756 research outputs found
Migration of polypropylene oligomers into ready-to-eat vegetable soups
Polyolefin oligomeric hydrocarbons (POH) are non-intentionally added substances (NIAS) which mainly reside in the polymer (PE, PP) as a consequence of the polymerization process, and that under favorable conditions (high fat content, high temperature, and long contact time) may migrate at high amount from the packaging into the food. The food industry offers a wide range of ready-to-eat products, among these, vegetable soups designed to be stored at refrigeration temperature (for times around 6 weeks), and in most cases to be heated for a few minutes in a microwave oven (into the original container, mostly of PP) before consumption. The present work aimed to study for the first-time migration of POH during the shelf life of these products, including storage at refrigeration temperature and after microwave heating. On-line high-performance liquid chromatography (HPLC)-gas chromatography (GC), followed by flame ionization detection (FID), was applied for POH analysis in a number of ready-to-eat products purchased from the Italian market. Microwave heating determined a variable POH increase ranging from 0.1 to 6.2 mg/kg. Parameters possibly affecting migration such as fat content and heating time were also studied
Measurement of Gust Response on a Turbine Cascade
The paper presents benchmark experimental data on a gust response of an annular turbine cascade. The experiment was particularly designed to provide data for comparison with the results of a typical linearized gust-response analysis. Reduced frequency, Mach number, and incidence were varied independently. Except for the lowest reduced frequency, the gust velocity distribution was nearly sinusoidal. For the high inlet-velocity series of tests, the cascade was near choking. The mean flow was documented by measuring blade surface pressures and the cascade exit flow. High-response pressure transducers were used to measure the unsteady pressure distribution. Inlet-velocity components and turbulence parameters were measured using hot wire. In addition to the synchronous time-average pressure spectra, typical power spectra are included for several representative conditions
Effect of different oleogelators on lipolysis and curcuminoid bioaccessibility upon in vitro digestion of sunflower oil oleogels
Sunflower oil enriched with curcuminoid compounds (CUs) was gelled by adding 5% (w/w) saturated monoglycerides (MG), rice bran waxes (RW) or a mixture of \u3b2-sitosterol and \u3b3-oryzanol (PS). The resulting oleogels differed for rheological properties and firmness due to the difference in gel network structure. PS oleogel was the firmest sample followed by RW and MG ones. Upon in vitro digestion, fatty acid release as a function of digestion time was greatly affected by oleogel structure: the extent of lipolysis decreased as oleogel strength increased (PS < RW < MG). On the other hand, the nature of the oleogelator affected CUs bioaccessibility, which was lower in oleogels containing crystalline particles (MG and RW). These findings appear interesting in the attempt to develop oleogels able to control lipid digestion as well as to deliver bioactive molecules in food systems
Microwave-based technique for fast and reliable extraction of organic contaminants from food, with a special focus on hydrocarbon contaminants
Due to food complexity and the low amount at which contaminants are usually present in food, their analytical determination can be particularly challenging. Conventional sample preparation methods making use of large solvent volumes and involving intensive sample manipulation can lead to sample contamination or losses of analytes. To overcome the disadvantages of conventional sample preparation, many researchers put their efforts toward the development of rapid and environmental-friendly methods, minimizing solvent consumption. In this context, microwave-assisted-extraction (MAE) has obtained, over the last years, increasing attention from analytical chemists and it has been successfully utilized for the extraction of various contaminants from different foods. In the first part of this review, an updated overview of the microwave-based extraction technique used for rapid and efficient extraction of organic contaminants from food is given. The principle of the technique, a description of available instrumentation, optimization of parameters affecting the extraction yield, as well as integrated techniques for further purification/enrichment prior to the analytical determination, are illustrated. In the second part of the review, the latest applications concerning the use of microwave energy for the determination of hydrocarbon contaminants-namely polycyclic aromatic hydrocarbons (PAHs) and mineral oil hydrocarbons (MOH)-are reported and critically overviewed and future trends are delineated
