Nouveaux oxydes conducteurs transparents à structure fluorine déficitaire en oxygène, contenant de l antimoine (V) ou des paires cationiques M(II)/Sb(V) ou Sn(IV) (cristallochimie et propriétés physiques)

CAEN-BU Sciences et STAPS (141182103) / SudocSudocFranceF

Influence of HAP on the Morpho-Structural Properties and Corrosion Resistance of ZrO₂-Based Composites for Biomedical Applications

In the present work, ZrO2-based composites were prepared by adding different amounts of antibacterial magnesium oxide and bioactive and biocompatible hydroxyapatite (HAP) to the inert zirconia. The composites were synthesized by the conventional ceramic processing route and morpho-structurally analyzed by X-ray powder diffraction (XRPD) and scanning electron microscopy/energy dispersive X-ray spectroscopy (SEM/EDS). Two metallic dental alloys (i.e., Ni–Cr and Co–Cr) coated with a chitosan (Chit) membrane containing the prepared composites were exposed to aerated artificial saliva solutions of different pHs (i.e., 4.3, 5, 6) and the corrosion resistances were investigated by electrochemical impedance spectroscopy technique. The obtained results using the two investigated metallic dental alloys shown quasi-similar anticorrosive properties, having quasi-similar charge transfer resistance, when coated with different ZrO2-based composites. This behavior could be explained by the synergetic effect between the diffusion process through the Chit-composite layer and the roughness of the metallic electrode surface

In Vitro Degradation of Mg-Doped ZrO₂ Bioceramics at the Interface with Xerostom^® Saliva Substitute Gel

Zirconia-based bioceramics, one of the most important materials used for dental applications, have been intensively studied in recent years due to their excellent mechanical resistance and chemical inertness in the mouth. In this work, the structural, morphological and dissolution properties of the Zr1−xMgxO2 (x = 0.05, 0.1, 0.15, 0.2, 0.25, and 0.3) system, prepared by the conventional ceramic method, were evaluated before and after immersion in saliva substitute gel (Xerostom®, Biocosmetics Laboratories, Madrid, Spain), one of the most common topical dry mouth products used in dentistry. The X-ray powder diffraction (XRPD), Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy/energy-dispersive X-ray spectroscopy (SEM/EDS) techniques were employed to investigate the phase transformations and morphology of the ceramics during the degradation process in Xerostom®. In vitro analyses showed overall good stability in the Xerostom® environment, except for the x = 0.05 composition, where significant t- to m-ZrO2 transformation occurred. In addition, the strong interconnection of the grains was maintained after immersion, which could allow a high mechanical strength of the ceramics to be obtained

Preparation and Characterization of Doxycycline-Loaded Electrospun PLA/HAP Nanofibers as a Drug Delivery System

The present study aimed to prepare nanofibers by electrospinning in the system polylactic acid-hydroxyapatite-doxycycline (PLA-HAP-Doxy) to be used as a drug delivery vehicle. Two different routes were employed for the preparation of Doxy-containing nanofibers: Immobilization on the electrospun mat’s surface and encapsulation in the fiber structure. The nanofibers obtained by Doxy encapsulation were characterized using Fourier transform infrared (FTIR) spectroscopy, thermogravimetric (TG) and differential thermal analyses (DTA) and scanning electron microscopy (SEM). The adsorption properties of pure PLA and PLA-HAP nanofibers were investigated for solutions with different Doxy concentrations (3, 7 and 12 wt%). Moreover, the desorption properties of the active substance were tested in two different fluids, simulated body fluid (SBF) and phosphate buffer solution (PBS), to evidence the drug release properties. In vitro drug release studies were performed and different drug release kinetics were assessed to confirm the use of these nanofiber materials as efficient drug delivery vehicles. The obtained results indicate that the PLA-HAP-Doxy is a promising system for biomedical applications, the samples with 3 and 7 wt% of Doxy-loaded PLA-HAP nanofibers prepared by physical adsorption are the most acceptable membranes to provide prolonged release in PBS/SBF rather than an immediate release of Doxy

In Vitro Antimicrobial Effect of Novel Electrospun Polylactic Acid/Hydroxyapatite Nanofibres Loaded with Doxycycline

The present study aimed to assess the in vitro antimicrobial effects of a novel biomaterial containing polylactic acid (PLA), nano-hydroxyapatite (nano-HAP) and Doxycycline (Doxy) obtained by electrospinning and designed for the non-surgical periodontal treatment. The antimicrobial activity of two samples (test sample, PLA-HAP-Doxy7: 5% PLA, nano-HAP, 7% Doxy and control sample, PLA-HAP: 5% PLA, nano-HAP) against two periodontal pathogens—Aggregatibacter actinomycetemcomitans and Porphyromonas gingivalis—was assessed using the Kirby–Bauer Disk Diffusion Susceptibility Test and compared with the effect of four antibiotics used as adjuvants in periodontal therapy: Amoxicillin, Ampicillin, Doxy and Metronidazole. The test sample (embedded with Doxy) showed higher inhibitory effects than commonly used antibiotics used in the treatment of periodontitis, while the control sample showed no inhibitory effects. Moreover, significant differences were observed between the inhibition zones of the two samples (p < 0.05). The Doxy-loaded PLA nanofibres had an antimicrobial effect against the periodontal pathogens. Based on these results, the novel biomaterial could be a promising candidate as adjuvant for the non-surgical local treatment in periodontitis