Temperature and Strain Sensitivities of High-Birefringence Elliptical Fibers

We have analyzed and calculated the temperature and strain sensitivities of a high-birefringence double-clad elliptical fiber. We propose a method to minimize these sensitivities without increasing the fiber size or weight; this is achieved by selecting suitable fiber parameters—core ellipticity, refractive index difference, and thickness of the inner cladding. In addition, we discuss the design of temperature- or strain-insensitive fibers which may be used in polarimetric strain or temperature sensors. This method may also be used to minimize or enhance other external effects

Surface Roughness Measurement Using Dichromatic Speckle Pattern: An Experimental Study

Surface roughness is studied experimentally by making use of the statistical properties of dichromatic speckle patterns. The rms intensity difference between two speckle patterns produced by two argon laser lines are analyzed in the far field as functions of the object surface roughness and the difference in the two wavenumbers of the illuminating light. By applying previously derived formulas, the rms surface roughness is obtained from rms intensity differences. Glass and metal rough surfaces are used. Other than the scattering arrangement, the experimental setup has a simple spectrometric system and an electronic analyzing circuit

Mode Transforming Properties of Tapered Single-Mode Fiber Microlenses

The Gaussian approximation that is typically used to estimate single-mode fiber microlens performance is investigated. It is applied to hemispheric lenses on two types of tapered single-mode fiber. Theoretical and experimental results are compared. The first type of taper, which is fabricated by pulling a fiber while it is melted, has a tapered core and a tapered cladding. The second type of taper, which is fabricated by etching the cladding, has a tapered cladding only. For a tapered-core fiber, coupling to the cladding-guided modes and the finite radius of curvature of the wave front before the lens must be considered to predict the lens spot size accurately, whereas the spot size of a tapered-cladding lens can be predicted from the lens diameter alone. Thus the spot size of a lens on a tapered-cladding fiber is easier to predict and control than that of a lens on a tapered-core fiber. It is also shown that the usual theory used to predict the spot size gives accepted values for tapered-cladding lenses but not for tapered-core lenses

Single-Mode Fiber Microlens with Controllable Spot Size

A novel method for fabricating microlenses on tapered single-mode fibers is shown to be able to control the lens spot size. The fiber cladding is first symmetrically tapered by etching it with an evaporating ammonium bifluoride solution. A hemispheric lens is then melted on the taper tip with a CO2 laser. The lens can reduce the fiber mode radius to 40% of its original value. A theoretical calculation of the focused spot size agrees well with experimental results

Equivalent-Layer Method for Optical Waveguides with a Multi-Quantum-Well Structure

An equivalent-layer method for analyzing multiple-quantum-well (MQW) waveguides is presented. This method not only allows the whole waveguide to be treated as a three-layer waveguide but offers exact solutions for the propagation constant of MQW waveguides and the power confinement factor within the MQW structure as well. A comparison between this method and two other three-layer models is given

Temperature and Strain Sensitivity Measurements of High-Birefringent Polarization-Maintaining Fibers

The strain and temperature sensitivities of three common commercial high-birefringent polarization maintaining fibers (bow-tie, polarization-maintaining and absorption-reducing, and elliptical core fibers) have been measured by using a dynamic polarimetric method. The experimental setup and measuring process are described in detail. Where possible, the measuring data are compared with published data, and good agreement is obtained

Full Modeling of Field-Assisted Ion Exchange for Graded Index Buried Channel Optical Waveguides

The numerical modeling of field-assisted ion exchange in glass through a finite aperture is carried out. The effects of unequal ion mobilities and thermal diffusion are included we believe for the first time in the 2-D case. This allows for the modeling of optical channel waveguides with graded index profiles. It is demonstrated that annealing of backdiffused channel guides is far superior to backdiffusion alone in improving their circular symmetry for better coupling to optical fibers

Time-Explicit Simulation of Wave Interaction in Optical Waveguide Crossings at Large Angles

The time-explicit finite-difference time-domain method is used to simulate wave interaction in optical waveguide crossings at large angles. The wave propagation at the intersecting structure is simulated by time stepping the discretized form of the Maxwell’s time dependent curl equations. The power distribution characteristics of the intersections are obtained by extracting the guided-mode amplitudes from these simulated total field data. A physical picture of power flow in the intersection is also obtained from the total field solution; this provides insights into the switching behavior and the origin of the radiations

The vertical metal insulator semiconductor tunnel transistor: A proposed Fowler-Nordheim tunneling device

We propose a new field-effect transistor, the vertical metal insulator semiconductor tunnel transistor (VMISTT) which operates using gate modulation of the Fowler-Nordheim tunneling current through a metal insulator semiconductor (M-I-S) diode. The VMISTT has significant advantages over the metal-oxide-semiconductor field-effect transistor in device scaling. In order to allow room-temperature operation of the VMISTT, the tunnel oxide has to be optimized for the metal-to-insulator barrier height and the current-voltage characteristics. We have grown TiO2 layers as the tunnel insulator by oxidizing 7 and 10 nm thick Ti metal films vacuum-evaporated on silicon substrates, and characterized the films by current-voltage and capacitance-voltage techniques. The quality of the oxide films showed variations, depending on the oxidation temperatures in the range of 450-550 degrees C. Fowler-Nordheim tunneling was observed at low temperatures at bias voltage of 2 V and above and a barrier height of approximately 0.4 eV was calculated. Leakage currents present were due Schottky-barrier emission at room-temperature, and hopping at liquid nitrogen temperature

Fabrication of Tapers and Lenslike Waveguides by a Microcontrolled Dip Coating Procedure

A technique for the fabrication of tapered and lenslike waveguides from solution-deposited thin films is described. Using a microprocessor controlled dipping arm, substrates are withdrawn from a solution with a carefully controlled and varying velocity. In this way optical waveguides with regions of varying thickness are deposited. Following the drying and baking of the films, desired structures are obtained in hard inorganic optical waveguides of good optical quality. With refined profile control, we propose to fabricate other optical waveguide components, for example, thin film lenses with this method