Effect of the refining process on total hydroxytyrosol, tyrosol, and tocopherol contents of olive oil
The impact of the olive oil refining process on major antioxidant compound levels was evaluated by means of UHPLC analysis of lampante olive oils collected at different stages of the refining procedure (degumming, chemical and physical flash neutralization, bleaching, and deodorization). For this purpose, the evolution of the tocopherol fraction was investigated by means of the UHPLC-FL method, while the influence of the refining process on the total hydrolyzed phenolic content was assessed by measuring hydroxytyrosol and tyrosol levels after acid hydrolysis of the phenolic extracts. Refining was found to have a marked effect on total hydroxytyrosol and tyrosol contents, as they are completely removed in the early steps of the refining procedure. In contrast, the variation trends of tocopherols are not always clear-cut, and significant decreases in content from 7% to 16% were only revealed during refining in four out of nine samples. In addition, five of the nine refined oils showed final tocopherol concentrations higher than 200 mg/kg, the limit imposed by international standards regarding the content of such compounds in commercial olive oils. This study supports the need for a revision of the International Olive Oil Council (IOC) standard relative to the limit established for tocopherol addition to refined oils to avoid possible legal and economic trade issues
Temperature dependence of oxidation kinetics of extra virgin olive oil (EVOO) and shelf-life prediction
Producers have to guarantee the extra virgin olive oil (EVOO) quality characteristics reported in the Regulation (CEE) 2568/91 throughout the product shelf-life (SL). Unfortunately, due to the development of oxidative reactions, some quality indices change during storage leading to a progressive deterioration of EVOO quality. To avoid the risk of product downgrading in the virgin oil category, the development of effective shelf-life prediction models is extremely important for the olive oil industry. In this research, the accelerated shelf-life testing (ASLT) protocol was applied to evaluate the temperature dependence of selected oxidation indexes as well as to develop a shelf-life predictive model. The evolution of conventional (peroxide value, K232, K270, polyphenols, tocopherols and hexanal) and unconventional parameters (conjugated trienes and pyropheophytin a) was monitored in bottled EVOO stored in the dark at increasing temperature (25, 40, 50 and 60 \ub0C). Accordingly, for well-packed products with reduced oxygen in headspace, the best shelf-life index allowing the ability to predict EVOO SL turned out to be K270. In addition, pyropheophytin a (%) has been shown to be more sensitive to temperature changes than the secondary oxidation indices, thus suggesting its use as a freshness indicator for storage temperatures higher than 25 \ub0C
New trends in fast liquid chromatography for food and environmental analysis
There is an increasing need for applications in food and environmental areas able to cope with a large number of analytes in very complex matrices. The new analytical procedures demand sensitivity, robustness and high resolution within an acceptable analysis time. The purpose of this review is to describe new trends based on fast liquid chromatography applied to the food and environmental analysis. It includes different column technologies, such as monolithic, sub-2 m, porous shell, as well as different stationary phases such as reversed phase (C8 and C18), hydrophilic interaction liquid chromatography (HILIC) and fluorinated columns. Additionally, recent sample extraction and clean-up methodologies applied to reduce sample manipulation and total analysis time in food and environmental analysis - QuEChERS (Quick, Easy, Cheap, Effective, Rugged and Safe), on line solid phase extraction coupled to ultrahigh pressure liquid chromatography (on line SPE-UHPLC), turbulent flow chromatography (TFC) and molecularly imprinted polymers (MIPs), were also addressed. The advantages and drawbacks of these methodologies applied to the fast and sensitive analyses of food and environmental samples are going to be discussed
