Single shot cathode transverse momentum imaging in high brightness photoinjectors

In state of the art photoinjector electron sources, thermal emittance from photoemission dominates the final injector emittance. Therefore, low thermal emittance cathode developments and diagnostics are very important. Conventional thermal emittance measurements for the high gradient gun are time-consuming and thus thermal emittance is not measured as frequently as quantum efficiency during the lifetime of photocathodes, although both are important properties for the photoinjector optimizations. In this paper, a single shot measurement of photoemission transverse momentum, i.e., thermal emittance per rms laser spot size, is proposed for photocathode rf guns. By tuning the gun solenoid focusing, the electrons' transverse momenta at the cathode are imaged to a downstream screen, which enables a single shot measurement of both the rms value and the detailed spectra of the photoelectrons' transverse momenta. Both simulations and proof of principle experiments are reported

Photocathode laser based bunch shaping for high transformer ratio plasma wakefield acceleration

Beam driven plasma acceleration is one of the most promising candidates for future compact particle accelerator technologies. In this scheme a particle bunch drives a wake in a plasma medium. The fields inside of the wake can be used to accelerate a trailing witness bunch. To maximise the ratio between acceleration of the witness to deceleration of the drive bunch, the so called transformer ratio, several methods have been proposed. The ones yielding the most favorable results are based on shaped drive bunches that are long in terms of the plasma wavelength. We present here methods to create such drive bunches employing temporally shaped UV-laser pulses for the extraction of electron bunches from a photo-electron gun. Theoretical considerations, experimental results and possibilities for further improvements are discussed

Studies on charge production from Cs2Te photocathodes in the PITZ L-band normal conducting radio frequency photo injector

This paper discusses the behavior of electron bunch charge produced in an L-band normal conducting radio frequency cavity (RF gun) from Cs2Te photocathodes illuminated with ps-long UV laser pulses when the laser transverse distribution consists of a flat-top core with Gaussian-like decaying halo. The produced charge shows a linear dependence at low laser pulse energies as expected in the quantum efficiency limited emission regime, while its dependence on laser pulse energy is observed to be much weaker for higher values, due to space charge limited emission. However, direct plug-in of experimental parameters into the space charge tracking code ASTRA yields lower output charge in the space charge limited regime compared to measured values. The rate of increase of the produced charge at high laser pulse energies close to the space charge limited emission regime seems to be proportional to the amount of halo present in the radial laser profile since the charge from the core has saturated already. By utilizing core + halo particle distributions based on measured radial laser profiles, ASTRA simulations and semi-analytical emission models reproduce the behavior of the measured charge for a wide range of RF gun and laser operational parameters within the measurement uncertainties.Comment: 15 pages, 16 figures, 2 table

Emittance Reduction of RF Photoinjector Generated Electron Beams by Transverse Laser Beam Shaping

Laser pulse shaping is one of the key elements to generate low emittance electron beams with RF photoinjectors. Ultimately high performance can be achieved with ellipsoidal laser pulses, but 3-dimensional shaping is challenging. High beam quality can also be reached by simple transverse pulse shaping, which has demonstrated improved beam emittance compared to a transversely uniform laser in the 'pancake' photoemission regime. In this contribution we present the truncation of a Gaussian laser at a radius of approximately one sigma in the intermediate (electron bunch length directly after emission about the same as radius) photoemission regime with high acceleration gradients (up to 60 MV/m). This type of electron bunch is used e.g. at the European XFEL and FLASH free electron lasers at DESY, Hamburg site and is being investigated in detail at the Photoinjector Test facility at DESY in Zeuthen (PITZ). Here we present ray-tracing simulations and experimental data of a laser beamline upgrade enabling variable transverse truncation. Initial projected emittance measurements taken with help of this setup are shown, as well as supporting beam dynamics simulations. Additional simulations show the potential for substantial reduction of slice emittance at PITZ. © Published under licence by IOP Publishing Ltd

Polymer foil windows for gas vacuum separation in accelerator applications

Various applications in modern particle accelerators or experiments involving high energy particle beams require a gas atmosphere or involve the production of big amounts of residual gas. Among these are, e.g., gas cells for plasma acceleration, gas jet targets, or plasma lenses. As high beam quality and stable operation of RF-accelerator cavities demand for ultra-high vacuum (UHV) conditions, a separation between high pressure and UHV beamline sections is needed. Commonly, this is realized by differential pumping or thin windows, the main advantages of the latter being a simple and compact setup. Nevertheless, the interaction between the window and the beam particles reduces the beamquality via scattering. In this paper, low scattering, low permeability polymer foils that can withstand pressure differences up to 1 bar are investigated as electron beam windows. Measurements, analytical considerations, and simulations on the gas permeation, radiation, and UV resistivity as well as electron beam scattering are presented

Towards Experimental Investigation of Hosing Instability Mitigation at the PITZ Facility

Beam-driven plasma wakefield acceleration (PWFA) allows for high gradient acceleration of electron beams and hence is a promising candidate for compact and cost-efficient drivers of applications demanding high brightness beams. One of the main challenges in these accelerators is to control beam-plasma instabilities with rapid growth rates which are induced by the strong transverse components of the wakefields. The hosing instability, a growing transverse oscillation of the beam centroid caused by coherent coupling between bunch slice centroids and transverse wakefields, was predicted to set severe limits on the possible acceleration distance in PWFAs. Several methods have been proposed to damp or even suppress the hosing of the beam, prevent beam-breakup and thus allow stable operation. Here, we present preparations and simulation studies aiming at the experimental investigation of hosing suppression mechanisms at the PITZ facility