134 research outputs found

    Modeling quasi-dark states with Temporal Coupled-Mode Theory

    Get PDF
    Coupled resonators are commonly used to achieve tailored spectral responses and allow novel functionalities in a broad range of applications, from optical modulation and filtering in integrated photonic circuits to the study of nonlinear dynamics in arrays of resonators. The Temporal Coupled-Mode Theory (TCMT) provides a simple and general tool that is widely used to model these devices and has proved to yield very good results in many different systems of low-loss, weakly coupled resonators. Relying on TCMT to model coupled resonators might however be misleading in some circumstances due to the lumped-element nature of the model. In this article, we report an important limitation of TCMT related to the prediction of dark states. Studying a coupled system composed of three microring resonators, we demonstrate that TCMT predicts the existence of a dark state that is in disagreement with experimental observations and with the more general results obtained with the Transfer Matrix Method (TMM) and the Finite-Difference Time-Domain (FDTD) simulations. We identify the limitation in the TCMT model to be related to the mechanism of excitation/decay of the supermodes and we propose a correction that effectively reconciles the model with expected results. A comparison with TMM and FDTD allows to verify both steady-state and transient solutions of the modified-TCMT model. The proposed correction is derived from general considerations, energy conservation and the non-resonant power circulating in the system, therefore it provides good insight on how the TCMT model should be modified to eventually account for the same limitation in a different coupled-resonator design. Moreover, our discussion based on coupled microring resonators can be useful for other electromagnetic resonant systems due to the generality and far-reach of the TCMT formalism.Comment: 7 pages, 4 figure

    Spectral Engineering with Coupled Microcavities: Active Control of Resonant Mode-Splitting

    Full text link
    Optical mode-splitting is an efficient tool to shape and fine-tune the spectral response of resonant nanophotonic devices. The active control of mode-splitting, however, is either small or accompanied by undesired resonance shifts, often much larger than the resonance-splitting. We report a control mechanism that enables reconfigurable and widely tunable mode-splitting while efficiently mitigating undesired resonance shifts. This is achieved by actively controlling the excitation of counter-traveling modes in coupled resonators. The transition from a large splitting (80 GHz) to a single-notch resonance is demonstrated using low power microheaters (35 mW). We show that the spurious resonance-shift in our device is only limited by thermal crosstalk and resonance-shift-free splitting control may be achieved.Comment: 4 pages, 3 figure

    Hybrid multimode resonators based on grating-assisted counter-directional couplers

    Get PDF
    FUNDAÇÃO DE AMPARO À PESQUISA DO ESTADO DE SÃO PAULO - FAPESPResearch thrusts in silicon photonics are developing control operations using higher order waveguide modes for next generation high-bandwidth communication systems. In this context, devices allowing optical processing of multiple waveguide modes can reduce architecture complexity and enable flexible on-chip networks. We propose and demonstrate a hybrid resonator dually resonant at the 1st and 2nd order modes of a silicon waveguide. We observe 8 dB extinction ratio and modal conversion range of 20 nm for the 1st order quasi-TE mode input.25141648416490FUNDAÇÃO DE AMPARO À PESQUISA DO ESTADO DE SÃO PAULO - FAPESPFUNDAÇÃO DE AMPARO À PESQUISA DO ESTADO DE SÃO PAULO - FAPESP2015/20525-6Office of Naval Research (ONR) Multi-Disciplinary Research Initiative; National Science Foundation (NSF) (NNCI-SDNI, ERC CIAN); Defense Advanced Research Projects Agency (DARPA); Army Research Office (ARO); Cymer Corporation. M. Souza acknowledges FAPESP (grant 2015/20525-6)

    Loss compensation in microring-based Si photonics devices via Er3+doped claddings

    Get PDF
    FAPESP - FUNDAÇÃO DE AMPARO À PESQUISA DO ESTADO DE SÃO PAULOCNPQ - CONSELHO NACIONAL DE DESENVOLVIMENTO CIENTÍFICO E TECNOLÓGICOWe propose and demonstrate a method to compensate insertion losses in Si photonics devices based on ring resonators fabricated in SOI foundries, with no additional chip area used. It consists in the employment of Er:Al2O3 as the upper cladding layer on standard Si/SiO2 rings, requiring only one simple post-processing step. The method is modeled in detail, and simulation results for single-ring configurations and photonic molecules are discussed, where the potential for loss reduction is predicted for different design choices based on the quality factor. We experimentally verify the viability of the method, obtaining an output power increase of 1 dB when a single-ring resonator is pumped. This value is increased when the method is applied to devices based on photonic molecules, where a value of 2.6 dB has been measured. This is equivalent to a loss reduction potential higher than 3 dB for a photonic molecule designed to achieve a quality factor of 50000.104113FAPESP - FUNDAÇÃO DE AMPARO À PESQUISA DO ESTADO DE SÃO PAULOCNPQ - CONSELHO NACIONAL DE DESENVOLVIMENTO CIENTÍFICO E TECNOLÓGICOFAPESP - FUNDAÇÃO DE AMPARO À PESQUISA DO ESTADO DE SÃO PAULOCNPQ - CONSELHO NACIONAL DE DESENVOLVIMENTO CIENTÍFICO E TECNOLÓGICO08/57857-22014/04748-2574017/2008-

    Comparative study between wet and dry etching of silicon for microchannels fabrication

    Get PDF
    FAPESP - FUNDAÇÃO DE AMPARO À PESQUISA DO ESTADO DE SÃO PAULOIn this work we present a comparative study of two processes for the fabrication of an array of microchannels for microfluidics applications, based on integrated-circuit technology process steps, such as lithography and dry etching. Two different methods were investigated in order to study the resulting microstructures: wet and dry deep etching of silicon substrate. The typical etching depth necessary to the target application is 50 mu m.1093015FAPESP - FUNDAÇÃO DE AMPARO À PESQUISA DO ESTADO DE SÃO PAULOFAPESP - FUNDAÇÃO DE AMPARO À PESQUISA DO ESTADO DE SÃO PAULO2016/09509-112. Conference on Advanced Fabrication Technologies for Micro/Nano Optics and Photonics3 a 5 de Fevereiro de 2019San Francisco, CA, Estados UnidosSPIE; Nanoscribe Gmb
    • 

    corecore