2,025 research outputs found
Aligning the CMS Muon Endcap Detector with a System of Optical Sensors
The positions and orientations of one sixth of 468 large cathode strip chambers in the endcaps of the CMS muon detector are directly monitored by several hundred sensors including 2-D optical sensors with linear CCDs illuminated by cross-hair lasers. Position measurements obtained by photogrammetry and survey under field-off conditions show that chambers in the +Z endcap have been placed on the yoke disks with an average accuracy of mm in all 3 dimensions. We reconstruct absolute Z positions and orientations of chambers at B=0T and B=4T using data from the optical alignment system. The measured position resolution and sensitivity to relative motion is about 60 . The precision for measuring chamber positions taking into account mechanical tolerances is \mbox{}. Comparing reconstruction of optical alignment data and photogrammetry measurements at B=0T indicates an accuracy of 680 currently achieved with the hardware alignment system. Optical position measurements at B=4T show significant chamber displacements of up to 13 mm due to yoke disk deformation
Design and Performance of the Alignment System for the CMS Muon Endcaps
The alignment system for the CMS Muon Endcap detector employs several hundred sensors such as optical 1-D CCD sensors illuminated by lasers and analog distance- and tilt-sensors to monitor the positions of one sixth of 468 large Cathode Strip Chambers. The chambers mounted on the endcap yoke disks undergo substantial deformation on the order of centimeters when the 4T field is switched on and off. The Muon Endcap alignment system is required to monitor chamber positions with \mbox{75-200 m} accuracy in the R plane, 400 m in the radial direction, and 1 mm in the z-direction along the beam axis. The complete alignment hardware for one of the two endcaps has been installed at CERN. A major system test was performed when the 4T solenoid magnet was ramped up to full field for the first time in August 2006. We present the overall system design and first results on disk deformations, which indicate that the measurements agree with expectations
Recommended from our members
Design and performance of the alignment system for the CMS muon endcaps
The alignment system for the CMS Muon Endcap detector employs several hundred sensors such as optical 1-D CCD sensors illuminated by lasers and analog distance- and tilt-sensors to monitor the positions of one sixth of 468 large Cathode Strip Chambers. The chambers mounted on the endcap yoke disks undergo substantial deformation on the order of centimeters when the 4T field is switched on and off. The Muon Endcap alignment system is required to monitor chamber positions with 75-200 {micro}m accuracy in the R? plane, {approx}400 {micro}m in the radial direction, and {approx}1 mm in the z-direction along the beam axis. The complete alignment hardware for one of the two endcaps has been installed at CERN. A major system test was performed when the 4T solenoid magnet was ramped up to full field for the first time in August 2006. We present the overall system design and first results on disk deformations, which indicate that the measurements agree with expectations
Results from a Fermilab neutrino beam dump experiment
The flux of prompt neutrinos from a beam dump has been measured in an experiment at the Fermi National Accelerator Laboratory (E613). Assuming that the charm production has a linear dependence on atomic number and varies as (1−‖×‖)5 e−2mT, a model dependent cross section of 27±5μb/nucleon can be derived. For neutrino energies greater than 20 GeV, the flux of electron neutrinos with respect to muon neutrinos is 0.78±0.19. For neutrinos with energy greater than 30 GeV and p⟂ greater than 0.2, the flux of ν̄u compared to νμ is 0.96±0.22.Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/87363/2/100_1.pd
Prompt Neutrino Results from Fermi Lab
Results from a Fermi lab experiment to study prompt neutrino production are presented. Assuming the prompt neutrinos come from the decay of charmed mesons we find a total DD production cross section of approx. 20 μb/nucleon, in good agreement with previous CERN results. We find a ν/ν ratio and a νe/νμ of approx. 1.0. The energy and pT spectra of the prompt neutrinos are consistent with those expected from DD production. Limits on the production of supersymmetric particles have also been obtained.Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/87356/2/262_1.pd