Occurrence of n-Alkanes in vegetable oils and their analytical determination
Vegetable oils contain endogenous linear hydrocarbons, namely n-alkanes, ranging from n-C21 to n-C35 with odd chain lengths prevalent. Different vegetable oils, as well as oils of the same type, but of different variety and provenience, show typical n-alkane patterns, which could be used as a fingerprint to characterize them. In the first part of this review, data on the occurrence of n-alkanes in different vegetable oils (total and predominant n-alkanes) are given, with a focus on obtaining information regarding variety and geographical origin. The second part aims to provide the state of the art on available analytical methods for their determination. In particular, a detailed description of the sample preparation protocols and analytical determination is reported, pointing out the main drawbacks of traditional sample preparation and possible solutions to implement the analysis with the aim to shift toward rapid and solvent-sparing methods
Impact of mild oven cooking treatments on carotenoids and tocopherols of cheddar and depurple cauliflower (Brassica oleracea L. var. Botrytis)
The effect of steam and sous-vide oven procedures on liposoluble antioxidants of colored cauliflower (orange and purple) was assessed for the first time and compared with domestic practice (boiling). In raw samples, the total carotenoid content was 10-fold higher in Cheddar than in Depurple (20.9 \ub1 2.1 vs. 2.3 \ub1 0.5 mg/kg dry weight), whereas the level of tocopherols was similar (28.5 \ub1 4.4 vs. 33 \ub1 5.2 mg/kg dry weight). The Cheddar liposoluble antioxidant matter contained violaxanthin, neoxanthin, \u3b1-carotene and \u3b4-tocopherol, not detected in Depurple. All tests increased the bioactive compounds extractability with steam oven and sous-vide displaying similar effects, lower than boiling. In boiled Cheddar cauliflower, the total carotenoids and tocopherols contents increased with cooking time until they were 13-fold and 6-fold more than in raw cauliflower, respectively. Conversely, in the Depurple variety, contents increased by half with respect to the orange variety. However, from a nutritional point of view, no differences were revealed among the three different cooking treatments in terms of vitamin A and E levels expressed in \u3bcg/100 g of fresh vegetable because of the higher water content of boiled samples that must be considered when evaluating the effect of thermal treatment on cauliflower nutritional traits
Prevalence and pharmacologic management of familial hypercholesterolemia in an unselected contemporary cohort of patients with stable coronary artery disease
INTRODUCTION:
Familial hypercholesterolemia (FH) is an inherited disorder characterized by elevated plasma levels of low-density lipoprotein cholesterol (LDL-C) associated with premature cardiovascular disease.
METHODS:
Using the data from the START (STable Coronary Artery Diseases RegisTry) study, a nationwide, prospective survey on patients with stable coronary artery disease (CAD), we described prevalence and lipid lowering strategies commonly employed in these patients. The study population was divided into "definite/probable FH," defined as a Dutch Lipid Clinic Network (DLCN) score ≥6, "possible FH" with DLCN 3-5, and "unlikely FH" in presence of a DLCN <3.
RESULTS:
Among the 4030 patients with the DLCN score available, 132 (3.3%) were classified as FH (2.3% with definite/probable and 1.0% with possible FH) and 3898 (96.7%) had unlikely FH. Patients with both definite/probable and possible FH were younger compared to patients not presenting FH. Mean on-treatment LDL-C levels were 107.8 ± 41.5, 84.4 ± 40.9, and 85.8 ± 32.3 (P < 0.0001) and a target of ≤70 mg/dL was reached in 10.9%, 30.0%, and 22.0% (P < 0.0001) of patents with definite/probable, possible FH, and unlikely FH, respectively. Statin therapy was prescribed in 85 (92.4%) patients with definite/probable FH, in 38 (95.0%) with possible FH, and in 3621 (92.9%) with unlikely FH (P = 0.86). The association of statin and ezetimibe, in absence of other lipid-lowering therapy, was more frequently used in patients with definite/probable FH compared to patients without FH (31.5% vs 17.5% vs 9.5%; P < 0.0001).
CONCLUSIONS:
In this large cohort of consecutive patients with stable CAD, FH was highly prevalent and generally undertreated with lipid lowering therapies
- …