution. The Gamma model was able to characterise two distinct waste activated sludge, one approximated to a log-normal distribution and the other to an exponential distribution. The same cellulose was tested with two different inocula; in both tests, the Gamma distribution function approximated a delta Dirac function but with a different kinetic value. The potential and consistency of Gamma model were also evident when analysing pig manure and microalgae co-digestion batch tests since (i) the mean k of the co-digestion tests were within the values of the mono-digestion tests, and (ii) the profile of the density function transitioned from log-normal to exponential distribution as the percentage of microalgae in the mixture increased

Impact of food waste composition on acidogenic co-fermentation with waste activated sludge

The impact of food waste (FW) composition on co-fermentation performance was studied to elucidate if adjusting FW composition can be used to drive the fermentation yield and profile, which is relevant for biorefinery applications. First, the impact of individual FW components (i.e., fruit, vegetables, pasta, rice, meat, fish, and cellulose) was assessed. Subsequently, the effect of mixing a protein-rich component and a carbohydrate-rich component was studied (i.e., fish/fruit and fish/cellulose, and meat/rice and meat/vegetable). All experiments were carried out in mesophilic batch assays using waste activated sludge (WAS) as main substrate, the same mixture ratio (70 % WAS +30 % FW on VS basis), and no pH control. Results showed that each FW component had a distinct effect on VFA yield and profile, with protein-rich components reaching the highest VFA yields; 502 and 442 mgCOD/gVS for WAS/Fish and WAS/Meat, respectively. A positive interaction on VFA yield was observed when mixing a protein-rich and a carbohydrate-rich component. This interaction was not proportional to the co-substrates proportion in the mixtures. On the other hand, the VFA profile was clearly driven by the components in the mixture, including both WAS and FW composition. Overall, these results indicate that predicting the VFA yield of WAS/FW co-fermentation is not just related to FW composition, but FW composition could be used to adjust the VFA profile to a certain extent

The novel genus, ‘Candidatus Phosphoribacter’, previously identified as Tetrasphaera, is the dominant polyphosphate accumulating lineage in EBPR wastewater treatment plants worldwide

The bacterial genus Tetrasphaera encompasses abundant polyphosphate accumulating organisms (PAOs) that are responsible for enhanced biological phosphorus removal (EBPR) in wastewater treatment plants. Recent analyses of genomes from pure cultures revealed that 16S rRNA genes cannot resolve the lineage, and that Tetrasphaera spp. are from several different genera within the Dermatophilaceae. Here, we examine 14 recently recovered high-quality metagenome-assembled genomes from wastewater treatment plants containing full-length 16S rRNA genes identified as Tetrasphaera, 11 of which belong to the uncultured Tetrasphaera clade 3. We find that this clade represents two distinct genera, named here Ca. Phosphoribacter and Ca. Lutibacillus, and reveal that the widely used model organism Tetrasphaera elongata is less relevant for physiological predictions of this uncultured group. Ca. Phosphoribacter incorporates species diversity unresolved at the 16S rRNA gene level, with the two most abundant and often co-occurring species encoding identical V1-V3 16S rRNA gene amplicon sequence variants but different metabolic capabilities, and possibly, niches. Both Ca. P. hodrii and Ca. P. baldrii were visualised using fluorescence in situ hybridisation (FISH), and PAO capabilities were confirmed with FISH-Raman microspectroscopy and phosphate cycling experiments. Ca. Phosphoribacter represents the most abundant former Tetrasphaera lineage and PAO in EPBR systems in Denmark and globally

Semi-aerobic fermentation as a novel pre-treatment to obtain VFA and increase methane yield from primary sludge

