141 research outputs found
Recommended from our members
A tensile deformation model for in-situ dendrite/metallic glass matrix composites
In-situ dendrite/metallic glass matrix composites (MGMCs) with a composition of Ti46Zr20V12Cu5Be17 exhibit ultimate tensile strength of 1510 MPa and fracture strain of about 7.6%. A tensile deformation model is established, based on the five-stage classification: (1) elastic-elastic, (2) elastic-plastic, (3) plastic-plastic (yield platform), (4) plastic-plastic (work hardening), and (5) plastic-plastic (softening) stages, analogous to the tensile behavior of common carbon steels. The constitutive relations strongly elucidate the tensile deformation mechanism. In parallel, the simulation results by a finite-element method (FEM) are in good agreement with the experimental findings and theoretical calculations. The present study gives a mathematical model to clarify the work-hardening behavior of dendrites and softening of the amorphous matrix. Furthermore, the model can be employed to simulate the tensile behavior of in-situ dendrite/MGMCs
Development and Characterization of Low-Density Ca-Based Bulk Metallic Glasses: An Overview
Oscillatory Turing patterns in a simple reaction-diffusion system
Turing suggested that, under certain conditions, chemicals can react and diffuse in such a way as to produce steady-state inhomogeneous spatial patterns of chemical concentrations. We consider a simple two-variable reaction-diffusion system and find there is a spatio-temporally oscillating solution (STOS) in parameter regions where linear analysis predicts a pure Turing instability and no Hopf instability. We compute the boundary of the STOS and spatially non-uniform solution (SSNS) regions and investigate what features control its behavior
Complex dynamics of simple structural systems
Journal of the Chinese Institute of Engineers, Transactions of the Chinese Institute of Engineers,Series A/Chung-kuo Kung Ch'eng Hsuch K'an124409-414JCIE
Recommended from our members
A COMPARISON OF ENVIRONMENTALLY-INFLUENCED NEAR-THRESHOLD FATIGUE CRACK GROWTH BEHAVIOR IN HIGH AND LOWER STRENGTH STEELS AT CONVENTIONAL FREQUENCIES
Recommended from our members
Point Defects in Binary Laves-Phase Alloys
Point defects in the binary C15 NbCrQ and NbCoz, and C 14 NbFe2 systems on both sides of stoichiometry were studied by both bulk density and X-ray Iattiee parameter measurements. It was found that the vacancy concentrations in these systems after quenching from 1000"C are essentially zero. The constitutional defects on both sides of stoichiometry for these systems were found to be of the anti-site type in comparison with the model predictions. Thermal vacancies exhibiting a maximum at the stoichiometric composition were obtained in NbCr2 Laves phase alloys after quenching from 1400"C. However, there are essentially no thermal vacancies in NbFe2 alloys after quenching from 1300oC. Anti-site hardening was found on both sides of stoichiometry for all the tie Laves phase systems studied, while the thermal vacancies in NbCr2 alloys quenched from 1400'C were found to soften the Laves phase. The anti-site hardening of the Laves phases is similar to that of the B2 compounds and the thermal vacancy softening is unique to the Laves phase. Neither the anti-site defects nor the thermal vacancies affect the fracture toughness of the Laves phases significantly
- …