Micromegas for Imaging Calorimetry

International audienceTwo Micromegas chambers of 1 m2 size and 1 cm2 cell segmentation have recently been built. Designed for Particle-Flow hadron calorimetry, each chamber features ten thousand channels with embedded front-end electronics and three readout thresholds (concept of semi-digital hadron calorimeter or SDHCAL). The chambers have been tested in a muon beam and also exposed to hadron showers inside a steel structure. Excellent performance such as low noise, high efficiency and very uniform spatial response have been measured and will be reported. The measurements will be confronted to the predictions of a Monte Carlo simulation for which a complete digitisation procedure has been established. Finally, prospects towards the use of a Micromegas SDHCAL at a future linear collider will be discussed based on the scalability of current prototypes to larger sizes and on the expected energy resolution and linearity of such a device

RD51, a world-wide collaboration for the development of Micro Pattern Gaseous Detectors

International audienceOriginally introduced to improve the rate capability of traditional wire chambers, Micro Pattern Gaseous Detectors (MPGD) actually demonstrate many more benefits. Be it for medical and industry imaging, collider experiments or more interestingly in the framework of this conference for the search of rare events, they are the subject of constant research and development in several laboratories over the world. The RD51 collaboration has been coordinating this work since April 2008 and is meant to advance the technological development and application of MPGD. The collaboration is presented and emphasis is put on its latest achievements which do make these devices an attractive option for the detection of low energy rare events: the possibility to instrument large area and to detect UV photons

Status of the Micromegas semi-DHCAL

The activities towards the fabrication and test of a 1 m3 semi-digital hadronic calorime- ter are reviewed. The prototype sampling planes would consist of 1 m2 Micromegas chambers with 1 cm2 granularity and embedded 2 bits readout suitable for PFA calorime- try at an ILC detector. The design of the 1 m2 chamber is presented first, followed by an overview of the basic performance of small prototypes. The basic units composing the 1 m2 chamber are 32 \times 48 cm2 boards with integrated electronics and a micro-mesh. Results of character- ization tests of such boards are shown. Micromegas as a proportional detector is well suited for semi-digital hadronic calorimetry. In order to quantify the gain in perfor- mance when using one or more thresholds, simulation studies are being carried out, some of which will be reported in this contribution

Readout of GEM Detectors Using the Medipix2 CMOS Pixel Chip

We have operated a Medipix2 CMOS readout chip, with amplifying, shaping and charge discriminating front-end electronics integrated on the pixel-level, as a highly segmented direct charge collecting anode in a three-stage gas electron multiplier (Triple-GEM) to detect the ionization from $^{55}$Fe X-rays and electrons from $^{106}$Ru. The device allows to perform moderate energy spectroscopy measurements (20 % FWHM at 5.9 keV $X$-rays) using only digital readout and two discriminator thresholds. Being a truly 2D-detector, it allows to observe individual clusters of minimum ionizing charged particles in $Ar/CO_2$ (70:30) and $He/CO_2$ (70:30) mixtures and to achieve excellent spatial resolution for position reconstruction of primary clusters down to $\sim 50 \mu m$, based on the binary centroid determination method.Comment: 18 pages, 14 pictures. submitted to Nuclear Instruments and Methods in Physics Research

Characterization of microbulk detectors in argon- and neon-based mixtures

A recent Micromegas manufacturing technique, so called Microbulk, has been developed, improving the uniformity and stability of this kind of detectors. Excellent energy resolutions have been obtained, reaching values as low as 11% FWHM at 5.9 keV in Ar+5%iC4H10. This detector has other advantages like its flexible structure, low material budget and high radio-purity. Two microbulk detectors with gaps of 50 and 25 um have been characterized in argon- and neon-based mixtures with ethane, isobutane and cyclohexane. The results will be presented and discussed. The gain curves have been fitted to the Rose-Korff gain model and dependences of the electron mean free path and the threshold energy for ionization have been obtained. The possible relation between these two parameters and the energy resolution will be also discussed.Comment: Submitted to the Journal of Instrumentatio

Technological aspects of gaseous pixel detectors fabrication

Integrated gaseous pixel detectors consisting of a metal punctured foil suspended in the order of 50μm over a pixel readout chip by means by SU-8 insulating pillars have been fabricated. SU-8 is used as sacrificial layer but metallization over uncrosslinked SU-8 presents adhesion and stress problems. In this paper we describe the several methods we have investigated to fabricate a metal layer on top of a partially crosslinked SU-8 film and the challenges we have encountered. The fabrication process using wafer post processing has been proven, but in cases where single chip processing is desirable, edge bead is a major problem to overcome as it can cover a considerable chip area, reducing the detector performance; we show different techniques to reduce this edge bead and improve detection efficiency

Resistive micromegas for sampling calorimetry

MicromegasInternational audienceMicromegas is an attractive option for a gaseous sampling calorimeter. It delivers proportional and fast signals, achieves high efficiency to minimum ionising particles with a compact design and shows well-uniform performance over meter-square areas. The current R&D focuses on large- size spark-protected Micromegas with integrated front-end electronics. It targets an application at future linear colliders (LC) and possible upgrades of LHC experiments for the running at high luminosity. In the later case, occasional sparking should be suppressed to avoid dead-time and technical solutions using resistive coatings are investigated. Small prototypes of resistive and non-resistive Micromegas were constructed and tested in a beam at DESY. Results are reported with emphasis on the impact of the resistive layer on the detector performance

MICROMEGAS chambers for hadronic calorimetry at a future linear collider

Prototypes of MICROMEGAS chambers, using bulk technology and analog readout, with 1x1cm2 readout segmentation have been built and tested. Measurements in Ar/iC4H10 (95/5) and Ar/CO2 (80/20) are reported. The dependency of the prototypes gas gain versus pressure, gas temperature and amplification gap thickness variations has been measured with an 55Fe source and a method for temperature and pressure correction of data is presented. A stack of four chambers has been tested in 200GeV/c and 7GeV/c muon and pion beams respectively. Measurements of response uniformity, detection efficiency and hit multiplicity are reported. A bulk MICROMEGAS prototype with embedded digital readout electronics has been assembled and tested. The chamber layout and first results are presented

Recent results of Micromegas sDHCAL with a new readout chip

Calorimetry at future linear colliders could be based on a particle flow approach where granularity is the key to high jet energy resolution. Among different technologies, Micromegas chambers with 1 cm2 pad segmentation are studied for the active medium of a hadronic calorimeter. A chamber of 1 m2 with 9216 channels read out by a low noise front-end ASIC called MICROROC has recently been constructed and tested. Chamber design, ASIC circuitry and preliminary test beam results are reported