There is a growing trend to consider organic wastes as potential sources of renewable energy and value-add products. Fermentation products have emerged as attractive value-add option due to relative easy production and broad application range. However, pre-fermentation and extraction of soluble products may impact down-stream treatment processes, particularly energy recovery by anaerobic digestion. This paper investigates primary sludge pre-fermentation at different temperatures (20, 37, 55, and 70°C), treatment times (12, 24, 48, and 72h), and oxygen availability (semi-aerobic, anaerobic); and its impact on anaerobic digestion. Pre-fermentation at 20 and 37°C succeeded for VFA production with acetate and propionate being major products. Pre-fermentation at 37, 55, and 70°C resulted in higher solubilisation yield but it reduced sludge methane potential by 20%. Under semi-aerobic conditions, pre-fermentation allowed both VFA recovery (43gCODkgVS) and improved methane potential. The latter phenomenon was linked to fungi that colonised the sludge top layer during pre-fermentation

Ultrasonic guided waves propagation analysis under different load tension levels in multi-wire cables

Power line structures made of multi-wire cables are normally subject to adverse environmental conditions that can affect their integrity. The applicability of several techniques has been studied as a possible structural health monitoring solution. Amongst these, Ultrasonic Guided Waves have shown great potential. The complex geometry of the multi-element cable structures complicates the waves’ propagation behaviour and therefore the signal analysis, making the monitoring of the structural integrity of the cables a challenging task. This research presents the enhancements obtained through the use of a specially designed multiple transducer collar for the inspection of the wires. The waves’ excitation capabilities of the system are experimentally evaluated under different axial unload and load tension levels. The influence of these conditions on wave propagation is analysed. The results show the technique’s long range capabilities as well as its limitations and will thereby contribute towards the design of a future structural health monitoring system.This work is part of MOSAIC project, funded by the UK government under the Innovate UK Programme. MOSAIC is a collaboration between the following organisations: Plant Integrity Ltd (Pi), Brunel Innovation Centre (BIC) Brunel University London, and Applied Inspection® (AI)

Low Global Diversity of Candidatus Microthrix, a Troublesome Filamentous Organism in Full-Scale WWTPs

Candidatus Microthrix is one of the most common bulking filamentous microorganisms found in activated sludge wastewater treatment plants (WWTPs) across the globe. One species, Ca. M. parvicella, is frequently observed, but global genus diversity, as well as important aspects of its ecology and physiology, are still unknown. Here, we use the MiDAS ecosystem-specific 16S rRNA gene database in combination with amplicon sequencing of Danish and global WWTPs to investigate Ca. Microthrix spp. diversity, distribution, and factors affecting their global presence. Only two species were abundant across the world confirming low diversity of the genus: the dominant Ca. M. parvicella and an unknown species typically present along with Ca. M. parvicella, although usually in lower abundances. Both species were mostly found in Europe at low-to-moderate temperatures and their growth was favored in municipal WWTPs with advanced process designs. As no isolate is available for the novel species, we propose the name “Candidatus Microthrix subdominans.” Ten high-quality metagenome-assembled genomes recovered from Danish WWTPs, including 6 representing the novel Ca. M. subdominans, demonstrated high genetic similarity between the two species with a likely preference for lipids, a putative capability to reduce nitrate and nitrite, and the potential to store lipids and poly-P. Ca. M. subdominans had a potentially more versatile metabolism including additional sugar transporters, higher oxygen tolerance, and the potential to use carbon monoxide as energy source. Newly designed fluorescence in situ hybridization probes revealed similar filamentous morphology for both species. Raman microspectroscopy was used to quantify the in situ levels of intracellular poly-P. Despite the observed similarities in their physiology (both by genomes and in situ), the two species showed different seasonal dynamics in Danish WWTPs through a 13-years survey, possibly indicating occupation of slightly different niches. The genomic information provides the basis for future research into in situ gene expression and regulation, while the new FISH probes provide a useful tool for further characterization in situ. This study is an important step toward understanding the ecology of Ca. Microthrix in WWTPs, which may eventually lead to optimization of control strategies for its growth in this ecosystem

