Status of the BELLE II Pixel Detector

The Belle II experiment at the super KEK B-factory (SuperKEKB) in Tsukuba, Japan, has been collecting $e^+e^−$ collision data since March 2019. Operating at a record-breaking luminosity of up to $4.7×10^{34} cm^{−2}s^{−1}$, data corresponding to $424 fb^{−1}$ has since been recorded. The Belle II VerteX Detector (VXD) is central to the Belle II detector and its physics program and plays a crucial role in reconstructing precise primary and decay vertices. It consists of the outer 4-layer Silicon Vertex Detector (SVD) using double sided silicon strips and the inner two-layer PiXel Detector (PXD) based on the Depleted P-channel Field Effect Transistor (DePFET) technology. The PXD DePFET structure combines signal generation and amplification within pixels with a minimum pitch of $(50×55) μm^2$. A high gain and a high signal-to-noise ratio allow thinning the pixels to $75 μm$ while retaining a high pixel hit efficiency of about $99$. As a consequence, also the material budget of the full detector is kept low at $≈0.21$$\frac{X}{X_0}$ per layer in the acceptance region. This also includes contributions from the control, Analog-to-Digital Converter (ADC), and data processing Application Specific Integrated Circuits (ASICs) as well as from cooling and support structures. This article will present the experience gained from four years of operating PXD; the first full scale detector employing the DePFET technology in High Energy Physics. Overall, the PXD has met the expectations. Operating in the intense SuperKEKB environment poses many challenges that will also be discussed. The current PXD system remains incomplete with only 20 out of 40 modules having been installed. A full replacement has been constructed and is currently in its final testing stage before it will be installed into Belle II during the ongoing long shutdown that will last throughout 2023

Study of forward Z + jet production in pp collisions at √s=7 TeV

A measurement of the $Z(\rightarrow\mu^+\mu^-)$+jet production cross-section in $pp$ collisions at a centre-of-mass energy $\sqrt{s} = 7$ TeV is presented. The analysis is based on an integrated luminosity of $1.0\,\text{fb}^{-1}$ recorded by the LHCb experiment. Results are shown with two jet transverse momentum thresholds, 10 and 20 GeV, for both the overall cross-section within the fiducial volume, and for six differential cross-section measurements. The fiducial volume requires that both the jet and the muons from the Z boson decay are produced in the forward direction ($2.0<\eta<4.5$). The results show good agreement with theoretical predictions at the second-order expansion in the coupling of the strong interaction.A measurement of the $Z(\rightarrow\mu^+\mu^-)$+jet production cross-section in $pp$ collisions at a centre-of-mass energy $\sqrt{s} = 7$ TeV is presented. The analysis is based on an integrated luminosity of $1.0\,\text{fb}^{-1}$ recorded by the LHCb experiment. Results are shown with two jet transverse momentum thresholds, 10 and 20 GeV, for both the overall cross-section within the fiducial volume, and for six differential cross-section measurements. The fiducial volume requires that both the jet and the muons from the Z boson decay are produced in the forward direction ($2.0<\eta<4.5$). The results show good agreement with theoretical predictions at the second-order expansion in the coupling of the strong interaction

Studies with Onia at LHCb

Proceedings of the DPF-2011 Conference, Providence, RI, August 8-13, 2011, 8 pagesInternational audienceThe production of c c_bar and b b_bar is studied in pp collisions at sqrt(s) = 7 TeV with the LHCb detector. The results of these measurements are compared with different theoretical models. Results and prospects are also shown for exotics: the mass measurement of the X(3872) and the search of the X(4140). Most of the presented results are based on the 2010 LHCb dataset (35 pb-1)

Measurement of branching fractions of Λc+→pKS0KS0\Lambda_c^+\to{}pK_S^0K_S^0 and Λc+→pKS0η\Lambda_c^+\to{}pK_S^0\eta at Belle

We present a study of a singly Cabibbo-suppressed decay $\Lambda_c^+\to{}pK_S^0K_S^0$ and a Cabibbo-favored decay $\Lambda_c^+\to{}pK_S^0\eta$ based on 980 $\rm fb^{-1}$ of data collected by the Belle detector, operating at the KEKB energy-asymmetric $e^+e^-$ collider. We measure their branching fractions relative to $\Lambda_c^+\to{}pK_S^0$: $\mathcal{B}(\Lambda_c^+\to{}pK_S^0K_S^0)/\mathcal{B}(\Lambda_c^+\to{}pK_S^0)={(1.48 \pm 0.08 \pm 0.04)\times 10^{-2}}$ and $\mathcal{B}(\Lambda_c^+\to{}pK_S^0\eta)/\mathcal{B}(\Lambda_c^+\to{}pK_S^0)={(2.73\pm 0.06\pm 0.13)\times 10^{-1}}$. Combining with the world average $\mathcal{B}(\Lambda_c^+\to{}pK_S^0)$, we have the absolute branching fractions: $\mathcal{B}(\Lambda_c^+\to{}pK_S^0K_S^0) = {(2.35\pm 0.12\pm 0.07 \pm 0.12 )\times 10^{-4}}$ and $\mathcal{B}(\Lambda_c^+\to{}pK_S^0\eta) = {(4.35\pm 0.10\pm 0.20 \pm 0.22 )\times 10^{-3}}$. The first and second uncertainties are statistical and systematic, respectively, while the third ones arise from the uncertainty on $\mathcal{B}(\Lambda_c^+\to{}pK_S^0)$. The mode $\Lambda_c^+\to{}pK_S^0K_S^0$ is observed for the first time and has a statistical significance of $>\!10\sigma$. The branching fraction of $\Lambda_c^+\to{}pK_S^0\eta$ has been measured with a threefold improvement in precision over previous results and is found to be consistent with the world average