Measurement of inclusive D*+- and associated dijet cross sections in photoproduction at HERA
Inclusive photoproduction of D*+- mesons has been measured for photon-proton
centre-of-mass energies in the range 130 < W < 280 GeV and a photon virtuality
Q^2 < 1 GeV^2. The data sample used corresponds to an integrated luminosity of
37 pb^-1. Total and differential cross sections as functions of the D*
transverse momentum and pseudorapidity are presented in restricted kinematical
regions and the data are compared with next-to-leading order (NLO) perturbative
QCD calculations using the "massive charm" and "massless charm" schemes. The
measured cross sections are generally above the NLO calculations, in particular
in the forward (proton) direction. The large data sample also allows the study
of dijet production associated with charm. A significant resolved as well as a
direct photon component contribute to the cross section. Leading order QCD
Monte Carlo calculations indicate that the resolved contribution arises from a
significant charm component in the photon. A massive charm NLO parton level
calculation yields lower cross sections compared to the measured results in a
kinematic region where the resolved photon contribution is significant.Comment: 32 pages including 6 figure
Measurement of Jet Shapes in Photoproduction at HERA
The shape of jets produced in quasi-real photon-proton collisions at
centre-of-mass energies in the range GeV has been measured using the
hadronic energy flow. The measurement was done with the ZEUS detector at HERA.
Jets are identified using a cone algorithm in the plane with a
cone radius of one unit. Measured jet shapes both in inclusive jet and dijet
production with transverse energies GeV are presented. The jet
shape broadens as the jet pseudorapidity () increases and narrows
as increases. In dijet photoproduction, the jet shapes have been
measured separately for samples dominated by resolved and by direct processes.
Leading-logarithm parton-shower Monte Carlo calculations of resolved and direct
processes describe well the measured jet shapes except for the inclusive
production of jets with high and low . The observed
broadening of the jet shape as increases is consistent with the
predicted increase in the fraction of final state gluon jets.Comment: 29 pages including 9 figure
Efficiency of Finding Muon Track Trigger Primitives in CMS Cathode Strip Chambers
In the CMS Experiment, muon detection in the forward direction is accomplished by cathode strip chambers~(CSC). These detectors identify muons, provide a fast muon trigger, and give a precise measurement of the muon trajectory. There are 468 six-plane CSCs in the system. The efficiency of finding muon trigger primitives (muon track segments) was studied using~36 CMS CSCs and cosmic ray muons during the Magnet Test and Cosmic Challenge~(MTCC) exercise conducted by the~CMS experiment in~2006. In contrast to earlier studies that used muon beams to illuminate a very small chamber area (~m), results presented in this paper were obtained by many installed CSCs operating {\em in situ} over an area of ~m as a part of the~CMS experiment. The efficiency of finding 2-dimensional trigger primitives within 6-layer chambers was found to be~. These segments, found by the CSC electronics within ~ns after the passing of a muon through the chambers, are the input information for the Level-1 muon trigger and, also, are a necessary condition for chambers to be read out by the Data Acquisition System
Measurement of the Diffractive Cross Section in Deep Inelastic Scattering using ZEUS 1994 Data
The DIS diffractive cross section, , has been measured in the mass range GeV for c.m. energies GeV and photon virtualities to 140 GeV. For fixed and , the diffractive cross section rises rapidly with , with corresponding to a -averaged pomeron trajectory of \bar{\alphapom} = 1.127 \pm 0.009 (stat)^{+0.039}_{-0.012} (syst) which is larger than \bar{\alphapom} observed in hadron-hadron scattering. The dependence of the diffractive cross section is found to be the same as that of the total cross section for scattering of virtual photons on protons. The data are consistent with the assumption that the diffractive structure function factorizes according to \xpom F^{D(3)}_2 (\xpom,\beta,Q^2) = (x_0/ \xpom)^n F^{D(2)}_2(\beta,Q^2). They are also consistent with QCD based models which incorporate factorization breaking. The rise of \xpom F^{D(3)}_2 with decreasing \xpom and the weak dependence of on suggest a substantial contribution from partonic interactions
- …