1,768 research outputs found
Recommended from our members
The effects of ocular and lens parameters on the postlens tear thickness.
PURPOSE:To assess the effects of soft contact lens base curve radius (BCR), sex, ethnicity, central corneal curvatures, and vertical palpebral aperture size (PAS) on the postlens tear thickness (PLTT). METHODS:The PLTT was measured using optical pachometry on 114 experienced lens wearers who were fitted with lathe-cut soft lenses (Alden 47, polymacon, 35.5% H2O, -2.00 diopter, and 14.0 mm). Each subject was randomly allocated to one lens group receiving a BCR of 7.9, 8.3, or 8.7 mm. Pachometry measurements were taken at 30 min after lens insertion. Vertical PAS and keratometry readings were measured for 94 of the 114 subjects. RESULTS:The mean (95% confidence interval) PLTT was 15.7 microm (13.2-18.0 microm), 12.8 microm (10.9-14.7 microm), and 12.1 microm (10.2-14.0 microm) for the 7.9-mm, 8.3-mm, and 8.7-mm BCR groups, respectively. The differences in PLTT among the three BCR groups was significant (analysis of variance F-test; P=0.039). Post hoc testing using the Tukey honestly significant difference statistic showed that only the two extreme BCR groups (7.9 mm and 8.7 mm) were significantly different. Sex had no effect on the PLTT; however, the PLTT was significantly thinner for the Asian compared with non-Asian eyes (P=0.0001). The Asian PLTT did not vary with different soft lens BCRs. The non-Asian PLTT was thicker with lenses of the steep BCR compared with the flat BCR. CONCLUSION:These results show that the base curve radius of a soft contact lens and several ocular characteristics can affect the thickness of the postlens tear film
Fidelity, dynamic structure factor, and susceptibility in critical phenomena
Motivated by the growing importance of fidelity in quantum critical
phenomena, we establish a general relation between fidelity and structure
factor of the driving term in a Hamiltonian through a newly introduced concept:
fidelity susceptibility. Our discovery, as shown by some examples, facilitates
the evaluation of fidelity in terms of susceptibility using well developed
techniques such as density matrix renormalization group for the ground state,
or Monte Carlo simulations for the states in thermal equilibrium.Comment: 4 pages, 2 figures, final version accepted by PR
Recommended from our members
Soft contact lens extended wear affects corneal epithelial permeability: hypoxic or mechanical etiology?
Contact lens extended wear increases the permeability of epithelium to sodium fluorescein (P(dc)). The exact mechanism is not known. However, changes in P(dc) likely result from either corneal hypoxia or mechanical trauma, or both. We explored the effects of one-night continuous wear with either high- or low-Dk/t soft lenses on P(dc). The results show that corneal epithelial barrier function decreases significantly with both lens groups. We also observed that Asian eyes had higher P(dc) after overnight wear compared to non-Asian and that for both Asian and non-Asian eyes, the elimination of corneal hypoxia did not prevent changes in epithelial permeability
Coverage of harm reduction services and HIV infection: A multilevel analysis of five Chinese cities
__Background:__ Since 2003, a harm reduction program for injecting drug users has been rolled out countrywide in China. It entails services for condom promotion, a needle and syringe program (NSP), and methadone maintenance treatment (MMT). However, it remains unknown if and to what extent the coverage of these services at city level is related to a reduced risk of HIV infection among drug users.
__Methods:__ We wished to quantify the extent to which city-level characteristics (such as NSP and MMT service coverage) and individual-level determinants (e.g., self-reported exposure to NSP and MMT services, knowledge, motivation, and skills) were associated with the risk of HIV infection among drug users. In 2006, we conducted an integrated serological and behavioral survey among drug users in five cities of Yunnan Province, China (N = 685), constructing a multilevel logistic regression model with drug users clustered within these cities.
__Results:__ Drug users who reported having received NSP or MMT services were about 50% less likely to be infected with HIV than those who reported not having received them (OR 0.45, 95% CI, 0.26-0.83 for NSP and 0.48, 95% CI, 0.31-0.73 for MMT). Despite a between-city variation of HIV infection risk (ICC 0.24, 95% CI 0.08-0.54), none of the city-level factors could explain this difference. Individual-level determinants such as perceived risk of infection and use of condoms were not associated with HIV infection.