Measurement of the branching fractions for Cabibbo-suppressed decays D+→K+K−π+π0D^{+}\to K^{+} K^{-}\pi^{+}\pi^{0} and D(s)+→K+π−π+π0D_{(s)}^{+}\to K^{+}\pi^{-}\pi^{+}\pi^{0} at Belle

International audienceWe present measurements of the branching fractions for the singly Cabibbo-suppressed decays $D^+\to K^{+}K^{-}\pi^{+}\pi^{0}$ and $D_s^{+}\to K^{+}\pi^{-}\pi^{+}\pi^{0}$, and the doubly Cabibbo-suppressed decay $D^{+}\to K^{+}\pi^{-}\pi^{+}\pi^{0}$, based on 980 ${\rm fb}^{-1}$ of data recorded by the Belle experiment at the KEKB $e^{+}e^{-}$ collider. We measure these modes relative to the Cabibbo-favored modes $D^{+}\to K^{-}\pi^{+}\pi^{+}\pi^{0}$ and $D_s^{+}\to K^{+}K^{-}\pi^{+}\pi^{0}$. Our results for the ratios of branching fractions are $B(D^{+}\to K^{+}K^{-}\pi^{+}\pi^{0})/B(D^{+}\to K^{-}\pi^{+}\pi^{+}\pi^{0}) = (11.32 \pm 0.13 \pm 0.26)\%$, $B(D^{+}\to K^{+}\pi^{-}\pi^{+}\pi^{0})/B(D^{+}\to K^{-}\pi^{+}\pi^{+}\pi^{0}) = (1.68 \pm 0.11\pm 0.03)\%$, and $B(D_s^{+}\to K^{+}\pi^{-}\pi^{+}\pi^{0})/B(D_s^{+}\to K^{+}K^{-}\pi^{+}\pi^{0}) = (17.13 \pm 0.62 \pm 0.51)\%$, where the uncertainties are statistical and systematic, respectively. The second value corresponds to $(5.83\pm 0.42)\times\tan^4\theta_C$, where $\theta_C$ is the Cabibbo angle; this value is larger than other measured ratios of branching fractions for a doubly Cabibbo-suppressed charm decay to a Cabibbo-favored decay. Multiplying these results by world average values for $B(D^{+}\to K^{-}\pi^{+}\pi^{+}\pi^{0})$ and $B(D_s^{+}\to K^{+}K^{-}\pi^{+}\pi^{0})$ yields $B(D^{+}\to K^{+}K^{-}\pi^{+}\pi^{0})= (7.08\pm 0.08\pm 0.16\pm 0.20)\times10^{-3}$, $B(D^{+}\to K^{+}\pi^{-}\pi^{+}\pi^{0})= (1.05\pm 0.07\pm 0.02\pm 0.03)\times10^{-3}$, and $B(D_s^{+}\to K^{+}\pi^{-}\pi^{+}\pi^{0}) = (9.44\pm 0.34\pm 0.28\pm 0.32)\times10^{-3}$, where the third uncertainty is due to the branching fraction of the normalization mode. The first two results are consistent with, but more precise than, the current world averages. The last result is the first measurement of this branching fraction

Data quality monitors of vertex detectors at the start of the Belle II experiment

The Belle II experiment features a substantial upgrade of the Belle detector and will operate at the SuperKEKB energy-asymmetric e+e− collider at KEK in Tsukuba, Japan. The accelerator completed its first phase of commissioning in 2016, and the Belle II detector saw its first electron-positron collisions in April 2018. Belle II features a newly designed silicon vertex detector based on double-sided strip layers and DEPFET pixel layers. A subset of the vertex detector was operated in 2018 to determine background conditions (Phase 2 operation). The collaboration completed full detector installation in January 2019, and the experiment started full data taking. This paper will report on the final arrangement of the silicon vertex detector part of Belle II with a focus on online monitoring of detector conditions and data quality, on the design and use of diagnostic and reference plots, and on integration with the software framework of Belle II. Data quality monitoring plots will be discussed with a focus on simulation and acquired cosmic and collision data