Electrical and Elastic Properties of Individual Single-Layer Nb₄C₃Tₓ MXene Flakes

2D carbides and nitrides (MXenes) are widely recognized for their exceptional promise for numerous applications. However, physical property measurements of their individual monolayers remain very limited despite their importance for revealing the intrinsic physical properties of MXenes. The first mechanical and electrical measurements of individual single‐layer flakes of Nb4C3Tx MXene, which are prepared via an improved synthetic method are reported. Characterization of field‐effect transistor devices based on individual single‐layer Nb4C3Tx flakes shows an electrical conductivity of 1024 ± 165 S cm−1, which is two orders of magnitude higher than the previously reported values for bulk Nb4C3Tx assemblies, and an electron mobility of 0.41 ± 0.27 cm2 V−1 s−1. Atomic force microscopy nanoindentation measurements of monolayer Nb4C3Tx membranes yield an effective Young's modulus of 386 ± 13 GPa, assuming a membrane thickness of 1.26 nm. This is the highest value reported for nanoindentation measurements of solution‐processable 2D materials, revealing the potential of Nb4C3Tx as a primary component for various mechanical applications. Finally, the agreement between the mechanical properties of 2D Nb4C3Tx MXene and cubic NbC suggests that the extensive experimental data on bulk carbides could be useful for identifying new MXenes with improved functional characteristics

High capacity silicon anodes enabled by MXene viscous aqueous ink

The ever-increasing demands for advanced lithium-ion batteries have greatly stimulated the quest for robust electrodes with a high areal capacity. Producing thick electrodes from a high-performance active material would maximize this parameter. However, above a critical thickness, solution-processed films typically encounter electrical/mechanical problems, limiting the achievable areal capacity and rate performance as a result. Herein, we show that two-dimensional titanium carbide or carbonitride nanosheets, known as MXenes, can be used as a conductive binder for silicon electrodes produced by a simple and scalable slurry-casting technique without the need of any other additives. The nanosheets form a continuous metallic network, enable fast charge transport and provide good mechanical reinforcement for the thick electrode (up to 450 µm). Consequently, very high areal capacity anodes (up to 23.3 mAh cm−2) have been demonstrated

All Pseudocapacitive MXene-RuO<inf>2</inf> Asymmetric Supercapacitors

2D transition metal carbides and nitrides, known as MXenes, are an emerging class of 2D materials with a wide spectrum of potential applications, in particular in electrochemical energy storage. The hydrophilicity of MXenes combined with their metallic conductivity and surface redox reactions is the key for high-rate pseudocapacitive energy storage in MXene electrodes. However, symmetric MXene supercapacitors have a limited voltage window of around 0.6 V due to possible oxidation at high anodic potentials. In this study, the fact that titanium carbide MXene (Ti3C2Tx) can operate at negative potentials in acidic electrolyte is exploited, to design an all-pseudocapacitive asymmetric device by combining it with a ruthenium oxide (RuO2) positive electrode. This asymmetric device operates at a voltage window of 1.5 V, which is about two times wider than the operating voltage window of symmetric MXene supercapacitors, and is the widest voltage window reported to date for MXene-based supercapacitors. The complementary working potential windows of MXene and RuO2, along with proton-induced pseudocapacitance, significantly enhance the device performance. As a result, the asymmetric devices can deliver an energy density of 37 µW h cm−2 at a power density of 40 mW cm−2, with 86% capacitance retention after 20 000 charge–discharge cycles. These results show that pseudocapacitive negative MXene electrodes can potentially replace carbon-based materials in asymmetric electrochemical capacitors, leading to an increased energy density

Electrochemical Actuators Based on Two-Dimensional Ti₃C₂Tₓ (MXene)

Electrochemical actuators are devices that convert electrical energy into mechanical energy via electrochemical processes. They are used in soft robotics, artificial muscles, micropumps, sensors, and other fields. The design of flexible and stable electrode materials remains a major challenge. MXenes, an emerging family of 2D materials, have found applications in energy storage. Here, we report an actuator device using MXene (Ti3C2Tx) as a flexible electrode material. The electrode in 1 M H2SO4 electrolyte exhibits a curvature change up to 0.083 mm–1 and strain of 0.29%. Meanwhile, the MXene-based actuator with a symmetric configuration separated by gel electrolyte (PVA–H2SO4) has curvature and strain changes up to 0.038 mm–1 and 0.26% with excellent retention after 10,000 cycles. In situ X-ray diffraction analysis demonstrates that the actuation mechanism is due to the expansion and shrinkage of the interlayer spacing of MXenes. This research shows promise of this new family of materials for electrochemical actuators

Highly Broadband Absorber Using Plasmonic Titanium Carbide (MXene)

Control of light transmission and reflection through nanostructured materials has led to demonstration of metamaterial absorbers that have augmented the performance of energy harvesting applications of several optoelectronic and nanophotonic systems. Here, for the first time, a broadband plasmonic metamaterial absorber is fabricated using two-dimensional titanium carbide (Ti₃C₂T_<i>x</i>) MXene. Arrays of nanodisks made of Ti₃C₂T_<i>x</i> exhibit strong localized surface plasmon resonances at near-infrared frequencies. By exploiting the scattering enhancement at the resonances and the optical losses inherent to Ti₃C₂T_<i>x</i> MXene, high-efficiency absorption (∼90%) for a wide wavelength window of incident illumination (∼1.55 μm) has been achieved