170,303 research outputs found
The effects of protected beams and their connections on the fire resistance of composite buildings
According to full-scale fire tests, it is noticed that tensile membrane action within the concrete floor slabs plays an important role in affecting the fire resistance of composite buildings. It is well known that the development of tensile membrane actions relies on the vertical support along the edges of the slab panel. However, there is at present a lack of research into the influence of vertical supports on the tensile membrane actions of the floor slabs. In this paper, the performances of a generic three dimensional 45m x 45m composite floor subjected to ISO834 Fire and Natural Fire are investigated. Different vertical support conditions and three steel meshes are applied in order to assess the impact of vertical supports on tensile membrane action of floor slabs. Unlike other existing large scale modelling which assumes the connections behave as pinned or rigid for simplicity, two robust 2-node connection element models developed by the authors are used to model the behaviour of end-plate and partial end-plate connections of composite structures under fire conditions. The impact of connections on the 3D behaviour of composite floor is taken into consideration. The load-transfer mechanisms of composite floor when connections fail due to axial tension, vertical shear and bending are investigated. Based on the results obtained, some design recommendations are proposed to enhance the fire resistance of composite buildings
Effect of Liquid Surface Turbulent Motion on the Vapor Condensation in a Mixing Tank
The effect of liquid surface motion on the vapor condensation in a tank mixed by an axial turbulent jet is numerically investigated. The average value (over the interface area) of the root-mean-squared (rms) turbulent velocity at the interface is shown to be linearly increasing with decreasing liquid height and increasing jet diameter for a given tank size. The average rms turbulent velocity is incorporated in Brown et al. (1990) condensation correlation to predict the condensation of vapor on a liquid surface. The results are in good agreement with available condensation data
Self-pressurization of a spherical liquid hydrogen storage tank in a microgravity environment
Thermal stratification and self-pressurization of partially filled liquid hydrogen (LH2) storage tanks under microgravity condition is studied theoretically. A spherical tank is subjected to a uniform and constant wall heat flux. It is assumed that a vapor bubble is located in the tank center such that the liquid-vapor interface and tank wall form two concentric spheres. This vapor bubble represents an idealized configuration of a wetting fluid in microgravity conditions. Dimensionless mass and energy conservation equations for both vapor and liquid regions are numerically solved. Coordinate transformation is used to capture the interface location which changes due to liquid thermal expansion, vapor compression, and mass transfer at liquid-vapor interface. The effects of tank size, liquid fill level, and wall heat flux on the pressure rise and thermal stratification are studied. Liquid thermal expansion tends to cause vapor condensation and wall heat flux tends to cause liquid evaporation at the interface. The combined effects determine the direction of mass transfer at the interface. Liquid superheat increases with increasing wall heat flux and liquid fill level and approaches an asymptotic value
A numerical study of the direct contact condensation on a horizontal surface
The results of a numerical study of the direct contact condensation on a slowly moving horizontal liquid surface are presented. The geometrical configuration and the input conditions used to obtain numerical solutions are representative to those of experiments of Celata et al. The effects of Prandtl number (Pr), inflow Reynolds number, and Richardson number on the condensation rate are investigated. Numerical predictions of condensation rate for laminar flow are in good agreement with experimental data. The effect of buoyancy on the condensation rate is characterized by Richardson number. A correlation based on the numerical solutions is developed to predict the average condensation Nusselt number in terms of Richardson number, Peclet number, and inflow Reynolds number
Modelling the influence of personality and culture on affect and enjoyment in multimedia
Affect is evoked through an intricate relationship between the characteristics of stimuli, individuals, and systems of perception. While affect is widely researched, few studies consider the combination of multimedia system characteristics and human factors together. As such, this paper explores the influence of personality (Five-Factor Model) and cultural traits (Hofstede Model) on the intensity of multimedia-evoked positive and negative affects (emotions). A set of 144 video sequences (from 12 short movie clips) were evaluated by 114 participants from a cross-cultural population, producing 1232 ratings. On this data, three multilevel regression models are compared: a baseline model that only considers system factors; an extended model that includes personality and culture; and an optimistic model in which each participant is modelled. An analysis shows that personal and cultural traits represent 5.6% of the variance in positive affect and 13.6% of the variance in negative affect. In addition, the affect-enjoyment correlation varied across the clips. This suggests that personality and culture play a key role in predicting the intensity of negative affect and whether or not it is enjoyed, but a more sophisticated set of predictors is needed to model positive affect with the same efficacy
- …