259 research outputs found
Anisotropic spin-density distribution and magnetic anisotropy of strained LaSrMnO thin films: Angle-dependent x-ray magnetic circular dichroism
Magnetic anisotropies of ferromagnetic thin films are induced by epitaxial
strain from the substrate via strain-induced anisotropy in the orbital magnetic
moment and that in the spatial distribution of spin-polarized electrons.
However, the preferential orbital occupation in ferromagnetic metallic
LaSrMnO (LSMO) thin films studied by x-ray linear dichroism
(XLD) has always been found out-of-plane for both tensile and compressive
epitaxial strain and hence irrespective of the magnetic anisotropy. In order to
resolve this mystery, we directly probed the preferential orbital occupation of
spin-polarized electrons in LSMO thin films under strain by angle-dependent
x-ray magnetic circular dichroism (XMCD). Anisotropy of the spin-density
distribution was found to be in-plane for the tensile strain and out-of-plane
for the compressive strain, consistent with the observed magnetic anisotropy.
The ubiquitous out-of-plane preferential orbital occupation seen by XLD is
attributed to the occupation of both spin-up and spin-down out-of-plane
orbitals in the surface magnetic dead layer.Comment: 20 pages, 4 figure
Guidelines for the Creation of a Program for Type III Environmental Declarations in the United States
Abstract
There currently exists a demand in the United States for information about the environmental impacts
of consumer products, but there is no consistent system for providing this information. This project proposes guidelines for the creation of a Type III environmental declaration program which will provide objective information about the environmental impacts of products based on life cycle assessment (LCA)methods.
To more easily convey complicated information to consumers, the use of an original data presentation format, the “radar area graph”, was selected based on the results of a consumer survey. Because printed labels do not allow convenient product comparisons, a model internet website was created to demonstrate
the potential of interactive product data. One original recommendation is an interactive personal database that allows consumers to track the impacts of their activities, thus making data more interesting and useful to consumers.
Because evaluating products using LCA can be time consuming, we created a method of efficiently and consistently calculating environmental impacts. It includes guidelines for defining system boundaries
and functional units, and for characterizing environmental impacts. Ten environmental impact category indicators were selected, and original methods were developed for characterizing land use and water
depletion using spatial data. A spreadsheet calculator was created for determining human and ecological toxicity indicators. Finally, original software was developed to demonstrate the proposal for a common
database of process and material parameters.
To guide an administrator during the creation of a new Type III program, recommendations are provided for organizational structure, product registration procedures, and budget management for continued operation and growth.Master of ScienceNatural Resources and EnvironmentUniversity of Michigan, School of Natural Resources and Environmenthttp://deepblue.lib.umich.edu/bitstream/2027.42/35333/2/Guidelines for Type III Declarations - Full Report - by Bolo.pd
Fluorescence Imaging and Spectroscopy of Biomaterials in Air and Liquid by Scanning Near-Field Optical/Atomic Force Microscopy
We have developed scanning near-field optical/atomic force microscopy (SNOM/AFM). The SNOM/AFM uses a bent optical fiber simultaneously as a dynamic force AFM cantilever and a SNOM probe. Resonant frequency of the optical fiber cantilever is 15-40 kHz. Optical resolution of the SNOM/AFM images shows less than 50 nm. The SNOM/ AFM system contains photon counting system and polychrometer/intensified coupled charge devise (ICCD) system to observe fluorescence image and spectrograph of micro areas, respectively. Cultured cells were stained with fluorescein isothiocyanate (FITC)-labeled anti-keratin antibody or FITC-labeled phalloidin after treatment with Triton X-100. Fluorescence and topographic images were obtained in air and water. The fluorescence images showed clear images of keratin and actin filaments. The SNOM/AFM is perfect to observe biomaterials in liquid with a liquid chamber while the topographic Images showed subcellular structures which correspond to keratin and actin filaments
Photoelectric Emission from Interstellar Dust: Grain Charging and Gas Heating
