51 research outputs found

    Tannins, flavonoids and stilbenes in extracts of African savanna woodland trees Terminalia brownii, Terminalia laxiflora and Anogeissus leiocarpus showing promising antibacterial potential

    Get PDF
    Terminalia laxiflora, Terminalia brownii and Anogeissus leiocarpus are used as decoctions, macerations, infusions and fumigations in East and West African traditional medicine for treatment of infectious diseases and their symptoms. Using this ethnopharmacological information as a guideline for our research and owing to the fact that these species have not been subjected to in depth antibacterial and phytochemical studies, thirty-nine extracts of various polarities of the stem bark, stem wood and roots were studied for growth inhibitory effects against the human pathogenic bacteria Staphylococcus epidermidis, Staphylococcus aureus, Micrococcus luteus and Pseudomonas aeruginosa. Our results indicate that the studied species contain antibacterial compounds of a wide range of polarities. All polar root extracts of T. laxiflora and various polar extracts of T. brownii roots, including hot water decoctions, gave broad-spectrum antibacterial effects and low MIC values of 39 mu g/ml. The main ellagitannins in an ethyl acetate extract of the root of T. laxiflora were found to be corilagin and its derivative and punicalagin. A methanol extract of the roots of T. brownii contained methyl-(S)-flavogallonate and its derivative as the main identified ellagitannins. Moreover, both Terminalia species were found to contain ellagic acid xylopyranoside and methyl ellagic acid xyloside and pure ellagic acid was present in T. brownii. Pure punicalagin did not give as low MIC as an ethyl acetate extract of the roots of T. laxiflora, containing punicalagin as one of its main compounds, although this ellagitannin totally inhibited the growth of S. aureus at 125 mu g/ml and P. aeruginosa at 500 mu g/ml. Similarly, pure ellagic and gallic acid gave higher MIC values than the methanolic root extract of T. brownii against S. aureus and P. aeruginosa. Moreover, a Sephadex LH-20 fraction of the methanolic extract of the roots of T. brownii, enrichedwithmethyl-(S)-flavogallonate and its isomer, gave higher MIC values than the crude methanolic extract. These results suggest that the polyphenols in the extracts might act synergistically with each other. A methanolic soxhlet extract of the roots of A. leiocarpus, containing ampelopsin, aromadendrin, taxifolin, pinosylvin and 4'-methylpinosylvin gave a low MIC value of 39 mu g/ml against all bacterial strains used in this investigation. Our results demonstrate that the roots, stem bark and stem wood of T. brownii, T. laxiflora and A. leiocarpus are rich sources of (new) antimicrobial compounds and justify the uses of these plants for treatment of infections in African traditional medicine.Peer reviewe

    LC-MS/MS Tandem Mass Spectrometry for Analysis of Phenolic Compounds and Pentacyclic Triterpenes in Antifungal Extracts of Terminalia brownii (Fresen)

    Get PDF
    Decoctions and macerations of the stem bark and wood of Terminalia brownii Fresen. are used in traditional medicine for fungal infections and as fungicides on field crops and in traditional granaries in Sudan. In addition, T. brownii water extracts are commonly used as sprays for protecting wooden houses and furniture. Therefore, using agar disc diffusion and macrodilution methods, eight extracts of various polarities from the stem wood and bark were screened for their growth-inhibitory effects against filamentous fungi commonly causing fruit, vegetable, grain and wood decay, as well as infections in the immunocompromised host. Ethyl acetate extracts of the stem wood and bark gave the best antifungal activities, with MIC values of 250 ug/mL against Nattrassia mangiferae and Fusarium verticillioides, and 500 ug/mL against Aspergillus niger and Aspergillus flavus. Aqueous extracts gave almost as potent effects as the ethyl acetate extracts against the Aspergillus and Fusarium strains, and were slightly more active than the ethyl acetate extracts against Nattrassia mangiferae. Thin layer chromatography, RP-HPLC-DAD and tandem mass spectrometry (LC-MS/MS), were employed to identify the chemical constituents in the ethyl acetate fractions of the stem bark and wood. The stem bark and wood were found to have a similar qualitative composition of polyphenols and triterpenoids, but differed quantitatively from each other. The stilbene derivatives, cis- (3) and trans- resveratrol-3-O-b-galloylglucoside (4), were identified for the first time in T. brownii. Moreover, methyl-(S)-flavogallonate (5), quercetin-7-b-O-di-glucoside (8), quercetin-7-O-galloyl-glucoside (10), naringenin-40-methoxy-7-pyranoside (7), 5,6-dihydroxy-30,40,7-tri-methoxy flavone (12), gallagic acid dilactone (terminalin) (6), a corilagin derivative (9) and two oleanane type triterpenoids (1) and (2) were characterized. The flavonoids, a corilagin derivative and terminalin, have not been identified before in T. brownii. We reported earlier on the occurrence of methyl-S-flavogallonate and its isomer in the roots of T. brownii, but this is the first report on their occurrence in the stem wood as well. Our results justify the traditional uses of macerations and decoctions of T. brownii stem wood and bark for crop and wood protection and demonstrate that standardized extracts could have uses for the eco-friendly control of plant pathogenic fungi in African agroforestry systems. Likewise, our results justify the traditional uses of these preparations for the treatment of skin infections caused by filamentous fungi.Peer reviewe

