Analyses of Effects of Cutting Parameters on Cutting Edge Temperature Using Inverse Heat Conduction Technique

During machining energy is transformed into heat due to plastic deformation of the workpiece surface and friction between tool and workpiece. High temperatures are generated in the region of the cutting edge, which have a very important influence on wear rate of the cutting tool and on tool life. This work proposes the estimation of heat flux at the chip-tool interface using inverse techniques. Factors which influence the temperature distribution at the AISI M32C high speed steel tool rake face during machining of a ABNT 12L14 steel workpiece were also investigated. The temperature distribution was predicted using finite volume elements. A transient 3D numerical code using irregular and nonstaggered mesh was developed to solve the nonlinear heat diffusion equation. To validate the software, experimental tests were made. The inverse problem was solved using the function specification method. Heat fluxes at the tool-workpiece interface were estimated using inverse problems techniques and experimental temperatures. Tests were performed to study the effect of cutting parameters on cutting edge temperature. The results were compared with those of the tool-work thermocouple technique and a fair agreement was obtained

A probabilistic neural network applied in monitoring tool wear in the end milling operation via acoustic emission and cutting power signals

Tool condition monitoring, which is very important in machining, has improved over the past 20 years. Several process variables that are active in the cutting region, such as cutting forces, vibrations, acoustic emission (AE), noise, temperature, and surface finish, are influenced by the state of the cutting tool and the conditions of the material removal process. However, controlling these process variables to ensure adequate responses, particularly on an individual basis, is a highly complex task. The combination of AE and cutting power signals serves to indicate the improved response. In this study, a new parameter based on AE signal energy (frequency range between 100 and 300 kHz) was introduced to improve response. Tool wear in end milling was measured in each step, based on cutting power and AE signals. The wear conditions were then classified as good or bad, the signal parameters were extracted, and the probabilistic neural network was applied. The mean and skewness of cutting power and the root mean square of the power spectral density of AE showed sensitivity and were applied with about 91% accuracy. The combination of cutting power and AE with the signal energy parameter can definitely be applied in a tool wear-monitoring system20 issue 3 on pages3386405CONSELHO NACIONAL DE DESENVOLVIMENTO CIENTÍFICO E TECNOLÓGICO - CNPQCOORDENAÇÃO DE APERFEIÇOAMENTO DE PESSOAL DE NÍVEL SUPERIOR - CAPESFUNDAÇÃO DE AMPARO À PESQUISA DO ESTADO DE MINAS GERAIS - FAPEMIGNão temNão temNão temThe authors gratefully acknowledge the Brazilian research funding agencies CNPq (National Council for Scientific and Technological Development), CAPES (Federal Agency for the Support and Improvement of Higher Education), and FAPEMIG (Minas Gerais State Research Foundation) for their financial support of this work

Formigas como Bioindicadores da Qualidade Ambiental em Diferentes Sistemas de Cultivo da Soja - DOI: 10.12971/2179-5959.v01n01a01

Formigas têm sido mencionadas como bons indicadores biológicos. Objetivou-se neste trabalho, usar esses insetos para comparar a qualidade ambiental de dois sistemas de cultivo da soja em ambiente de cerrado do Estado de Goiás. Comunidades de formigas edáficas foram amostradas ao longo de um ciclo da cultura sob sistema de plantio direto e convencional. Cinco coletas mensais por meio de armadilhas de solo tipo pitfall foram realizadas em ambas as áreas, capturando 44 morfoespécies de formigas. Trinta e cinco e 24 morfoespécies foram coletadas em área sob plantio direto e em área de plantio convencional, respectivamente. O efeito do sistema de cultivo adotado sobre a comunidade de formicídeos imediatamente antes do plantio e até dois meses após o mesmo foi significativo. Entretanto, em todas as amostragens realizadas 60 dias após o plantio, não se verificaram diferenças significativas na composição da comunidade de formicídeos nos dois locais investigados

Brazilian Flora 2020: Leveraging the power of a collaborative scientific network

International audienceThe shortage of reliable primary taxonomic data limits the description of biological taxa and the understanding of biodiversity patterns and processes, complicating biogeographical, ecological, and evolutionary studies. This deficit creates a significant taxonomic impediment to biodiversity research and conservation planning. The taxonomic impediment and the biodiversity crisis are widely recognized, highlighting the urgent need for reliable taxonomic data. Over the past decade, numerous countries worldwide have devoted considerable effort to Target 1 of the Global Strategy for Plant Conservation (GSPC), which called for the preparation of a working list of all known plant species by 2010 and an online world Flora by 2020. Brazil is a megadiverse country, home to more of the world's known plant species than any other country. Despite that, Flora Brasiliensis, concluded in 1906, was the last comprehensive treatment of the Brazilian flora. The lack of accurate estimates of the number of species of algae, fungi, and plants occurring in Brazil contributes to the prevailing taxonomic impediment and delays progress towards the GSPC targets. Over the past 12 years, a legion of taxonomists motivated to meet Target 1 of the GSPC, worked together to gather and integrate knowledge on the algal, plant, and fungal diversity of Brazil. Overall, a team of about 980 taxonomists joined efforts in a highly collaborative project that used cybertaxonomy to prepare an updated Flora of Brazil, showing the power of scientific collaboration to reach ambitious goals. This paper presents an overview of the Brazilian Flora 2020 and provides taxonomic and spatial updates on the algae, fungi, and plants found in one of the world's most biodiverse countries. We further identify collection gaps and summarize future goals that extend beyond 2020. Our results show that Brazil is home to 46,975 native species of algae, fungi, and plants, of which 19,669 are endemic to the country. The data compiled to date suggests that the Atlantic Rainforest might be the most diverse Brazilian domain for all plant groups except gymnosperms, which are most diverse in the Amazon. However, scientific knowledge of Brazilian diversity is still unequally distributed, with the Atlantic Rainforest and the Cerrado being the most intensively sampled and studied biomes in the country. In times of “scientific reductionism”, with botanical and mycological sciences suffering pervasive depreciation in recent decades, the first online Flora of Brazil 2020 significantly enhanced the quality and quantity of taxonomic data available for algae, fungi, and plants from Brazil. This project also made all the information freely available online, providing a firm foundation for future research and for the management, conservation, and sustainable use of the Brazilian funga and flora