Focal Plane Alignment Utilizing Optical CMM

In many applications, an optical detector has to be located relative to mechanical reference points. One solution is to specify stringent requirements on (1) mounting the optical detector relative to the chip carrier, (2) soldering the chip carrier onto the printed circuit board (PCB), and (3) installing the PCB to the mechanical structure of the subsystem. Figure 1 shows a sketch of an optical detector mounted relative to mechanical reference with high positional accuracy. The optical detector is typically a fragile wafer that cannot be physically touched by any measurement tool. An optical coordinate measuring machine (CMM) can be used to position optical detectors relative to mechanical reference points. This approach will eliminate all requirements on positional tolerances. The only requirement is that the PCB is manufactured with oversized holes. An exaggerated sketch of this situation is shown in Figure 2. The sketch shows very loose tolerances on mounting the optical detector in the chip carrier, loose tolerance on soldering the chip carrier to the PCB, and finally large tolerance on where the mounting screws are located. The PCB is held with large screws and oversized holes. The PCB is mounted loosely so it can move freely around. The optical CMM measures the mechanical reference points. Based on these measurements, the required positions of the optical detector corners can be calculated. The optical CMM is commanded to go to the position where one detector corner is supposed to be. This is indicated with the cross-hairs in Figure 2(a). This figure is representative of the image of the optical CMM monitor. Using a suitable tapping tool, the PCB is manually tapped around until the corner of the optical detector is at the crosshairs of the optical CMM. The CMM is commanded to another corner, and the process is repeated a number of times until all corners of the optical detector are within a distance of 10 to 30 microns of the required position. The situation is sketched in Figure 2(b) (the figure also shows the tapping tool and where to tap). At this point the fasteners for the PCB are torqued slightly so the PCB can still move. The PCB location is adjusted again with the tapping tool. This process is repeated 3 to 4 times until the final torque is achieved. The oversized mounting holes are then filled with a liquid bonding agent to secure the board in position (not shown in the sketch). A 10- to 30-micron mounting accuracy has been achieved utilizing this method.

Hydrogen-like nitrogen radio line from hot interstellar and warm-hot intergalactic gas

Hyperfine structure lines of highly-charged ions may open a new window in observations of hot rarefied astrophysical plasmas. In this paper we discuss spectral lines of isotopes and ions abundant at temperatures 10^5-10^7 K, characteristic for warm-hot intergalactic medium, hot interstellar medium, starburst galaxies, their superwinds and young supernova remnants. Observations of these lines will allow to study bulk and turbulent motions of the observed target and will broaden the information about the gas ionization state, chemical and isotopic composition. The most prospective is the line of the major nitrogen isotope having wavelength 5.65 mm (Sunyaev and Churazov 1084). Wavelength of this line is well-suited for observation of objects at z=0.15-0.6 when it is redshifted to 6.5-9 mm spectral band widely-used in ground-based radio observations, and, for example, for z>=1.3, when the line can be observed in 1.3 cm band and at lower frequencies. Modern and future radio telescopes and interferometers are able to observe the absorption by 14-N VII in the warm-hot intergalactic medium at redshifts above z=0.15 in spectra of brightest mm-band sources. Sub-millimeter emission lines of several most abundant isotopes having hyperfine splitting might also be detected in spectra of young supernova remnants.Comment: 12 pages, 5 figures, accepted by Astronomy Letters; v3: details added; error fixe

The influence of color on snake detection in visual search in human children

It is well known that adult humans detect snakes as targets more quickly than flowers as the targets and that how rapidly they detect a snake picture does not differ whether the images are in color or gray-scale, whereas they find a flower picture more rapidly when the images are in color than when the images are gray-scale. In the present study, a total of 111 children were presented with 3-by-3 matrices of images of snakes and flowers in either color or gray-scale displays. Unlike the adults reported on previously, the present participants responded to the target faster when it was in color than when it was gray-scale, whether the target was a snake or a flower, regardless of their age. When detecting snakes, human children appear to selectively attend to their color, which would contribute to the detection being more rapidly at the expense of its precision

The UV-SCOPE mission: ultraviolet spectroscopic characterization of planets and their environments

UV-SCOPE is a mission concept to determine the causes of atmospheric mass loss in exoplanets, investigate the mechanisms driving aerosol formation in hot Jupiters, and study the influence of the stellar environment on atmospheric evolution and habitability. As part of these investigations, the mission will generate a broad-purpose legacy database of time-domain ultraviolet (UV) spectra for nearly 200 stars and planets. The observatory consists of a 60 cm, f/10 telescope paired to a long-slit spectrograph, yielding simultaneous, almost continuous coverage between 1203 Å and 4000 Å, with resolutions ranging from 6000 to 240. The efficient instrument provides throughputs < 4% (far-UV; FUV) and < 15% (near-UV; NUV), comparable to HST/COS and much better than HST/STIS, over the same spectral range. A key design feature is the LiF prism, which serves as a dispersive element and provides high throughput even after accounting for radiation degradation. The use of two delta-doped Electron-Multiplying CCD detectors with UV-optimized, single-layer anti-reflection coatings provides high quantum efficiency and low detector noise. From the Earth-Sun second Lagrangian point, UV-SCOPE will continuously observe planetary transits and stellar variability in the full FUV-to-NUV range, with negligible astrophysical background. All these features make UV-SCOPE the ideal instrument to study exoplanetary atmospheres and the impact of host stars on their planets. UV-SCOPE was proposed to NASA as a Medium Explorer (MidEx) mission for the 2021 Announcement of Opportunity. If approved, the observatory will be developed over a 5-year period. Its primary science mission takes 34 months to complete. The spacecraft carries enough fuel for 6 years of operations

Experimental evidence of the ferroelectric phase transition near the λ−\lambda-point in liquid water

We studied dielectric properties of nano-sized liquid water samples confined in polymerized silicates MCM-41 characterized by the porous sizes \sim 3-10nm. We report the direct measurements of the dielectric constant by the dielectric spectroscopy method at frequencies 25Hz-1MHz and demonstrate clear signatures of the second-order phase transition of ferroelectric nature at temperatures next to the \lambda- point in the bulk supercooled water. The presented results support the previously developed polar liquid phenomenology and hence establish its applicability to model actual phenomena in liquid water.Comment: 4 pages, single figur