Nitride coating enhances endothelialization on biomedical NiTi shape memory alloy

International audienceSurface nitriding was demonstrated to be an effective process for improving the biocompatibility of implantable devices. In this study, we investigated the benefits of nitriding the NiTi shape memory alloy for vascular stent applications. Results from cell experiments indicated that, compared to untreated NiTi, a superficial gas nitriding treatment enhanced the adhesion of human umbilical vein endothelial cells (HUVECs), cell spreading and proliferation. This investigation provides data to demonstrate the possibility of improving the rate of endothelialization on NiTi by means of nitride coating

Biomimetic nanocrystalline apatite coatings synthesized by Matrix Assisted Pulsed Laser Evaporation for medical applications

tWe report the deposition by Matrix Assisted Pulsed Laser Evaporation (MAPLE) technique of biomimeticnanocrystalline apatite coatings on titanium substrates, with potential application in tissue engineering.The targets were prepared from metastable, nanometric, poorly crystalline apatite powders, analogousto mineral bone, synthesized through a biomimetic approach by double decomposition process. For thedeposition of thin films, a KrF* excimer laser source was used (λ = 248 nm, τFWHM ≤ 25 ns). The analy-ses revealed the existence, in synthesized powders, of labile non-apatitic mineral ions, associated withthe formation of a hydrated layer at the surface of the nanocrystals. The thin film analyses showedthat the structural and chemical nature of the nanocrystalline apatite was prevalently preserved. Theperpetuation of the non-apatitic environments was also observed. The study indicated that MAPLE isa suitable technique for the congruent transfer of a delicate material, such as the biomimetic hydratednanohydroxyapatite

Combinatorial MAPLE deposition of antimicrobial orthopedic maps fabricated from chitosan and biomimetic apatite powders

Chitosan/biomimetic apatite thin films were grown in mild conditions of temperature and pressure by Combinatorial Matrix-Assisted Pulsed Laser Evaporation on Ti, Si or glass substrates. Compositional gradients were obtained by simultaneous laser vaporization of the two distinct material targets. A KrF* excimer (λ=248nm, τFWHM=25ns) laser source was used in all experiments. The nature and surface composition of deposited materials and the spatial distribution of constituents were studied by SEM, EDS, AFM, GIXRD, FTIR, micro-Raman, and XPS. The antimicrobial efficiency of the chitosan/biomimetic apatite layers against Staphylococcus aureus and Escherichia coli strains was interrogated by viable cell count assay. The obtained thin films were XRD amorphous and exhibited a morphology characteristic to the laser deposited structures composed of nanometric round shaped grains. The surface roughness has progressively increased with chitosan concentration. FTIR, EDS and XPS analyses indicated that the composition of the BmAp-CHT C-MAPLE composite films gradually modified from pure apatite to chitosan. The bioevaluation tests indicated that S. aureus biofilm is more susceptible to the action of chitosan-rich areas of the films, whilst the E. coli biofilm proved more sensible to areas containing less chitosan. The best compromise should therefore go, in our opinion, to zones with intermediate-to-high chitosan concentration which can assure a large spectrum of antimicrobial protection concomitantly with a significant enhancement of osseointegration, favored by the presence of biomimetic hydroxyapatite

3D Biomimetic Magnetic Structures for Static Magnetic Field Stimulation of Osteogenesis

We designed, fabricated and optimized 3D biomimetic magnetic structures that stimulate the osteogenesis in static magnetic fields. The structures were fabricated by direct laser writing via two-photon polymerization of IP-L780 photopolymer and were based on ellipsoidal, hexagonal units organized in a multilayered architecture. The magnetic activity of the structures was assured by coating with a thin layer of collagen-chitosan-hydroxyapatite-magnetic nanoparticles composite. In vitro experiments using MG-63 osteoblast-like cells for 3D structures with gradients of pore size helped us to find an optimum pore size between 20–40 µm. Starting from optimized 3D structures, we evaluated both qualitatively and quantitatively the effects of static magnetic fields of up to 250 mT on cell proliferation and differentiation, by ALP (alkaline phosphatase) production, Alizarin Red and osteocalcin secretion measurements. We demonstrated that the synergic effect of 3D structure optimization and static magnetic stimulation enhances the bone regeneration by a factor greater than 2 as compared with the same structure in the absence of a magnetic field

Laser ablation and LIPSS formation at static and dynamic multi-pulse regime on protective Al2O3/TiAlN coating

The study of ablation and the laser-induced periodic surface structure (LIPSS) creation during the static and dynamic ultrafast laser (UFL) processing of the Al2O3/TiAlN protective coating is reported. The static irradiation was done with 10 successive pulses while scanning irradiation was performed with sample scanning. The laser ablation was studied by analysis of the surface morphology and elemental composition. The selective ablations manifest as circular craters or lines/micro-channels. The borders are very sharp without debris and hydrodynamic features. LIPSSs were formed at the bottoms of craters and microchannels. The periodicity of the created LIPSSs has shown a trend of increase with the pulse energy. Depending on the applied laser fuence the elemental composition in the centre of the craters confrmed the complete removal of the Al2O3 layer and partial ablation of the second TiAlN. The Al2O3 layer and part of TiAlN were ablated in micro-channels too

Raman Spectroscopy: In Vivo Application for Bone Evaluation in Oral Reconstructive (Regenerative) Surgery

The aim of this study was to evaluate the quality of the bone, revealing the different phases for calcified tissues independent of the medical history of the patient in relation to periodontitis by means of in vivo Raman spectroscopy. Raman spectroscopy measurements were performed in vivo during surgery and then ex vivo for the harvested bone samples for the whole group of patients (ten patients). The specific peaks for the Raman spectrum were traced for reference compounds (e.g., calcium phosphates) and bone samples. The variation in the intensity of the spectrum in relation to the specific bone constituents’ concentrations reflects the bone quality and can be strongly related with patient medical status (before dental surgery and after a healing period). Moreover, bone sample fluorescence is related to collagen content, enabling a complete evaluation of bone quality including a “quasi-quantification” of the healing process similar to the bone augmentation procedure. A complete evaluation of the processed spectra offers quantitative/qualitative information on the condition of the bone tissue. We conclude that Raman spectroscopy can be considered a viable investigation method for an in vivo and quick bone quality assessment during oral and periodontal surgery

The corrosion and bioactivity behavior of SiC doped hydroxyapatite for dental applications

Hydroxyapatite (HAP) coatings are commonly used to improve the bioactivity of Ti alloy used for orthopedic or dental implants. Recently, in order to decrease the dissolution rate and to improve the mechanical and anticorrosive properties, as well as the osseointegration of the HAP coated titanium alloy, the addition of different elements (Si or Ti) into HAP films was proposed