180 research outputs found
Radiative recombination in Cu2ZnSnSe4 thin films with Cu deficiency and Zn excess
Thin films of Cu2ZnSnSe4 (CZTSe) with copper de�ficiency and zinc excess were fabricated at Northumbria University by the selenisation of metallic precursors deposited on Mo/glass and bare glass substrates. Absorption and photoluminescence (PL) measurements were used to examine the �film on glass whereas fi�lms on Mo/glass were used to produce a solar cell with ef�ficiency of 8.1%. Detailed temperature and excitation intensity analysis of PL spectra allows identifi�cation of the main recombination mechanisms as band-to-tail and band-to-band transitions. The latter transition was observed in the spectra from 6 to 300 K
Impact of the selenisation temperature on the structural and optical properties of CZTSe absorbers
We present structural and optical spectroscopy studies of thin films of Cu2ZnSnSe4 (CZTSe) with strong copper deficiency deposited on Mo/Glass substrates and selenised at 450, 500 or 550 °C. Solar cells fabricated from these films demonstrated efficiencies up to 7.4% for selenisation at 500 °C. Structural analysis based on X-ray diffraction and Raman spectroscopy revealed the presence of SnSe2 in the film selenised at 450 °C but not detected in the films selenised at higher temperatures. A progressive decrease of the Sn and Se content was observed as the selenisation temperature increased. Photoluminescence excitation was used to determine the bandgaps at 4.2 K. Detailed measurements of the temperature and excitation intensity dependencies of the photoluminescence spectra allow the recombination mechanisms of the observed emission bands to be identified as band-to-impurity and band-to-band transitions, and their evolution with selenisation temperature changes to be analysed. The strongest band-to-band transition is recorded in the PL spectra of the film selenised at 500 °C and can be observed from 6 K to room temperature. The compositional and structural changes in the films and their influence on the optoelectronic properties of CZTSe and solar cells are discussed
Fuente de Alimentación para los Imanes Superconductores del Acelerador de Partículas Europeo XFEL
En este artículo se presenta la fuente de alimentación que se está diseñando para alimentar los imanes superconductores del acelerador de partículas europeo XFEL que se está construyendo en Hamburgo, cuyas características le hacen el más avanzado del mundo. Un imán superconductor es una carga muy inductiva que debe ser controlada en corriente y que presenta una caída de tensión muy baja cuando está en modo superconductor. La fuente debe ser capaz de alimentar esta carga con una alta fiabilidad e incorporar varias protecciones que protejan esta carga tan especial
A luminescence study of Cu2ZnSnSe4/Mo/glass films and solar cells with near stoichiometric copper content
Cu2ZnSnSe4 (CZTSe) is one of the leading candidates for the absorber layer in sustainable solar cells. Thin films of CZTSe with a near stoichiometric [Cu]/[Zn+Sn] were used to produce solar cells with conversion efficiency η = 6.4% by a standard solar cell processing including KCN etching and the deposition of CdS and ZnO. Both CZTSe films and solar cells were examined using photoluminescence (PL) to analyse the nature of radiative recombination and photoluminescence excitation (PLE) at 4.2 K to determine the bandgap (Eg). Low temperature PL spectra of the films reveal an intense band P1 at 0.81 eV and a low intensity band P2 at 0.93 eV. Their temperature and excitation intensity dependencies suggest that they both involve recombinations of free electrons with holes localised at acceptors with the energy level influenced by potential fluctuations in the valence band . We associate P1 and P2 with different fractions of CZTSe: with a lower and higher degree of order of Cu and Zn on the cati on sub-lattice, respectively. Device processing reduced the intensity of P1 by 2.5 whereas the intensity of P2 increased by a 1.5. We assign this to a low temperature annealing due to CdS and ZnO deposition which increased the fraction of CZTSe with high d egree of Cu/Zn order and decreased the fraction with low degree of Cu/Zn order. Device processing increased Eg, blue shifted P1, decreased its width, j-shift and the mean depth of potential fluctuations. These can also be related to the annealing and/or KCN etching and the chemical effect of Cd, due to CdS replacing copper at the CdS - CZTSe interface layer. Processing induced a new broad band P3 at 1.3 eV (quenching with Ea = 200 meV) which we attributed to defects in the CdS layer
A new saurolophine hadrosaurid (Dinosauria: Ornithopoda) from the Upper Cretaceous of Shandong, China
Dynamics of dental evolution in ornithopod dinosaurs.
Ornithopods were key herbivorous dinosaurs in Mesozoic terrestrial ecosystems, with a variety of tooth morphologies. Several clades, especially the 'duck-billed' hadrosaurids, became hugely diverse and abundant almost worldwide. Yet their evolutionary dynamics have been disputed, particularly whether they diversified in response to events in plant evolution. Here we focus on their remarkable dietary adaptations, using tooth and jaw characters to examine changes in dental disparity and evolutionary rate. Ornithopods explored different areas of dental morphospace throughout their evolution, showing a long-term expansion. There were four major evolutionary rate increases, the first among basal iguanodontians in the Middle-Late Jurassic, and the three others among the Hadrosauridae, above and below the split of their two major clades, in the middle of the Late Cretaceous. These evolutionary bursts do not correspond to times of plant diversification, including the radiation of the flowering plants, and suggest that dental innovation rather than coevolution with major plant clades was a major driver in ornithopod evolution
- …