21,106 research outputs found
Heat transfer in the tip region of a rotor blade simulator
The objective of this study of heat transfer in the tip region of a rotor blade simulator is to acquire, through experimental and computational approaches, improved understanding of the nature of the flow and convective heat transfer in the blade tip region. Such information should enable designers to make more accurate predictions of performance and durability, and should support the future development of improved blade tip cooling schemes
Heat transfer in the tip region of a rotor blade simulator
In gas turbines, the blades of axial turbine stages rotate in close proximity to a stationary peripheral wall. Differential expansion of the turbine wheel, blades, and the shroud causes variations in the size of the clearance gap between blade tip and stationary shroud. The necessity to tolerate this differential thermal expansion dictates that the clearance gap cannot be eliminated altogether, despite accurate engine machining. Pressure differences between the pressure and suction sides of a blade drives a flow through the clearance gap. This flow, the tip leakage flow, is detrimental to engine performance. The primary detrimental effect of tip leakage flow is the reduction of turbine stage efficiency, and a second is the convective heat transfer associated with the flow. The surface area at the blade tip in contact with the hot working gas represents an additional thermal loading on the blade which, together with heat transfer to the suction and pressure side surface area, must be removed by the blade internal cooling flows. Experimental results concerned with the local heat transfer characteristics on all surfaces of shrouded, rectangular cavities are reported. A brief discussion of the mass transfer system used is given
Thermodynamic Phase Diagram of the Quantum Hall Skyrmion System
We numerically study the interacting quantum Hall skyrmion system based on
the Chern-Simons action. By noticing that the action is invariant under global
spin rotations in the spin space with respect to the magnetic field direction,
we obtain the low-energy effective action for a many skyrmion system.
Performing extensive molecular dynamics simulations, we establish the
thermodynamic phase diagram for a many skyrmion system.Comment: 4 pages, RevTex, 2 postscript figure
Ergodic property of Markovian semigroups on standard forms of von Neumann algebras
We give sufficient conditions for ergodicity of the Markovian semigroups
associated to Dirichlet forms on standard forms of von Neumann algebras
constructed by the method proposed in Refs. [Par1,Par2]. We apply our result to
show that the diffusion type Markovian semigroups for quantum spin systems are
ergodic in the region of high temperatures where the uniqueness of the
KMS-state holds.Comment: 25 page
Coexistence of bulk and surface states probed by Shubnikov-de Haas oscillations in BiSe with high charge-carrier density
Topological insulators are ideally represented as having an insulating bulk
with topologically protected, spin-textured surface states. However, it is
increasingly becoming clear that these surface transport channels can be
accompanied by a finite conducting bulk, as well as additional topologically
trivial surface states. To investigate these parallel conduction transport
channels, we studied Shubnikov-de Haas oscillations in BiSe thin films,
in high magnetic fields up to 30 T so as to access channels with a lower
mobility. We identify a clear Zeeman-split bulk contribution to the
oscillations from a comparison between the charge-carrier densities extracted
from the magnetoresistance and the oscillations. Furthermore, our analyses
indicate the presence of a two-dimensional state and signatures of additional
states the origin of which cannot be conclusively determined. Our findings
underpin the necessity of theoretical studies on the origin of and the
interplay between these parallel conduction channels for a careful analysis of
the material's performance.Comment: Manuscript including supplemental materia
Xwnt-5A: a maternal Wnt that affects morphogenetic movements after overexpression in embryos of Xenopus laevis
To contribute to an understanding of the roles and mechanisms of action of Wnts in early vertebrate development, we have characterized the normal expression of Xenopus laevis Wnt-5A, and investigated the consequences of misexpression of this putative signalling factor. Xwnt-5A transcripts are expressed throughout development, and are enriched in both the anterior and posterior regions of embryos at late stages of development, where they are found primarily in ectoderm, with lower levels of expression in mesoderm. Overexpression of Xwnt-5A in Xenopus embryos leads to complex malformations distinct from those achieved by ectopic expression of Xwnts ā1, ā3A, or ā8. This phenotype is unlikely to result from Xwnt-5A acting as an inducing agent, as overexpression of Xwnt-5A does not rescue dorsal structures in UV-irradiated embryos, does not induce mesoderm in blastula caps, and Xwnt-5A does not alter the endogenous patterns of expression of goosecoid, Xbra, or Xwnt-8. To pursue whether Xwnt-5A has the capacity to affect morphogenetic movements, we investigated whether overexpression of Xwnt-5A alters the normal elongation of blastula cap explants induced by activin. Intriguingly, Xwnt-5A blocks the elongation of blastula caps in response to activin, without blocking the differentiation of either dorsal or ventral mesoderm within these explants. The data are consistent with Xwnt-5A having the potential activity of modifying the morphogenetic movements of tissues
Reentrant Melting of Soliton Lattice Phase in Bilayer Quantum Hall System
At large parallel magnetic field , the ground state of bilayer
quantum Hall system forms uniform soliton lattice phase. The soliton lattice
will melt due to the proliferation of unbound dislocations at certain finite
temperature leading to the Kosterlitz-Thouless (KT) melting. We calculate the
KT phase boundary by numerically solving the newly developed set of Bethe
ansatz equations, which fully take into account the thermal fluctuations of
soliton walls. We predict that within certain ranges of , the
soliton lattice will melt at . Interestingly enough, as temperature
decreases, it melts at certain temperature lower than exhibiting
the reentrant behaviour of the soliton liquid phase.Comment: 11 pages, 2 figure
Epitaxial growth of (111)-oriented LaAlO/LaNiO ultra-thin superlattices
The epitaxial stabilization of a single layer or superlattice structures
composed of complex oxide materials on polar (111) surfaces is severely
burdened by reconstructions at the interface, that commonly arise to neutralize
the polarity. We report on the synthesis of high quality LaNiO/mLaAlO
pseudo cubic (111) superlattices on polar (111)-oriented LaAlO, the
proposed complex oxide candidate for a topological insulating behavior.
Comprehensive X-Ray diffraction measurements, RHEED, and element specific
resonant X-ray absorption spectroscopy affirm their high structural and
chemical quality. The study offers an opportunity to fabricate interesting
interface and topology controlled (111) oriented superlattices based on
ortho-nickelates
- ā¦