Potential of anaerobic co-fermentation in wastewater treatments plants: A review

Fermentation (not anaerobic digestion) is an emerging biotechnology to transform waste into easily assimilable organic compounds such as volatile fatty acids, lactic acid and alcohols. Co-fermentation, the simultaneous fermentation of two or more waste, is an opportunity for wastewater treatment plants (WWTPs) to increase the yields of sludge mono-fermentation. Most publications have studied waste-activated sludge co-fermentation with food waste or agri-industrial waste. Mixing ratio, pH and temperature are the most studied variables. The highest fermentation yields have been generally achieved in mixtures dominated by the most biodegradable substrate at circumneutral pH and mesophilic conditions. Nonetheless, most experiments have been performed in batch assays which results are driven by the capabilities of the starting microbial community and do not allow evaluating the microbial acclimation that occurs under continuous conditions. Temperature, pH, hydraulic retention time and organic load are variables that can be controlled to optimise the performance of continuous co-fermenters (i.e., favour waste hydrolysis and fermentation and limit the proliferation of methanogens). This review also discusses the integration of co-fermentation with other biotechnologies in WWTPs. Overall, this review presents a comprehensive and critical review of the achievements on co-fermentation research and lays the foundation for future researc

Approach to design space from retrospective quality data

Context: Nowadays, the entire manufacturing process is based on the current GMPs, which emphasize the reproducibility of the process, and companies have a lot of recorded data about their processes. Objective: The establishment of the design space (DS) from retrospective data for a wet compression process. Materials and methods: A design of experiments (DoE) with historical data from 4 years of industrial production has been carried out using the experimental factors as the results of the previous risk analysis and eight key parameters (quality specifications) that encompassed process and quality control data. Results: Software Statgraphics 5.0 was applied, and data were processed to obtain eight DS as well as their safe and working ranges. Discussion and conclusion: Experience shows that it is possible to determine DS retrospectively, being the greatest difficulty in handling and processing of high amounts of data; however, the practicality of this study is very interesting as it let have the DS with minimal investment in experiments since actual production batch data are processed statistically

Nocturnal Hypoxemia and CT Determined Pulmonary Artery Enlargement in Smokers

Background: Pulmonary artery enlargement (PAE) detected using chest computed tomography (CT) is associated with poor outcomes in chronic obstructive pulmonary disease (COPD). It is unknown whether nocturnal hypoxemia occurring in smokers, with or without COPD, obstructive sleep apnoea (OSA) or their overlap, may be associated with PAE assessed by chest CT. Methods: We analysed data from two prospective cohort studies that enrolled 284 smokers in lung cancer screening programs and completing baseline home sleep studies and chest CT scans. Main pulmonary artery diameter (PAD) and the ratio of the PAD to that of the aorta (PA:Ao ratio) were measured. PAE was defined as a PAD >= 29 mm in men and >= 27 mm in women or as a PA:Ao ratio > 0.9. We evaluated the association of PAE with baseline characteristics using multivariate logistic models. Results: PAE prevalence was 27% as defined by PAD measurements and 11.6% by the PA:Ao ratio. A body mass index >= 30 kg/m(2) (OR 2.01; 95%CI 1.06-3.78), lower % predicted of forced expiratory volume in one second (FEV1) (OR 1.03; 95%CI 1.02-1.05) and higher % of sleep time with O-2 saturation < 90% (T90) (OR 1.02; 95%CI 1.00-1.03), were associated with PAE as determined by PAD. However, only T90 remained significantly associated with PAE as defined by the PA:Ao ratio (OR 1.02; 95%CI 1.01-1.03). In the subset group without OSA, only T90 remains associated with PAE, whether defined by PAD measurement (OR 1.02; 95%CI 1.01-1.03) or PA:Ao ratio (OR 1.04; 95%CI 1.01-1.07). Conclusions: In smokers with or without COPD, nocturnal hypoxemia was associated with PAE independently of OSA coexistence