__Conclusions:__ Although people who had used NSP or MMT services were less likely to be HIV infected, this study found no relationship between city-level coverage of HIV prevention programs and variations in HIV infection between cities. This may have been due to the low number of cities in the analysis. Future research should include the analysis of data from a larger number of cities, which are collected widely in China through integrated behavioral and serological surveys
Power and sample size for dose-finding studies with survival endpoints under model uncertainty
Multiple comparison procedures combined with modeling techniques (MCP-Mod) (Bretz et al., 2005) is an efficient and robust statistical methodology for the model-based design and analysis of dose-finding studies with an unknown dose–response model. With this approach, multiple comparison methods are used to identify statistically significant contrasts corresponding to a set of candidate dose–response models, and the best model is then used to estimate the target dose. Power and sample size calculations for this methodology require knowledge of the covariance matrix for the estimators of the (placebo-adjusted) mean responses among the dose groups. In this article, we consider survival endpoints and derive an analytic form of the covariance matrix for the estimators of the log hazard ratios as a function of the total number of events in the study. We then use this closed-form expression of the covariance matrix to derive the power and sample size formulas. We discuss practical considerations in the application of these formulas. In addition, we provide an illustration with a motivating example on chronic obstructive pulmonary disease. Finally, we demonstrate through simulation studies that the proposed formulas are accurate enough for practical use. © 2018, The International Biometric Societ
KxFe2-ySe2 single crystals: Floating-zone growth, Transport and Structural properties
Single crystals of superconducting KxFe2-ySe2 have been grown with the
optical floating-zone technique under application of 8 bar of argon pressure.
We found that large and high quality single crystals with dimensions of
~\varnothing6 \times 10 mm could be obtained at the termination of the grown
ingot through quenching, while the remaining part of the ingot decomposed.
As-grown single crystals commonly represent an intergrowth of two sets of the
c-axis characterized by slightly different lattice constants. Single crystal of
K0.80Fe1.81Se2 shows a superconducting transition at Tc = 31.6 K, leading to a
near 100% expulsion of the external magnetic field in magnetization
measurements. On the other hand, neutron-diffraction data indicate that
superconductivity in the sample coexists with a iron-vacancy superstructure and
static antiferromagnetic order. The anisotropic ratio of the upper critical
field Hc2 for both H//c and H//ab configurations is \sim3.46
Establishing the feasibility of the dosimetric compliance criteria of RTOG 1308: phase III randomized trial comparing overall survival after photon versus proton radiochemotherapy for inoperable stage II-IIIB NSCLC.
BACKGROUND: To establish the feasibility of the dosimetric compliance criteria of the RTOG 1308 trial through testing against Intensity Modulation Radiation Therapy (IMRT) and Passive Scattering Proton Therapy (PSPT) plans.
METHODS: Twenty-six lung IMRT and 26 proton PSPT plans were included in the study. Dose Volume Histograms (DVHs) for targets and normal structures were analyzed. The quality of IMRT plans was assessed using a knowledge-based engineering tool.
RESULTS: Most of the RTOG 1308 dosimetric criteria were achieved. The deviation unacceptable rates were less than 10 % for most criteria; however, a deviation unacceptable rate of more than 20 % was computed for the planning target volume minimum dose compliance criterion. Dose parameters for the target volume were very close for the IMRT and PSPT plans. However, the PSPT plans led to lower dose values for normal structures. The dose parameters in which PSPT plans resulted in lower values than IMRT plans were: lung V5Gy (%) (34.4 in PSPT and 47.2 in IMRT); maximum spinal cord dose (31.7 Gy in PSPT and 43.5 Gy in IMRT); heart V5Gy (%) (19 in PSPT and 47 in IMRT); heart V30Gy (%) (11 in PSPT and 19 in IMRT); heart V45Gy (%) (7.8 in PSPT and 12.1 in IMRT); heart V50% (Gy) (7.1 in PSPT and 9.8 in IMRT) and mean heart dose (7.7 Gy in PSPT and 14.9 Gy in IMRT).
CONCLUSIONS: The revised RTOG 1308 dosimetric compliance criteria are feasible and achievable
Metamagnetic transition in EuFeAs single crystals
We report the measurements of anisotropic magnetization and magnetoresistance
on single crystals of EuFeAs, a parent compound of ferro-arsenide
high-temperature superconductor. Apart from the antiferromagnetic (AFM)
spin-density-wave transition at 186 K associated with Fe moments, the compound
undergoes another magnetic phase transition at 19 K due to AFM ordering of
Eu spins (). The latter AFM state exhibits metamagnetic
transition under magnetic fields. Upon applying magnetic field with at 2 K, the magnetization increases linearly to 7.0 /f.u. at
=1.7 T, then keeps at this value of saturated Eu moments under
higher fields. In the case of , the magnetization increases
step-like to 6.6 /f.u. with small magnetic hysteresis. A metamagnetic
phase was identified with the saturated moments of 4.4 /f.u. The
metamagnetic transition accompanies with negative in-plane magnetoresistance,
reflecting the influence of Eu moments ordering on the electrical
conduction of FeAs layers. The results were explained in terms of
spin-reorientation and spin-reversal based on an -type AFM structure for
Eu spins. The magnetic phase diagram has been established.Comment: 10 pages, 8 figures. accepted for publication in New Journal of
Physics as a special issue articl
- …