25 research outputs found
Dielectric spectroscopic evidence of space-charge dynamic effects in lead oxyfluoroborate glasses during evolution to 'beta'-Pb'F IND. 2' electrocrystallization
Understanding of the mechanisms behind electrocrystallization in glassy electrolytes has been the subject of permanent research. For lead oxyfluoroborate glasses, evidence exists that this phenomenon involves redox-type electrochemical reactions that develop at the glass–electrode interfaces, promoting β-PbF2 crystallites nucleation. Here, especially, the form by which these glasses dielectrically act in response to the electric field in the stage preceding crystallization incidence was investigated through applying electrochemical impedance spectroscopy and polarization/depolarization current techniques. This study shows that formation of space-charge regions, which reveal a peculiar dynamics and should incorporate the electroactive species susceptible to redox reactions, is the very first detectable reaction of these glasses during evolution to electrocrystallization.FAPESPCNP
Cation size effects-modified phase and PTCR development in Er3+ and Ca2+ co-doped BaTiO3 ceramics during sintering
Development of the positive temperature coefficient of resistivity (PTCR) in Er3+ and Ca2+ co-doped ferroelectric BaTiO3 was studied in this work, with Er3+ being used to act as a donor doping. Irrespective of all the materials showing high densities after sintering at 1200 to 1300 ºC, these revealed insulator at the lowest sintering temperature, changing to semiconducting and PTCR-type materials only when the sintering temperature was further increased. Observations from X-ray diffraction help correlating this effect with phase development in this formulated (Ba,Ca,Er)TiO3 system, considering the formation of initially two separated major (Ba,Ca)TiO3- and minor (Ca,Er)TiO3-based compounds, as a consequence of cation size-induced stress energy effects. Thus, appearance and enhancement here of the semiconducting and PTCR responses towards higher sintering temperatures particularly involve the incorporation of Er3+ into the major phase, rendering finally possible the generation and "percolative-like" migration of electrons throughout the whole material.FAPESPCNP
Effect of pH-induced nanopowder deagglomeration on sintering, microstructure and dielectric properties of Ba0.77Ca0.23TiO3 ceramics
Synthesis and Electrical Properties of PZT/BaFe12O19 Multiferroic Ceramics
Multiferroic ceramics, based on the ferroelectric and ferrimagnetic phases of the Pb(Zr0.65Ti0.35)O3 (PZT) and BaFe12O19 (BaM) systems, respectively, were obtained from the conventional ceramic method. The electrical properties have been investigated in a wide temperature and frequency range. The influence of the magnetic phase on the ferroelectric and dielectric properties of the ferroelectrics phases have been taken into account. The phase transition characteristics shown to be strongly affected by the amount of the BaM phase, while the dielectric properties revealed to be directly dominated by the presence of conductive effects related to the charge transport mechanisms associated to the magnetic phase.FAPEMIG (00199-09 and 00342-10)CNPq (555496/2009-0 and 301730/2009-1)CAPES (4684/11-7
Impedance spectroscopy and dielectric properties of flash versus conventionally sintered yttria-doped zirconia electroceramics viewed at the microstructural level
The defect chemistry-modulated dielectric properties of dense yttria-doped zirconia ceramics prepared by conventional sintering (at 1350°C-1500°C) and electric field-assisted flash sintering (55 V/cm at 900°C) were studied by impedance spectroscopy. While the bulk dielectric properties from both sets of samples showed only small and insignificant changes in conductivity and permittivity, respectively, a huge increase of these properties was measured for the grain boundaries in the flash sintered specimens. A close analysis of these results suggests that flash sintering reduced grain-boundary thickness (by about 30%), while increasing the concentration of oxygen vacancies near these interfaces (by about 49%). The underlying mechanism proposed is electric field-assisted generation and accommodation of defects in the space-charge layers adjacent to the grain surface. The changes in measured permittivity are attributed to the boundary thickness effect on capacitance, while conductivity involved variations in its defect densitydependent intrinsic value, accounting for changes also observed in grain-boundary relaxation frequencies. Therefore, in terms of modifications to the specific dielectric properties of these materials, the overall consequence of flash sintering was to considerably lower the semi-blocking character of the grain boundaries.Office of Naval Research (ONR) (N00014-12-1-0710)FAPESP (12/06448-0
Effect of pH-induced nanopowder deagglomeration on sintering, microstructure and dielectric properties of Ba0.77Ca0.23TiO3 ceramics
Ba0.77Ca0.23TiO3 ceramics were produced in this work starting from nanopowders synthesized via a polymeric precursor method. By adjusting the pH values of the precursor solutions above 7, it was possible to prepare powders weakly aggregated and with a smaller particle size, both facts which traduced into an enhanced nanopowders' sintering process at comparatively lower temperatures. Irrespective of the initial pH value, highly-dense and second phase-free ceramics were obtained following optimal sintering parameters (temperature and time) extracted from dilatometric and density measurements. By considering these and other sintering conditions, moreover, polycrystalline materials with an average grain size varying from 0.35 to 8 mm were produced, the grain growth process involving liquid phase-assisted sintering for heat treatments achieved at 1320 °C. The study of grain size effects on the ferroelectric properties of these materials was conducted, the results being discussed in the light of previous debates, including grain size-dependent degree of tetragonal distortion in such materials, as verified in this work
