Dipolar-glass-like relaxor ferroelectric behaviour in the 0.5BaTiO3-0.5Bi(Mg1/2Ti1/2)O3 electroceramic

In this study, the dielectric and ferroelectric switching behaviour of 0.5BaTiO3-0.5Bi(Mg1/2Ti1/2)O3 (BT-BMT) ceramics are investigated. The BT-BMT ceramic exhibits a typical dipolar-glass-like, dielectric polarisation relaxation. This is attributed to the 15 distinct possible local A4B2 configurations around the O ions and the effect this unavoidable local compositional variability has on the dipole relaxation behaviour of inherent {1-D h111} dipole chains, arising from correlated off-centre displacements of Bi3+ and Ti4+ ions along local {111} directions. On the other hand, switchable polarisation under strong applied electric fields is observed on different length scales accompanied by the appearance of strong polarisation relaxation, as observed via time-delayed piezoresponse hysteresis loop measurements. These experimental results demonstrate that this BT-BMT ceramic is relaxor ferroelectric in nature, although it exhibits dipolar-glass-like dielectric relaxation behaviour.The authors J.W., Y.L., and R.L.W. acknowledge the support of the Australian Research Council (ARC) in the form of Discovery projects. Y.L. also appreciates support from the ARC Future Fellowships program

NAS-ASDet: An Adaptive Design Method for Surface Defect Detection Network using Neural Architecture Search

Deep convolutional neural networks (CNNs) have been widely used in surface defect detection. However, no CNN architecture is suitable for all detection tasks and designing effective task-specific requires considerable effort. The neural architecture search (NAS) technology makes it possible to automatically generate adaptive data-driven networks. Here, we propose a new method called NAS-ASDet to adaptively design network for surface defect detection. First, a refined and industry-appropriate search space that can adaptively adjust the feature distribution is designed, which consists of repeatedly stacked basic novel cells with searchable attention operations. Then, a progressive search strategy with a deep supervision mechanism is used to explore the search space faster and better. This method can design high-performance and lightweight defect detection networks with data scarcity in industrial scenarios. The experimental results on four datasets demonstrate that the proposed method achieves superior performance and a relatively lighter model size compared to other competitive methods, including both manual and NAS-based approaches

Fully-inverted piezoresponse hysteresis loops mediated by charge injection in 0.29Pb(In1/2Nb1/2)O3–0.44Pb(Mg1/3Nb2/3)O3–0.27PbTiO3 single crystals

The domain structure and local switching behavior of ternary relaxor (001) 0.29Pb(In1/2Nb1/2)O3–0.44Pb(Mg1/3Nb2/3)O3–0.27PbTiO3single crystals are studied using piezoresponse force microscopy. The as-grown crystals exhibit a labyrinthine domain pattern similar to other relaxor-based ferroelectrics. Abnormally switched domains are observed for both positive and negative tip-voltages, with sign-dependent thresholds and growth rates on the poled crystals. Further piezoresponse hysteresis loop measurements show that fully inverted loops can be observed under high switching voltages, mediated by injected charge fields. The dynamic behavior of the observed abnormal switching is qualitatively analyzed and the underlying mechanisms discussed.Q.L., Y.L., and R.L.W. acknowledge financial support from the Australian Research Council ARC in the form of an ARC Discovery Grant No. DP0877069

Switching spectroscopic measurement of surface potentials on ferroelectric surfaces via an open-loop Kelvin probe force microscopy method

We report a method for switching spectroscopy Kelvin probe force microscopy (SS-KPFM). The method is established as a counterpart to switching spectroscopy piezoresponse force microscopy (SS-PFM) in Kelvin probe force microscopy. SS-KPFM yields quantitative information about the surface charge state during a local bias-induced polarization switching process, complementary to the electromechanical coupling properties probed via SS-PFM. Typical ferroelectric samples of a Pb-based relaxor single crystal and a BiFeO3 thin film were investigated using both methods. We briefly discuss the observed surfacecharging phenomena and their influence on the associated piezoresponse hysteresis loops.Q.L., Y.L., D.W., and R.L.W. acknowledge the support of the Australian Research Council (ARC) in the form of ARC Discovery Grants. Y.L. also acknowledges support from the ARC Future Fellowships Program