We model the photoelectric emission from and charging of interstellar dust
and obtain photoelectric gas heating efficiencies as a function of grain size
and the relevant ambient conditions. Using realistic grain size distributions,
we evaluate the net gas heating rate for various interstellar environments, and
find less heating for dense regions characterized by R_V=5.5 than for diffuse
regions with R_V=3.1. We provide fitting functions which reproduce our
numerical results for photoelectric heating and recombination cooling for a
wide range of interstellar conditions. In a separate paper we will examine the
implications of these results for the thermal structure of the interstellar
medium. Finally, we investigate the potential importance of photoelectric
heating in H II regions, including the warm ionized medium. We find that
photoelectric heating could be comparable to or exceed heating due to
photoionization of H for high ratios of the radiation intensity to the gas
density. We also find that photoelectric heating by dust can account for the
observed variation of temperature with distance from the galactic midplane in
the warm ionized medium.Comment: 50 pages, including 18 figures; corrected title and abstract field
High purity semi-insulating 4H-SiC epitaxial layers by Defect-Competition Epitaxy
Thick, high-purity semi-insulating (SI)homoepitaxial layers on Si-face 4H-SiC
weregrownsystematically, with resistivity \geq 109{\Omega}-cmby maintaining
high C/Si ratios 1.3-15 during growth.Comparison of secondary ion mass spectra
betweenlow-dopedepilayers grown at C/Si ratio<1.3andSI-epilayers grown at C/Si
ratio>1.3 showed little difference in residual impurity concentrations. A
reconciliation of impurity concentration with measured resistivity indicated a
compensating trap concentration of ~1015cm-3present only in the SI-epilayers.
High- resolution photo induced transient spectroscopy (HRPITS) identified
themas Si-vacancy related deep centers, with no detectable EH6/7 and
Z1/2levels. Recombination lifetimes ~5ns suggest application in fast-switching
power devices.Comment: Submitted to Applied Physics Letter
Study of polytopic membrane protein topological organization as a function of membrane lipid composition.
A protocol is described using lipid mutants and thiol-specific chemical reagents to study lipid-dependent and host-specific membrane protein topogenesis by the substituted-cysteine accessibility method as applied to transmembrane domains (SCAM). SCAM is adapted to follow changes in membrane protein topology as a function of changes in membrane lipid composition. The strategy described can be adapted to any membrane system
Gallbladder adenocarcinoma with human chorionic gonadotropin: a case report and review of literature
<p>Abstract</p> <p>Background</p> <p>The case of adenocarcinoma with human chorionic gonadtropin (HCG), primary in the male gallbladder, is extremely rare. A Medline search has shown only a few similar cases reported.</p> <p>Methods</p> <p>We herein describe a case of primary gallbladder adenocarcinoma associated by ectopic HCG positive tumor cells in a 79-year-old male.</p> <p>Results</p> <p>Pathological examination showed a mixture of moderately and poorly differentiated adenocarcinoma with ectopic HCG and placental alkaline phosphatase (PlAP) in tumor cells, though the increase of serum or urinary HCG secretion was not confirmed. The literatures were also reviewed.</p> <p>Conclusions</p> <p>A case of gallbladder cancer with ectopic HCG production is quite rare in the literature, though many similar cases in other site, especially in GI tract, are reported. Embryological consideration suggests the increased frequency of similar cases more than being thought now.</p
The new cardioprotector Monohydroxyethylrutoside protects against doxorubicin-induced inflammatory effects in vitro
The new cardioprotector Monohydroxyethylrutoside protects against doxorubicin-induced inflammatory effects in vitro. Abou El Hassan MA, Verheul HM, Jorna AS, Schalkwijk C, van Bezu J, van der Vijgh WJ, Bast A. Department of Medical Oncology, Free University Medical Center, PO Box 7057, 1007 MB Amsterdam, The Netherlands. [email protected] Besides its cardiotoxic effect, doxorubicin also elicits inflammatory effects in vivo. 7-Monohydroxyethylrutoside (monoHER) has recently been used as a protector against doxorubicin-induced cardiotoxicity in vivo. It is not known yet whether monoHER can also protect against doxorubicin-induced inflammatory effects. The aim of the present study was (1) to illustrate the inflammatory effects of doxorubicin in vitro and (2) to evaluate a possibly protective