Electroinduction of peculiar space-charge regions in fully-glassy lead oxyfluoroborate materials discerned from impedance spectroscopy
Lead oxyfluoroborate (BO1.5-PbO-PbF2) glasses were prepared and studied in this work in terms of dielectric response. By applying impedance spectroscopy, this study shows that electric field-induced peculiar space-charge regions form in these glasses, in the bulk adjacent to the glass-electrode interfaces. In addition, submission of these glasses to the action of a long-term electric field results in development of surface crystallization, even below the glass transition temperature. Evidence has been given in the literature that such a phenomenon involves electric field-induced redox-type electrochemical reactions that develop, simultaneously, at both glass-electrode interfaces, promoting β-PbF2 crystallites nucleation toward the cathode side. Accordingly, it is here concluded that the above mentioned space-charge regions should incorporate those electroactive species that look forward to participate in the redox reactions that subsequently promote incidence of this non-spontaneous crystallization phenomenon.FAPESPCNP
Correlating phase and microstructure development versus dielectric properties in La3+ and Er3+ co-doped Bi4Ti3O12 ferroelectric ceramics
Bi3.25La0.75-xErxTi3O12 and Bi3.25La0.75Ti3-xErxO12-delta ceramics were prepared and studied in this work in terms of dopant-induced phase and microstructure development as well as dielectric response. The results show that introduction of Er3+ tends to reduce the materials' sintering temperature and average grain size. Moreover, it was noted that in these systems the substitution site of this dopant is controlled by valence state and ionic radii mismatch effects. In particular, even when a nominal substitution of Ti4+ is conceived, here it is found that Er3+ also incorporates at the (Bi,La)(3+) sites. These and other interesting concluding remarks from this work, including Er3+ tolerance, were possible only after comparing, especially, the X-ray diffraction results and the intrinsic ferroelectric characteristics extracted from the dielectric measurements. (C) 2011 Elsevier B.V. All rights reserved.FAPESPFAPESPCNPqCNP
Fluoride-modified electrical properties of lead borate glasses and electrochemically induced crystallization in the glassy state
Lead fluoroborate glasses were prepared by the melt-quenching technique and characterized in terms of (micro)structural and electrical properties. The study was conducted on as prepared as well as temperature- and/or electric field-treated glass samples. The results show that, in the as-prepared glassy-state materials, electrical conductivity improved with increasing the PbF(2) glass content. This result involves both an increase of the fluoride charge carrier density and, especially, a decrease of the activation energy from a glass structure expansion improving charge carrier mobility. Moreover, for the electric field-treated glass samples, surface crystallization was observed even below the glass transition temperature. As previously proposed in literature, and shown here, the occurrence of this phenomenon arose from an electrochemically induced redox reaction at the electrodes, followed by crystallite nucleation. Once nucleated, growth of beta-PbF(2) crystallites, with the indication of incorporating reduced lead ions (Pb(+)), was both (micro)structurally and electrically detectable and analyzed. The overall crystallization-associated features observed here adapt well with the floppy-rigid model that has been proposed to further complete the original continuous-random-network model by Zachariasen for closely addressing not only glasses' structure but also crystallization mechanism. Finally, the crystallization-modified kinetic picture of the glasses' electrical properties, through application of polarization/depolarization measurements originally combined with impedance spectroscopy, was extensively explored. (c) 2008 American Institute of Physics
Magnetoelectric coupling in lead-free piezoelectric Lix(K0.5Na0.5)1 − xNb1 − yTayO3 and magnetostrictive CoFe2O4 laminated composites
To replace lead zirconium titanate in magnetoelectric (ME) composites owing to concerns regarding its toxicity, we investigate the ME coupling in bilayer composites comprising lead-free Lix(K0.5Na0.5)1 − xNb1 − yTayO3 (LKNNT) (piezoelectric) and CoFe2O4 (magnetostrictive) phases. We prepare the LKNNT ceramics and measure its piezoelectric coefficient d31, a crucial ingredient determining ME couplings, for several Li (x = 0.03, 0.035, 0.04) and Ta (y = 0.15, 0.2, 0.25) concentrations, and find that the highest d31 occurs at y = 0.2 for all the values of x studied here. We then evaluate both the transverse (αE,31) and the longitudinal (αE,33) low-frequency ME coupling coefficients of our composites, for each the above composition of (x, y). At x = 0.03, we find the usual scenario of αE,31 and αE,33, i.e., the strongest ME coupling occurs when d31 is maximal, namely at y = 0.2. On the other hand, interestingly, we also obtain the strongest ME coupling when the LKNNT layer has a relatively weaker , e.g., at y = 0.25 for x = 0.035 and y = 0.15 for x = 0.04, following from the interplay of d31 and other ingredients (e.g., dielectric constant). Our calculated ME couplings, with αE,31 in magnitude around twice of αE,33, are comparable to those in lead-based composites. The effect of the volume fraction and interface parameter on the ME coupling is also discussed.This work was supported by CAPES, FAPESP (Grant #2013/00134-7), PRP/USP (Q-NANO), and Natural Science Foundation of China (Grant No. 11004120)