    Effects of Acacia seyal and biochar on soil properties and sorghum yield in agroforestry systems in South Sudan

    Get PDF
    We studied the effects of Acacia seyal Del. intercropping and biochar soil amendment on soil physico-chemical properties and sorghum (Sorghum bicolor L.) yields in a two-year field experiment conducted on a silt loam site near Renk in South Sudan. A split-plot design with three replications was used. The main factor was tree-cropping system (dense acacia + sorghum, scattered acacia + sorghum, and sole sorghum) and biochar (0 and 10 Mg ha(-1)) was the subplot factor. The two acacia systems had lower soil pH, N and higher C/N ratios compared to the sole sorghum system. Biochar significantly increased soil C, exchangeable K+ contents, field capacity and available water content, but reduced soil exchangeable Ca2+ and effective CEC, and had no effect on soil pH. Acacia intercropping significantly reduced sorghum grain yields while biochar had no significant effect on sorghum yields. The land equivalent ratio (LER) for sorghum yield was 0.3 for both acacia systems in 2011, with or without biochar, but increased in 2012 to 0.6 for the scattered acacia system when combined with biochar. The reduction in sorghum yields by the A. seyal trees was probably due to a combination of competition for water and nutrients and shading. The lack of a yield response to biochar maybe due to insufficient time or too low a dosage. Further research is needed to test for the effects of tree intercropping and biochar and their interactions on soil properties and crop yields in drylands.Peer reviewe

    The effect of hydrodynamic conditions on the selective flotation of fully liberated low grade copper-nickel ore

    No full text
    Abstract Low grade sulfide ores are difficult to process due to their composite mineralogy and their fine grained dissemination with gangue minerals. Therefore, fine grinding of such ores becomes essential to liberate valuable minerals. In this research, selective flotation was carried out using two pitched blade turbine impellers with diameters of 6 cm and 7 cm to float copper and nickel. The main focus of this research was to generate optimum hydrodynamic conditions that can effectively separate nickel and copper from gangue minerals. In addition, we investigated the effects of superficial gas velocity, impeller speed, bubble size distribution, and bubble surface area flux on the flotation recovery and rate constant. The results demonstrated that a 7 cm impeller comparatively produced optimum hydrodynamic conditions that improved Cu-Ni recovery and the rate constant. The maximum copper and nickel recoveries in the 7 cm impeller tests were observed at 93.1% and 72.5%, respectively. However, a significant decrease in the flotation rate of nickel was observed, due to entrainment of nickel in copper concentrate and the slime coating of gangue minerals on the nickel particle surfaces

    Technoeconomic analysis report Baseline

    No full text
    Centro de Informacion y Documentacion Cientifica (CINDOC). C/Joaquin Costa, 22. 28002 Madrid. SPAIN / CINDOC - Centro de Informaciòn y Documentaciòn CientìficaSIGLEESSpai

    Properties of flash roasted products from low-grade refractory iron tailings and improvement method for their magnetic separation index

    No full text
    Abstract The properties of flash-roasted products from low-grade refractory iron tailings (IGRIT) and the improved method for their magnetic separation index were investigated by the MLA, XRD, iron phase analysis, and magnetic separation test. The results show the siderite and hematite in the IGRIT have been converted to magnetic iron after the flash roasting treatment with a time of 3‐5 s; magnetic iron in roasted products has a monomeric dissociation of 37.20%, and a 75‐100% exposed area of contiguous bodies as rich intergrowth was 29.83%, and that a 32.97 poor intergrowth; moreover, magnetic iron is mainly associated with muscovite and quartz. It is also found that the regrinding-magnetic separation (1500 Oe) treatment of the middling was beneficial to obtain more qualified iron concentrate products. Therefore, roasted products magnetic separation process in the absence/ presence of the middling regrinding-magnetic separation treatment obtains an iron concentrate with 60.10%/ 60.12% iron grade and 72.04%/81.13% iron recovery. The iron concentrate from the magnetic separation process with middling regrinding-magnetic separation can have a 9% higher recovery than the process without middling regrinding-magnetic separation. The work is significant for helping to improve the utilization of IGRIT
    corecore