A human operator simulator model of the NASA Terminal Configured Vehicle (TCV)

A generic operator model called HOS was used to simulate the behavior and performance of a pilot flying a transport airplane during instrument approach and landing operations in order to demonstrate the applicability of the model to problems associated with interfacing a crew with a flight system. The model which was installed and operated on NASA Langley's central computing system is described. Preliminary results of its application to an investigation of an innovative display system under development in Langley's terminal configured vehicle program are considered

Definition of ground test for verification of large space structure control

Directions regarding the analytical models were received. A counter balance arm with weights was added at the top of the ASTROMAST to offset the arm with the gimbals. In addition to this model, three more models were requested from MSFC: structure as in the revised model with the addition of lumped masses at bays 46 and 91 of the ASTROMAST; cantilevered cruciform structure with lumped masses at bays 46 and 91, and an all up cruciform structure with lumped masses at bays 46 and 91. Figures for each model and their corresponding natural frequencies and general mode shapes associated with these frequencies are included. The drawbar in use in the cruciform models must be incorporated into the antenna and ASTROMAST models. The total tensile load carrying capability of the ASTROMAST is approximately 840 pounds

Comparison of Novel Carboneous Structures to Treat Nitroaromatic Impacted Water

Carboneous materials such as carbon nanotube (CNT), granular activated carbon (GAC), and biochar are promising materials for the removal of organic contaminants from aqueous phase solutions. CNTs have astonishing mechanical strength, chemical and thermal stability and high surface area. While biochar, similar to GAC, having an extremely porous structure and high surface area, can be produced in more austere conditions with native materials. In this study, novel CNT-Hybrid structures (CNT-HS), hardwood pellet (HWP) Biochar and standard GAC (F-600 GAC) were used as adsorbents to treat water contaminated by a model nitroaromatic compound, 2,4-dinitrotoluene (DNT)

NASA-VCOSS dynamic test facility

The Large Space Structure Ground Test Facility under development at the NASA Marshall Space Flight Center in Huntsville, Alabama is described. The Ground Test Facility was established initially to test experimentally the control system to be used on the Solar Array flight Experiment. The structural dynamics of the selected test article were investigated, including the fidelity of the associated mathematical model. The facility must permit the investigation of structural dynamics phenomena and be able to evaluate candidate attitude control and vibration suppression techniques

An integrated Rotorcraft Avionics/Controls Architecture to support advanced controls and low-altitude guidance flight research

Salient design features of a new NASA/Army research rotorcraft--the Rotorcraft-Aircrew Systems Concepts Airborne Laboratory (RASCAL) are described. Using a UH-60A Black Hawk helicopter as a baseline vehicle, the RASCAL will be a flying laboratory capable of supporting the research requirements of major NASA and Army guidance, control, and display research programs. The paper describes the research facility requirements of these programs together with other critical constraints on the design of the research system. Research program schedules demand a phased development approach, wherein specific research capability milestones are met and flight research projects are flown throughout the complete development cycle of the RASCAL. This development approach is summarized, and selected features of the research system are described. The research system includes a real-time obstacle detection and avoidance system which will generate low-altitude guidance commands to the pilot on a wide field-of-view, color helmet-mounted display and a full-authority, programmable, fault-tolerant/fail-safe, fly-by-wire flight control system

Impulsivity Like Traits and Risky Driving Behaviors Among College Students

The present study examined the predictive effects of five impulsivity-like traits (Premeditation, Perseverance, Sensation Seeking, Negative Urgency, and Positive Urgency) on driving outcomes (driving errors, driving lapses, driving violations, cell phone driving, traffic citations, and traffic collisions). With a convenience sample of 266 college student drivers, we found that each of the impulsivity-like traits was related to multiple risky driving outcomes. Positive Urgency (tendency to act impulsively when experiencing negative affect) was the most robust predictor of risky driving outcomes. Positive Urgency is a relatively newly conceptualized impulsivity-like trait that was not examined in the driving literature previously, suggesting a strong need to further examine its role as a personality trait related to risky driving. These findings generally support the multidimensional assessment of impulsivity-like traits, and they specifically support the addition of Positive Urgency to a list of risk factors for risky driving behaviors

Learning from Instruction: A Compretiension-Based Approach

A comprehension-based approach to learning assumes that incoming information and background knowledge are integrated to form a mental representation which is subsequently used to incorporate new knowledge. We demonstrate that this approach can indicate when people will learn from instructions. Specifically, we show that a computational model based on the construction-integration theory of comprehension (Kintsch, 1988) can explain and predict how individual users will comprehend help prompts that guide their generation of successful complex commands within an operating system

Problematizing Choice: Responsible consumers and sceptical citizens

About the book: Governance, Consumers and Citizens is the first book to bring together a study of governance with consumption, examining the changing place of the consumer as citizen in recent trends in governance, the tensions between competing ideas and practices of consumerism and the active role consumers play in the construction and practice of governance. Radically pushing forward the debate on consumers and governance, this collection outlines new conceptions and posits new policy agendas. Bringing together international experts from political science, history, geography, social policy and media studies, this study shows how governance and consumption are intertwined in crucial aspects of public policy and contemporary politics

Case Study: Cooling Channels for Material Testing Applications Using Laser Powder Bed Fusion

Additive Manufacturing continues to gain a reputation as a key technology that will have a major impact on all aspects of mechanical engineering. The United States Air Force’s (USAF) Air Force Institute of Technology (AFIT), based in Dayton, Ohio, has expanded its AM-focused education and R&D capabilities with the purchase of a Laser Powder Bed Fusion system from Germany’s Concept Laser