Phosphorus-doped porous carbons as efficient electrocatalysts for oxygen reduction

Dieser Beitrag ist mit Zustimmung des Rechteinhabers aufgrund einer (DFG geförderten) Allianz- bzw. Nationallizenz frei zugänglich.This publication is with permission of the rights owner freely accessible due to an Alliance licence and a national licence (funded by the DFG, German Research Foundation) respectively.Efficient electrocatalysts for the oxygen reduction reaction (ORR) play a critical role in the performance of fuel cells and metal–air batteries. In this study, we report a facile synthesis of phosphorus (P)-doped porous carbon as a highly active electrocatalyst for the ORR. Phosphorus-doped porous carbon was prepared by simultaneous doping and activation of carbon with phosphoric acid (H3PO4) in the presence of Co. Both phosphorus and cobalt were found to play significant roles in improving the catalytic activity of carbon for the ORR. The as-prepared phosphorus-doped porous carbon exhibited considerable catalytic activity for the ORR as evidenced by rotating ring-disk electrode studies. At the same mass loading, the Tafel slope of phosphorus-doped porous carbon electrocatalysts is comparable to that of the commercial Pt/C catalysts (20 wt% Pt on Vulcan XC-72, Johnson Matthey) with stability superior to Pt/C in alkaline solutions

Heterologous expression and characterization of a malathion-hydrolyzing carboxylesterase from a thermophilic bacterium, Alicyclobacillus tengchongensis

A carboxylesterase gene from thermophilic bacterium, Alicyclobacillus tengchongensis, was cloned and expressed in Escherichia coli BL21 (DE3). The gene coded for a 513 amino acid protein with a calculated molecular mass of 57.82 kDa. The deduced amino acid sequence had structural features highly conserved among serine hydrolases, including Ser204, Glu325, and His415 as a catalytic triad, as well as type-B carboxylesterase serine active site (FGGDPENITIGGQSAG) and type-B carboxylesterase signature 2 (EDCLYLNIWTP). The purified enzyme exhibited optimum activity with β-naphthyl acetate at 60 °C and pH 7 as well as stability at 25 °C and pH 7. One unit of the enzyme hydrolyzed 5 mg malathion l(−1) by 50 % within 25 min and 89 % within 100 min. The enzyme strongly degraded malathion and has a potential use for the detoxification of malathion residues

Prognosis of HIV Patients Receiving Antiretroviral Therapy According to CD4 Counts: A Long-term Follow-up study in Yunnan, China

We aim to evaluate the overall survival and associated risk factors for HIV-infected Chinese patients on antiretroviral therapy (ART). 2517 patients receiving ART between 2006 and 2016 were prospectively enrolled in Yunnan province. Kaplan-Meier analyses and Cox proportional hazard regression analyses were performed. 216/2517 patients died during a median 17.5 (interquartile range [IQR] 6.8-33.2) months of follow-up. 82/216 occurred within 6 months of starting ART. Adjusted hazard ratios were10.69 (95%CI 2.38-48.02, p = 0.002) for old age, 1.94 (95%CI 1.40-2.69, p < 0.0001) for advanced WHO stage, and 0.42 (95%CI 0.27-0.63, p < 0.0001) for heterosexual transmission compared to injecting drug users. Surprisingly, adjusted hazard ratios comparing low CD4 counts group (<50 cells/μl) with high CD4 counts group (≥500 cells/μl) within six months after starting ART was 20.17 (95%CI 4.62-87.95, p < 0.0001) and it declined to 3.57 (95%CI 1.10-11.58, p = 0.034) afterwards. Age, WHO stage, transmission route are significantly independent risk factors for ART treated HIV patients. Importantly, baseline CD4 counts is strongly inversely associated with survival in the first six months; whereas it becomes a weak prognostic factor after six months of starting ART