Analysis of relative prosperity in Romania and Slovenia using the being-loving-having model

The study aimed to verify Allardt's prosperity model in the field of economic prosperity based on the notions of being, loving and having and to explore the existence of possible correlation among sets of all three variables. Canonical correlation analysis to predict relative prosperity was performed for selected 110 nations with the focus on Romania and Slovenia. The study results for Romania for 2011 indicate low approval of the government, low confidence in the judicial system as well as in financial institutions, in addition to concerns about health prospects and lack of confidence in the transparency of elections for the loving construct. In addition, the being construct is also negative in Romania suggesting overall dissatisfaction with the economic status and development, indicating strong dissatisfaction with governmental efforts to address poverty and efforts regarding sanitation, concerns about environment, existing standard of living and life expectancy, suggesting a weak health system. The study further suggests for Slovenia for 2011 negative expectations for the loving construct and below average expectations for the being construct. The approval of the government and confidence in the judicial system and financial institutions in Slovenia is also low, the only positive expectation is the confidence in electoral system, but Slovenians are also worried about their health prospects. In addition, the being construct for Slovenia is also slightly below average, indicating dissatisfaction with economic development and below average satisfaction with water quality and environment, and life expectancy suggesting health system inefficiency. The longitudinal study for the time period from 2011 till 2016 suggests moderate improvements for Romania in eight areas of relative prosperity, especially for the natural environment, governance and education, and for Slovenia practically unchanged situation. The study further suggests that both nations still face numerous challenges but due to implementation of certain structural reforms till 2016, albeit limited, some additional improvements regarding the economic prosperity of their citizens could be expected in the near future

Social media and community policing implementation in South Eastern Europe : a question of trust

At the present time, social media are increasingly used within community policing as a tool of fostering communication, and improving trust between the police and communities. Community policing programmes implemented in post-communist countries in South Eastern Europe, as well as processes of building police legitimacy in general, have been facing challenges related to insufficient public confidence in the law enforcement, and a necessity to re-define police roles. This paper uses the results of empirical research to argue that the still ongoing processes of bridging gaps in police-community communication can be supported by the use of social media. Presented argumentation is based on the analysis of selected quantitative studies on police legitimacy, and chosen findings of qualitative field research which was conducted in 2016 in Bosnia and Herzegovina as a part of the project Community-Based Policing and Post-Conflict Police Reform (ICT4COP). An implication of presented study should be a more in-depth analysis of key factors influencing both the formation of police legitimacy, and ways in which the use of social media in police–community relations, especially, in post-communist societies, should be designed to serve the purpose of building trust in the police

Reduction of transient regime in fast preionized high-power pulsed-magnetron discharge

A high-power pulsed-magnetron discharge (several \un{kW/cm^2}) is described. It operates at pulse duration of the order of few μs, significantly shorter than in usual similar devices. The breakdown delay was reduced by using a low-current DC preionization. The study was performed for Cu target in Ar and He buffer gases by optical emission spectroscopy and electrical measurements. Saturation magnetron current is reached in a few μs which permits to shorten the pulse duration avoiding arc formation. Unusual high current density up to 10\un{A/{cm^2}} induces very fast transition toward the stable self-sputtering regime. High plasma density favours high ion flux to the substrate. Preliminary result on Cu deposit in trenches is reported

Review of the Hard-Facing Technology Application for Reparation of the Given Parts in Various Branches of Industry

This paper deals with the problem of defining the optimal procedure for reparation of the machine parts of large dimensions and complex shapes. The procedure consists of establishing the causes of the part's damages, definition of the reparation technology, with selection of its parameters and ways of execution. The reparation is done by hard-facing, with heat treatment that consists of preheating, additional heating and the post hard-facing tempering. The process parameters' selection includes choosing the right filler metal(s), ways and order of depositing the hard-faced layers, ways of reaching and maintaining the preheating temperatures, checking of the base metal's chemical composition and mechanical properties and deciding on the post-process heat and mechanical processing of the executed hard-facing. The executed reparation of the forging hammer's mallet, presented in details, serves as an example how the reparation can successfully serve as a substitute for procuring the new part and thus producing the savings both directly in lower costs and indirectly in shortening the down-time of the damaged part operation

Documenting metrological traceability as intended by ISO 15189:2012 : a consensus statement about the practice of the implementation and auditing of this norm element

ISO15189:2012 requires medical laboratories to document metrological traceability of their results. While the ISO17511:2003 standard on metrological traceability in laboratory medicine requires the use of the highest available level in the traceability chain, it recognizes that for many measurands there is no reference above the manufacturer\u27s selected measurement procedure and the manufacturer\u27s working calibrator. Some immunoassays, although they intend to measure the same quantity and may even refer to the same reference material, unfortunately produce different results because of differences in analytical selectivity as manufacturers select different epitopes and antibodies for the same analyte. In other cases, the cause is the use of reference materials, which are not commutable. The uncertainty associated with the result is another important aspect in metrological traceability implementation. As the measurement uncertainty on the clinical samples is influenced by the uncertainty of all steps higher in the traceability chain, laboratories should be provided with adequate and appropriate information on the uncertainty of the value assignment to the commercial calibrators that they use. Although the between-lot variation in value assignment will manifest itself as part of the long-term imprecision as estimated by the end-user, information on worst-case to be expected lot-lot variation has to be communicated to the end-user by the IVD provider. When laboratories use ancillary equipment that potentially could have a critical contribution to the reported results, such equipment needs verification of its proper calibration and criticality to the result uncertainty could be assessed by an approach based on risk analysis, which is a key element of ISO15189:2012 anyway. This paper discusses how the requirement for metrological traceability as stated in ISO15189 should be met by the medical laboratory and how this should be assessed by accreditation bodies