effect of monoHER. In order to demonstrate the inflammatory effects of doxorubicin and the possible protection of monoHER, proliferating human umbilical cord vascular endothelial cells (HUVECs) were incubated with different concentrations of doxorubicin ranging from 12.5 to 600 nM with(out) 200 micro M monoHER. Resting (confluent) HUVECs were incubated with (0.5-25 micro M) doxorubicin with(out) monoHER (0.2-1.2 mM) and the viability of endothelial cells and their propensity to adhere to neutrophils were measured 24 h after treatment. The localisation of adhered neutrophils was determined with immunofluorescence microscopy. To further characterise the mechanism of doxorubicin-induced neutrophil adhesion, the expression of the HUVECs surface adhesion molecules was determined after doxorubicin treatment. Doxorubicin decreased the viability and proliferation capacity of HUVECs in a concentration-dependent manner. The proliferating HUVECs were much more sensitive to doxorubicin (IC(50)=60.0+/-20.8 nM) than resting cells (LC(50)=4.0+/-0.3 micro M). Doxorubicin also increased the adhesion of neutrophils reaching a plateau value at a doxorubicin concentration of > or =0.4 micro M (P=0.0113). The induced neutrophil adhesion was accompanied by overexpression of VCAM and E-selectin but not ICAM. Although monoHER did not reverse the effect of doxorubicin on the proliferation of endothelial cells, it significantly protected resting HUVECs against the cytotoxic effect of doxorubicin (< or =25 micro M, P<0.0015). In addition, monoHER completely protected against the stimulatory effect of doxorubicin on neutrophil adhesion, and inhibited the doxorubin-induced expression of VCAM and E-selectin on the surface of treated HUVECs. This study illustrates that monoHER, which protects against doxorubicin's cardiotoxic effect, can also protect against doxorubicin-induced inflammatory effects. These data prompt further investigation about the possible link between doxorubicin-induced inflammatory effects and its cardiotoxicity in viv
Switching Transport through Nanopores with pH-Responsive Polymer Brushes for Controlled Ion Permeability
Several nanoporous platforms were functionalized with pH-responsive poly(methacrylic acid) (PMAA) brushes using surface-initiated atom transfer radical polymerization (SI-ATRP). The growth of the PMAA brush and its pH-responsive behavior from the nanoporous platforms were confirmed by scanning electron microscopy (SEM), Fourier transform infrared (FTIR) spectroscopy, and atomic force microscopy (AFM). The swelling behavior of the pH-responsive PMAA brushes grafted only from the nanopore walls was investigated by AFM in aqueous liquid environment with pH values of 4 and 8. AFM images displayed open nanopores at pH 4 and closed ones at pH 8, which rationalizes their use as gating platforms. Ion conductivity across the nanopores was investigated with current–voltage measurements at various pH values. Enhanced higher resistance across the nanopores was observed in a neutral polymer brush state (lower pH values) and lower resistance when the brush was charged (higher pH values). By adding a fluorescent dye in an environment of pH 4 or pH 8 at one side of the PMAA-brush functionalized nanopore array chips, diffusion across the nanopores was followed. These experiments displayed faster diffusion rates of the fluorescent molecules at pH 4 (PMAA neutral state, open pores) and slower diffusion at pH 8 (PMAA charged state, closed pores) showing the potential of this technology toward nanoscale valve applications
Changes in Plasma Membrane Surface Potential of PC12 Cells as Measured by Kelvin Probe Force Microscopy
The plasma membrane of a cell not only works as a physical barrier but also mediates the signal relay between the extracellular milieu and the cell interior. Various stimulants may cause the redistribution of molecules, like lipids, proteins, and polysaccharides, on the plasma membrane and change the surface potential (Φs). In this study, the Φss of PC12 cell plasma membranes were measured by atomic force microscopy in Kelvin probe mode (KPFM). The skewness values of the Φss distribution histogram were found to be mostly negative, and the incorporation of negatively charged phosphatidylserine shifted the average skewness values to positive. After being treated with H2O2, dopamine, or Zn2+, phosphatidylserine was found to be translocated to the membrane outer leaflet and the averaged skewness values were changed to positive values. These results demonstrated that KPFM can be used to monitor cell physiology status in response to various stimulants with high spatial resolution
- …