Attitudes to ageing and objectively-measured sedentary and walking behaviour in older people: the Lothian Birth Cohort 1936

Background:Prolonged sitting and low activity—both common in older people—are associated with increased mortality and poorer health. Whether having a more negative attitude to ageing is associated with higher levels of these behaviours is unclear.Objective:We investigated the prospective relationship between attitudes to ageing and objectively measured sedentary and walking behaviour.Methods:Participants were 271 members of the Lothian Birth Cohort 1936. At age 72 years, participants completed the Attitudes to Ageing Questionnaire which assesses attitudes on three domains—Psychosocial loss, Physical change and Psychological growth. At age 79 years, participants wore an activPAL activity monitor for seven days. The outcome measures were average daily time spent sedentary, number of sit-to-stand transitions, and step count.Results:There were no significant associations between any of the Attitude to Ageing domain scores and time spent sedentary or number of sit-to-stand transitions. In sex-adjusted analysis, having a more positive attitude to ageing as regards Physical change was associated with a slightly higher daily step count, for a SD increment in score, average daily step count was greater by 1.5% (95% CI 0.6%, 2.4%). On further adjustment for potential confounding factors these associations were no longer significant.Conclusion:We found no evidence that attitudes to ageing at age 72 were predictive of sedentary or walking behaviour seven years later. Future studies should examine whether attitudes to ageing are associated with objectively measured walking or sedentary behaviour at the same point in time. The existence of such an association could inform the development of interventions.<br/

The associations of personality traits and parental education with smoking behaviour among adolescents

We examined whether personality traits and parental education are associated with smoking initiation in a sample of Spanish secondary school students. Participants, taken from the ITACA study (842 adolescents aged 14-15 years), completed a questionnaire assessing personality traits of the Five Factor Model, smoking behaviours and parental education. Multinomial logistic regression models controlling for age and sex were used to determine the independent associations and interactions of personality traits and parental education with risk of ever trying smoking, as well as with being a regular smoker in adolescence. Higher conscientiousness was related to a lower chance of trying smoking at least once (OR = 0.57, 95% CIs = 0.46, 0.71) as well as being a regular smoker (OR = 0.39, 95% CIs = 0.27, 0.55). Higher emotional instability (neuroticism) was associated with higher risk of being in either smoking category (OR = 1.33, 95% CIs = 1.10, 1.60 and OR = 1.76, 95% CIs = 1.31, 2.35, respectively). Higher extraversion was also associated with a higher risk of both types of smoking behaviour (OR = 1.38, 95% CIs = 1.12, 1.70 and OR = 2.43 (1.67, 3.55, respectively). Higher parental education was significantly related to lower risk of being a regular smoker (OR = 0.70, 95% CIs = 0.54, 0.89), but not with trying smoking in the past. Finally, we found no evidence of the interactions between adolescents' personality and parental education in predicting adolescent smoking behaviours. We conclude that personality factors and parental education are important and independent factors associated with smoking behaviour in adolescents

Improvement Opportunities and Suggestions for Benchmarking

During the past 10 years, the amount of effort put on setting up benchmarking repositories has considerably increased at the organizational, national and even at international levels to help software managers to determine the performance of software activities and to make better software estimates. This has enabled a number of studies with an emphasis on the relationship between software product size, effort and cost factors in order to either measure the average performance for similar software projects or develop reliable estimation models and then refine them using the collected data. However, despite these efforts, none of those methods are yet deemed to be universally applicable and there is still no agreement on which cost factors are significant in the estimation process. This study discusses some of the possible reasons why in software engineering, practitioners and researchers have not yet been able to come up with well defined relationships between effort and cost drivers although considerable amounts of data on software projects have been collected.Volume 5891/200

Cross-sectional associations between personality traits and device-based measures of step count and sedentary behaviour in older age: the Lothian Birth Cohort 1936

Background: While the associations between personality traits and self-reported physical activity are well replicated, few studies have examined the associations between personality and device-based measures of both physical activity and sedentary behaviour. Low levels of physical activity and high levels of sedentary behaviour are known risk factors for poorer health outcomes in older age. Methods: We used device-based measures of physical activity and sedentary behaviour recorded over 7 days in 271 79-year-old participants of the Lothian Birth Cohort 1936. Linear regression models were used to assess whether personality traits were cross-sectionally associated with step count, sedentary time, and the number of sit-to-stand transitions. Personality traits were entered one at a time, and all-together, controlling for age and sex in Model 1 and additionally for BMI and limiting long-term illness in Model 2. Results: None of the associations between personality traits and measures of physical activity and sedentary behaviours remained significant after controlling for multiple-comparisons using the False Discovery Rate test (all ps &gt;.07). Conclusions: We found no evidence that personality traits are associated with device-based measures of physical activity or sedentary behaviour in older age. More studies are needed to replicate and examine the nature of these relationships.</p

Direct-current-dependent shift of theta-burst-induced plasticity in the human motor cortex

