11,032 research outputs found
Continuous-time acquisition of biosignals using a charge-based ADC topology
This paper investigates continuous-time (CT) signal acquisition as an activity-dependent and nonuniform sampling alternative to conventional fixed-rate digitisation. We demonstrate the applicability to biosignal representation by quantifying the achievable bandwidth saving by nonuniform quantisation to commonly recorded biological signal fragments allowing a compression ratio of ≈5 and 26 when applied to electrocardiogram and extracellular action potential signals, respectively. We describe several desirable properties of CT sampling, including bandwidth reduction, elimination/reduction of quantisation error, and describe its impact on aliasing. This is followed by demonstration of a resource-efficient hardware implementation. We propose a novel circuit topology for a charge-based CT analogue-to-digital converter that has been optimized for the acquisition of neural signals. This has been implemented in a commercially available 0.35 μm CMOS technology occupying a compact footprint of 0.12 mm 2 . Silicon verified measurements demonstrate an 8-bit resolution and a 4 kHz bandwidth with static power consumption of 3.75 μW from a 1.5 V supply. The dynamic power dissipation is completely activity-dependent, requiring 1.39 pJ energy per conversion
Geometrical parametric study on steel beams exposed to solar radiation
A finite element thermal analysis was conducted in this study with the aim of evaluating the influence of the geometrical parameters of steel sections on their thermal response under solar radiation. Four W12 and W24 standard steel beams were investigated under the solar irradiation conditions of a sunny summer day. The finite element analysis was carried out using COMSOL Multiphysics considering the Sun’s movement from sunrise to sunset, reflected radiation from the ground, surface convection of air and long wave radiation as the main boundary thermal loads. The temperature-time variation at different locations in the sections, vertical temperature distributions, temperature gradient distributions and thermal stress distributions were investigated. The results showed that the daily maximum temperatures, temperature variation, temperature and temperature gradient distributions and thermal stresses are influenced by the geometry of the steel section. The flange width and flange thickness were found to be the controlling parameters during the noon hours, while these parameters in addition to web depth control the shading effect during the after-noon. On the other hand, web thickness affects the temperature of webs at sunrise and sunset times. Geometrical ratios like Wf/H, Wf/tf2 and 2Wf/Htf were the most influential parameters on tempera-tures, temperature gradients and thermal stresses of steel beams subjected to solar radiation. The investigated section with the maximum Wf/tf2 value of 0.96 (W12 × 58) recorded the highest top-surface noon temperature, while section W24 × 84 with the lowest Wf/tf2 value of 0.60 exhibited the lowest temperature
Vortex Depinning in a Two-Dimensional Superfluid
\ua9 The Author(s) 2024.We employ the Gross–Pitaevskii theory to model a quantized vortex depinning from a small obstacle in a two-dimensional superfluid due to an imposed background superfluid flow. We find that, when the flow’s velocity exceeds a critical value, the vortex drifts orthogonally to the flow before subsequently moving parallel to it away from the pinning site. The motion of the vortex around the pinning site is also accompanied by an emission of a spiral-shaped sound pulse. Through simulations, we present a phase diagram of the critical flow velocity for vortex depinning together with an empirical formula that illustrates how the critical velocity increases with the height and width of the pinning site. By employing a variety of choices of initial and boundary conditions, we are able to obtain lower and upper bounds on the critical velocity and demonstrate the robustness of these results
A reliability-based approach for influence maximization using the evidence theory
The influence maximization is the problem of finding a set of social network
users, called influencers, that can trigger a large cascade of propagation.
Influencers are very beneficial to make a marketing campaign goes viral through
social networks for example. In this paper, we propose an influence measure
that combines many influence indicators. Besides, we consider the reliability
of each influence indicator and we present a distance-based process that allows
to estimate the reliability of each indicator. The proposed measure is defined
under the framework of the theory of belief functions. Furthermore, the
reliability-based influence measure is used with an influence maximization
model to select a set of users that are able to maximize the influence in the
network. Finally, we present a set of experiments on a dataset collected from
Twitter. These experiments show the performance of the proposed solution in
detecting social influencers with good quality.Comment: 14 pages, 8 figures, DaWak 2017 conferenc
Learning relative features through adaptive pooling for image classification
© 2014 IEEE. Bag-of-Feature (BoF) representations and spatial constraints have been popular in image classification research. One of the most successful methods uses sparse coding and spatial pooling to build discriminative features. However, minimizing the reconstruction error by sparse coding only considers the similarity between the input and codebooks. In contrast, this paper describes a novel feature learning approach for image classification by considering the dissimilarity between inputs and prototype images, or what we called reference basis (RB). First, we learn the feature representation by max-margin criterion between the input and the RB. The learned hyperplane is stored as the relative feature. Second, we propose an adaptive pooling technique to assemble multiple relative features generated by different RBs under the SVM framework, where the classifier and the pooling weights are jointly learned. Experiments based on three challenging datasets: Caltech-101, Scene 15 and Willow-Actions, demonstrate the effectiveness and generality of our framework
Diagnostic Value of Methylated Human Telomerase Reverse Transcriptase in Human Cancers: A Meta-Analysis
published_or_final_versio
A stitch in time: Efficient computation of genomic DNA melting bubbles
Background: It is of biological interest to make genome-wide predictions of
the locations of DNA melting bubbles using statistical mechanics models.
Computationally, this poses the challenge that a generic search through all
combinations of bubble starts and ends is quadratic.
Results: An efficient algorithm is described, which shows that the time
complexity of the task is O(NlogN) rather than quadratic. The algorithm
exploits that bubble lengths may be limited, but without a prior assumption of
a maximal bubble length. No approximations, such as windowing, have been
introduced to reduce the time complexity. More than just finding the bubbles,
the algorithm produces a stitch profile, which is a probabilistic graphical
model of bubbles and helical regions. The algorithm applies a probability peak
finding method based on a hierarchical analysis of the energy barriers in the
Poland-Scheraga model.
Conclusions: Exact and fast computation of genomic stitch profiles is thus
feasible. Sequences of several megabases have been computed, only limited by
computer memory. Possible applications are the genome-wide comparisons of
bubbles with promotors, TSS, viral integration sites, and other melting-related
regions.Comment: 16 pages, 10 figure
Fault-tolerant formation driving mechanism designed for heterogeneous MAVs-UGVs groups
A fault-tolerant method for stabilization and navigation of 3D heterogeneous formations is proposed in this paper. The presented Model Predictive Control (MPC) based approach enables to deploy compact formations of closely cooperating autonomous aerial and ground robots in surveillance scenarios without the necessity of a precise external localization. Instead, the proposed method relies on a top-view visual relative localization provided by the micro aerial vehicles flying above the ground robots and on a simple yet stable visual based navigation using images from an onboard monocular camera. The MPC based schema together with a fault detection and recovery mechanism provide a robust solution applicable in complex environments with static and dynamic obstacles. The core of the proposed leader-follower based formation driving method consists in a representation of the entire 3D formation as a convex hull projected along a desired path that has to be followed by the group. Such an approach provides non-collision solution and respects requirements of the direct visibility between the team members. The uninterrupted visibility is crucial for the employed top-view localization and therefore for the stabilization of the group. The proposed formation driving method and the fault recovery mechanisms are verified by simulations and hardware experiments presented in the paper
- …