Ternary alloy nanocatalysts for hydrogen evolution reaction

Cu–Fe–Ni ternary alloys (size ∼55–80 nm) with varying compositions viz. CuFeNi (A1), CuFe2Ni (A2) and CuFeNi2 (A3) were successfully synthesized using microemulsion. It is to be noted that synthesis of nanocrystalline ternary alloys with precise composition is a big challenge which can be overcome by choosing an appropriate microemulsion system. High electrocatalytic activity towards HER in alkaline medium was achieved by the formation of alloys of metals with low and high binding energies. A high value of current density (228 mA cm2) at an overpotential of 545 mV was obtained for CuFeNi (A1), which is significantly high as compared to the previously reported Ni59Cu41 alloy catalyst

Crystallization engineering as a route to epitaxial strain control

The controlled synthesis of epitaxial thin films offers opportunities for tuning their functional properties via enabling or suppressing strain relaxation. Examining differences in the epitaxial crystallization of amorphous oxide films, we report on an alternate, low-temperature route for strain engineering. Thin films of amorphous Bi–Fe–O were grown on (001)SrTiO3 and (001)LaAlO3substrates via atomic layer deposition. In situ X-ray diffraction and X-ray photoelectron spectroscopy studies of the crystallization of the amorphous films into the epitaxial (001)BiFeO3 phase reveal distinct evolution profiles of crystallinity with temperature. While growth on (001)SrTiO3 results in a coherently strained film, the same films obtained on (001)LaAlO3 showed an unstrained, dislocation-rich interface, with an even lower temperature onset of the perovskite phase crystallization than in the case of (001)SrTiO3. Our results demonstrate how the strain control in an epitaxial film can be accomplished via its crystallization from the amorphous state

Silver Oxide Coatings with High Silver-Ion Elution Rates and Characterization of Bactericidal Activity.

This paper reports the synthesis and characterization of silver oxide films for use as bactericidal coatings. Synthesis parameters, dissolution/elution rate, and bactericidal efficacy are reported. Synthesis conditions were developed to create AgO, Ag₂O, or mixtures of AgO and Ag₂O on surfaces by reactive magnetron sputtering. The coatings demonstrate strong adhesion to many substrate materials and impede the growth of all bacterial strains tested. The coatings are effective in killing Escherichia coli and Staphylococcus aureus, demonstrating a clear zone-of-inhibition against bacteria growing on solid media and the ability to rapidly inhibit bacterial growth in planktonic culture. Additionally, the coatings exhibit very high elution of silver ions under conditions that mimic dynamic fluid flow ranging between 0.003 and 0.07 ppm/min depending on the media conditions. The elution of silver ions from the AgO/Ag₂O surfaces was directly impacted by the complexity of the elution media, with a reduction in elution rate when examined in complex cell culture media. Both E. coli and S. aureus were shown to bind ~1 ppm Ag⁺/mL culture. The elution of Ag⁺ resulted in no increases in mammalian cell apoptosis after 24 h exposure compared to control, but apoptotic cells increased to ~35% by 48 and 72 h of exposure. Taken together, the AgO/Ag₂O coatings described are effective in eliciting antibacterial activity and have potential for application on a wide variety of surfaces and devices

Combinatorial Investigation of Magnetostriction in Fe-Fa and Fe-Ga-Al

A high-throughput high-sensitivity optical technique for measuringmagnetostriction of thin-film composition-spread samples has been developed. It determines the magnetostriction by measuring the induced deflection of micromachined cantilever unimorph samples. Magnetostrictionmeasurements have been performed on as-deposited Fe–Ga and Fe–Ga–Al thin-film composition spreads. The thin-film Fe–Ga spreads display a similar compositional variation of magnetostriction as bulk. A previously undiscovered peak in magnetostriction at low Ga content was also observed and attributed to a maximum in the magnetocrystalline anisotropy. Magnetostrictive mapping of the Fe–Ga–Al ternary system reveals the possibility of substituting up to 8at.%Al in Fe70Ga30 without significant degradation of magnetostriction

Simultaneous large optical and piezoelectric effects induced by domain reconfiguration related to ferroelectric phase transitions

Electrical switching of ferroelectric domains and subsequent domain wall motion promotes strong piezoelectric activity; however, light scatters at refractive index discontinuities such as those found at domain wall boundaries. Thus, simultaneously achieving large piezoelectric effect and high optical transmissivity is generally deemed infeasible. Here, it is demonstrated that the ferroelectric domains in perovskite Pb(In1/2Nb1/2)O3 Pb(Mg1/3Nb2/3)O3-PbTiO3 domain-engineered crystals can be manipulated by electrical field and mechanical stress to reversibly and repeatably, with small hysteresis, transform the opaque poly-domain structure into a highly transparent mono-domain state. This control of optical properties can be achieved at very low electric fields (less than 1.5 kV cm−1) and is accompanied by a large (>10000 pm V−1) piezoelectric coefficient that is superior to that of linear state-of-the-art materials by a factor of three or more. The coexistence of tunable optical transmissivity and high piezoelectricity paves the way for a new class of photonic devices

Magnetic and electrochemical properties of nickel oxide nanoparticles obtained by the reverse-micellar route

Homogeneous nanoparticles of nickel oxide (NiO) of 25 nm size with narrow size distribution have been synthesized by the reverse-micellar route using CTAB (cetyltrimethyl ammonium bromide) as the surfactant. FTIR studies show a broad absorption around 405-415 cm−1 and a weak absorption around 82 cm−1 corresponding to a surface-active mode, which is indicative of the nanocrystalline nature of the oxide. Magnetization studies show nearly temperature independent paramagnetism with high magnetic moment compared to bulk NiO. Cyclic voltammetric (CV) studies show well-resolved anodic peak (Ni+2→Ni+3+e−;) at 0.45 V at a scan rate of 1 mV/s, which shifts to 0.47 V at the scan rate of 100 mV/s. The cathodic peak (Ni+3+e−→Ni+2) is also observed at 0.34 V, which remains at the same position irrespective of the sweep rate. The quasireversible nature of the voltammograms suggests the usefulness of these materials for ultracapacitor applications

Simultaneous Stress and Field Control of Sustainable Switching of Ferroelectric Phases

In ferroelectrics, manifestation of a strong electromechanical coupling is attributed to both engineered domain morphology and phase transformations. However, realization of large sustainable and reversible strains and polarization rotation has been limited by fatigue, nonlinearity and hysteresis losses. Here, we demonstrate that large strain and polarization rotation can be generated for over 40 × 106 cycles with little fatigue by realization of a reversible ferroelectric-ferroelectric phase transition in [011] cut Pb(In1/2Nb1/2)O3-Pb(Mg1/3Nb2/3)O3-PbTiO3 (PIN-PMN-PT) relaxor ferroelectric single crystal. Direct tuning of this effect through combination of stress and applied electric field, confirmed both macroscopically and microscopically with x-ray and Raman scattering, reveals the local symmetry while sweeping through the transition with a low applied electric field