Animal studies using polarising currents have shown that induction of synaptic long-term potentiation (LTP) and long-term depression (LTD) by bursts of patterned stimulation is affected by the membrane potential of the postsynaptic neurone. The aim of the present experiments was to test whether it is possible to observe similar phenomena in humans with the aim of improving present protocols of inducing synaptic plasticity for therapeutic purposes. We tested whether the LTP/LTD-like after effects of transcranial theta-burst stimulation (TBS) of human motor cortex, an analogue of patterned electrical stimulation in animals, were affected by simultaneous transcranial direct-current stimulation (tDCS), a non-invasive method of polarising cortical neurones in humans. Nine healthy volunteers were investigated in a single-blind, balanced cross-over study; continuous TBS (cTBS) was used to introduce LTD-like after effects, whereas intermittent TBS (iTBS) produced LTP-like effects. Each pattern was coupled with concurrent application of tDCS (<200 s, anodal, cathodal, sham). Cathodal tDCS increased the response to iTBS and abolished the effects of cTBS. Anodal tDCS changed the effects of cTBS towards facilitation, but had no impact on iTBS. Cortical motor thresholds and intracortical inhibitory/facilitatory networks were not altered by any of the stimulation protocols. We conclude that the after effects of TBS can be modulated by concurrent tDCS. We hypothesise that tDCS changes the membrane potential of the apical dendrites of cortical pyramidal neurones and that this changes the response to patterned synaptic input evoked by TBS. The data show that it may be possible to enhance LTP-like plasticity after TBS in the human cortex

Nonlinear dynamics of meteorological variables: Multifractality and chaotic invariants in daily records from Pastaza, Ecuador

Weather represents the daily state of the atmosphere. It is usually considered as a chaotic nonlinear dynamical system. The objectives of the present study were (1) to investigate multifractal meteorological trends and rhythms at the Amazonian area of Ecuador and (2) to estimate some nonlinear invariants for describing the meteorological dynamics. Six meteorological variables were considered in the study. Datasets were collected on a daily basis from January 1st 2001 to January 1st 2005 (1,460 observations). Based on a new multifractal method, we found interesting fractal rhythms and trends of antipersistence patterns (Fractal Dimension >1.5). Nonlinear time series analyses rendered Lyapunov exponent spectra containing more than one positive Lyapunov exponent in some cases. This sort of hyperchaotic structures could explain, to some extent, larger fractal dimension values as the Kaplan-Yorke dimension was also in most cases larger than two. The maximum prediction time ranged from ξ = 1.69 days (approximately 41 h) for E/P ratio to ξ = 14.71 days for evaporation. Nonlinear dynamics analyses could be combined with multifractal studies for describing the time evolution of meteorological variables. © 2009 Springer-Verlag

Ancillary findings assessed by ventilation/perfusion tomography. Impact and clinical outcome in patients with suspected pulmonary embolism.

Ventilation/perfusion tomography (V/P SPECT) is a recommended method for diagnosing and follow-up of pulmonary embolism (PE). Moreover, it is possible to recognize other pathologies in addition to PE, such as pneumonia, COPD and left heart failure (LHF). The objective of this prospective study was to identify frequency of ancillary findings among patients with suspected PE. Patients, material, method: 331 consecutive patients with suspected PE were examined and classified with V/P SPECT. Patients were followed up clinically and by means of other laboratory tests

Selection of the Most Appropriate Technology of Reparatory Hard Facing of Working Parts on Universal Construction Machinery

The aim of this work is to analyse the possibility to increase the service life of working parts on construction machinery exposed to intensive wear, such as steel blades of the rotary device for roadside vegetation maintenance and grass cutting. A special attention is paid to characteristic working conditions and complex wear mechanisms. In order to select the most appropriate reparation technology, both model and real investigations were conducted. The aim of the model investigations was to select the most appropriate procedure, filler materials and hard facing technology. Worn cutting edges of the blades were hard faced and sharpened by grinding to the shape and dimensions of new blades. Then, both new and repaired blades were alternately mounted on the rotor of the machine. Their wear was monitored under the same working and weather conditions. The repaired blades have proven more resistant to wear than the new ones, which is due to better properties of the hard faced layers

Reparation of damaged forging dies by hard facing (HF) technology

The forging dies are in exploitation exposed to elevated temperatures and variable impact loads, both compressive and shear. Steels for manufacturing of these tools must endure those loads while maintaining mechanical properties and being resistant to wear and thermal fatigue. For those reasons, the alloyed steels are used for making the forging dies, though they have less weldability, because alloying increases proneness to hardening. Any reparatory hard facing (HF) of the damaged dies would require the specially adjusted technology to the particular piece. In this paper reparatory hard facing of dies used for forging pieces in the automobile industry is considered. Prior to reparatory hard facing of the real tools, numerous experimental hard facings on models were performed. All the model hard facings were done on the same steels which were used for production of the real forging dies. To define the optimal hard facing technology one needs to derive the optimal combination of the adequate heat treatment(s), to select the proper filler metals and the welding procedure. The established optimal HF technology was applied to real forging dies whose service life was further monitored in conditions of exploitation