First measurements of p11B fusion in a magnetically confined plasma

Proton-boron (p11B) fusion is an attractive potential energy source but technically challenging to implement. Developing techniques to realize its potential requires first developing the experimental capability to produce p11B fusion in the magnetically-confined, thermonuclear plasma environment. Here we report clear experimental measurements supported by simulation of p11B fusion with high-energy neutral beams and boron powder injection in a high-temperature fusion plasma (the Large Helical Device) that have resulted in diagnostically significant levels of alpha particle emission. The injection of boron powder into the plasma edge results in boron accumulation in the core. Three 2 MW, 160 kV hydrogen neutral beam injectors create a large population of well-confined, high -energy protons to react with the boron plasma. The fusion products, MeV alpha particles, are measured with a custom designed particle detector which gives a fusion rate in very good relative agreement with calculations of the global rate. This is the first such realization of p11B fusion in a magnetically confined plasma

Generation and transport of a low energy intense ion beam

The paper describes experiments on the generation and transport of a low energy (70-120 keV), high intensity (10-30 A/cm(2)) microsecond duration H+ ion beam (IB) in vacuum and plasma. The IB was generated in a magnetically insulated diode (MID) with an applied radial B field and an active hydrogen-puff ion source. The annular IB, with an initial density of j(i)similar to10-20 A/cm(2) at the anode surface, was ballistically focused to a current density in the focal plane of 50-80 A/cm(2). The postcathode collimation and transport of the converging IB were provided by the combination of a "concave" toroidal magnetic lens followed by a straight transport solenoid section. With optimized MID parameters and magnetic fields in the lens/solenoid system, the overall efficiency of IB transport at the exit of the solenoid 1 m from the anode was similar to 50% with an IB current density of 20 A/cm(2). Two-dimensional computer simulations of post-MID IB transport supported the optimization of system parameters. (C) 2004 American Institute of Physics

Suppressed ion-scale turbulence in a hot high-β plasma

An economic magnetic fusion reactor favours a high ratio of plasma kinetic pressure to magnetic pressure in a well-confined, hot plasma with low thermal losses across the confining magnetic field. Field-reversed configuration (FRC) plasmas are potentially attractive as a reactor concept, achieving high plasma pressure in a simple axisymmetric geometry. Here, we show that FRC plasmas have unique, beneficial microstability properties that differ from typical regimes in toroidal confinement devices. Ion-scale fluctuations are found to be absent or strongly suppressed in the plasma core, mainly due to the large FRC ion orbits, resulting in near-classical thermal ion confinement. In the surrounding boundary layer plasma, ion- and electron-scale turbulence is observed once a critical pressure gradient is exceeded. The critical gradient increases in the presence of sheared plasma flow induced via electrostatic biasing, opening the prospect of active boundary and transport control in view of reactor requirements

Suppressed ion-scale turbulence in a hot high-β plasma.

An economic magnetic fusion reactor favours a high ratio of plasma kinetic pressure to magnetic pressure in a well-confined, hot plasma with low thermal losses across the confining magnetic field. Field-reversed configuration (FRC) plasmas are potentially attractive as a reactor concept, achieving high plasma pressure in a simple axisymmetric geometry. Here, we show that FRC plasmas have unique, beneficial microstability properties that differ from typical regimes in toroidal confinement devices. Ion-scale fluctuations are found to be absent or strongly suppressed in the plasma core, mainly due to the large FRC ion orbits, resulting in near-classical thermal ion confinement. In the surrounding boundary layer plasma, ion- and electron-scale turbulence is observed once a critical pressure gradient is exceeded. The critical gradient increases in the presence of sheared plasma flow induced via electrostatic biasing, opening the prospect of active boundary and transport control in view of reactor requirements

Generation and transport of a low energy intense ion beam

The paper describes experiments on the generation and transport of a low energy (70-120 keV), high intensity (10-30 A/cm(2)) microsecond duration H+ ion beam (IB) in vacuum and plasma. The IB was generated in a magnetically insulated diode (MID) with an applied radial B field and an active hydrogen-puff ion source. The annular IB, with an initial density of j(i)similar to10-20 A/cm(2) at the anode surface, was ballistically focused to a current density in the focal plane of 50-80 A/cm(2). The postcathode collimation and transport of the converging IB were provided by the combination of a "concave" toroidal magnetic lens followed by a straight transport solenoid section. With optimized MID parameters and magnetic fields in the lens/solenoid system, the overall efficiency of IB transport at the exit of the solenoid 1 m from the anode was similar to 50% with an IB current density of 20 A/cm(2). Two-dimensional computer simulations of post-MID IB transport supported the optimization of system parameters. (C) 2004 American Institute of Physics