175 research outputs found
Study on two-stage mounting systems having distributed intermediate mass
Nowadays, two-stage mounting system having integral intermediate mass is widely applied and researched to attenuate vibration of marine machinery equipment, while two stage mounting system having distributed intermediate mass which has the feature of lightweight and installation dimension is rarely used and studied. The theoretical models of two types of mounting systems are set up and force transmissibility rate of the two mounting systems are deduced through four-pole parameters method. A scale experimental prototype is established to test the isolation efficiency of the two-stage mounting system having distributed intermediate mass. FEMs of the two systems are established to make a comparison ascertaining the difference between the two about vibration isolation efficiency at the different frequency. The result shows that two stage mounting system having distributed intermediate mass achieve better vibration isolation efficiency and take less space than two-stage mounting system having integral intermediate mass if with equivalent intermediate mass. Two-stage mounting system having distributed intermediate mass can meet the requirements of practical projects and provides a new way for engineer to refer to when meet with machinery equipment vibration problems
Jamming precoding in AF relay-aided PLC systems with multiple eavessdroppers
Enhancing information security has become increasingly significant in the digital age. This paper investigates the concept of physical layer security (PLS) within a relay-aided power line communication (PLC) system operating over a multiple-input multiple-output (MIMO) channel based on MK model. Specifically, we examine the transmission of confidential signals between a source and a distant destination while accounting for the presence of multiple eavesdroppers, both colluding and non-colluding. We propose a two-phase jamming scheme that leverages a full-duplex (FD) amplify-and-forward (AF) relay to address this challenge. Our primary objective is to maximize the secrecy rate, which necessitates the optimization of the jamming precoding and transmitting precoding matrices at both the source and the relay while adhering to transmit power constraints. We present a formulation of this problem and demonstrate that it can be efficiently solved using an effective block coordinate descent (BCD) algorithm. Simulation results are conducted to validate the convergence and performance of the proposed algorithm. These findings confirm the effectiveness of our approach. Furthermore, the numerical analysis reveals that our proposed algorithm surpasses traditional schemes that lack jamming to achieve higher secrecy rates. As a result, the proposed algorithm offers the benefit of guaranteeing secure communications in a realistic channel model, even in scenarios involving colluding eavesdroppers
Study of the influence of the resonance changer on the longitudinal vibration of marine propulsion shafting system
For investigating the characteristics of the resonance changer and its influence on the longitudinal vibration of marine propulsion shafting system, by the transfer matrix method, the model of the shafting system, including the resonance changer is established. The influences of the resonance changer with various designing parameters on the force transmissibility through the thrust bearing foundation are evaluated. The results show that, the introduction of the resonance changer eliminates the resonance at original 1st natural frequency and introduces another two resonance peaks, as well as significantly lowering the maximum response compared with the original peak. The right one is attributed to the resonance changer, while the other is due to excitation of the other shafting system components. The 2nd natural frequency moves towards the high frequency direction and the peak value nearly stay invariable. If the designing parameters of the resonance changer are well optimized, the objective of reducing the longitudinal vibration transmission through the shafting system to the hull could be achieved
GPNet: Simplifying Graph Neural Networks via Multi-channel Geometric Polynomials
Graph Neural Networks (GNNs) are a promising deep learning approach for
circumventing many real-world problems on graph-structured data. However, these
models usually have at least one of four fundamental limitations:
over-smoothing, over-fitting, difficult to train, and strong homophily
assumption. For example, Simple Graph Convolution (SGC) is known to suffer from
the first and fourth limitations. To tackle these limitations, we identify a
set of key designs including (D1) dilated convolution, (D2) multi-channel
learning, (D3) self-attention score, and (D4) sign factor to boost learning
from different types (i.e. homophily and heterophily) and scales (i.e. small,
medium, and large) of networks, and combine them into a graph neural network,
GPNet, a simple and efficient one-layer model. We theoretically analyze the
model and show that it can approximate various graph filters by adjusting the
self-attention score and sign factor. Experiments show that GPNet consistently
outperforms baselines in terms of average rank, average accuracy, complexity,
and parameters on semi-supervised and full-supervised tasks, and achieves
competitive performance compared to state-of-the-art model with inductive
learning task.Comment: 15 pages, 15 figure
Cooperative Jamming with AF Relay in Power Monitoring and Communication Systems for Mining
In underground mines, physical layer security (PLS) technology is a promising method for the effective and secure communication to monitor the mining process. Therefore, in this paper, we investigate the PLS of an amplify-and-forward relay-aided system in power monitoring and communication systems for mining, with the consideration of multiple eavesdroppers. Explicitly, we propose a PLS scheme of cooperative jamming and precoding for a full-duplex system considering imperfect channel state information. To maximize the secrecy rate of the communications, an effective block coordinate descent algorithm is used to design the precoding and jamming matrix at both the source and the relay. Furthermore, the effectiveness and convergence of the proposed scheme with high channel state information uncertainty have been proven
Channel Rectification and Signal Estimation Based on EIV Model in Massive MIMO System
The performance of Massive MIMO is severely limited by channel estimation error, which is caused by pilot contamination and channel aging. In this paper, we propose an estimation algorithm based on the weighted total least-squares method with errors-in-variables (EIV) model to alleviate the influence of pilot contamination and channel aging. Then, a channel rectification method has been investigated to diminish the inaccuracy of channel estimation. Comparing with the traditional methods, it not only helps to make the signal estimation more accurate, but also provides opportunities to correct the channel model with estimation error and update the aged channel statement information. Simulations are provided to verify the efficacy of this method
A six-generation Chinese family in haplogroup B4C1C exhibits high penetrance of 1555A > G-induced hearing Loss
<p>Abstract</p> <p>Background</p> <p>The 1555A > G mutation is the most common cause of aminoglycoside-induced and non-syndromic deafness. However, the variable clinical phenotype and incomplete penetrance of A1555G-induced hearing loss complicate our understanding of this mutation. Environmental factors, nuclear genes, mitochondrial haplotypes/variants and a possible threshold effect have been reported to may be involved in its manifestation.</p> <p>Methods</p> <p>Here, we performed a clinical, molecular, genetic and phylogenic analysis in a six-generation Chinese family.</p> <p>Results</p> <p>A clinical evaluation revealed that affected individuals without aminoglycoside exposure developed hearing loss extending gradually from 12000 Hz to 8000 Hz and then to 4000 Hz. Using pyrosequencing, we detected an identical homoplasmic 1555A > G mutation in all individuals except one. We did not find any correlation between the mutation load and the severity of hearing loss. T123N coexisted with the 1555A > G mutation in six affected subjects in our pedigree. Analysis of the complete mtDNA genome of this family revealed that this family belonged to haplotype B4C1C and exhibited high penetrance. Upon the inclusion of subjects that had been exposed to aminoglycosides, the penetrance of the hearing loss was 63.6%.; without exposure to aminoglycosides, it was 51.5%. This pedigree and another reported Chinese pedigree share the same haplotype (B4C1C) and lack functionally significant mitochondrial tRNA variants, but nevertheless they exhibit a different penetrance of hearing loss.</p> <p>Conclusions</p> <p>Our results imply that the factors responsible for the higher penetrance and variable expression of the deafness associated with the 1555A > G mutation in this pedigree may not be mtDNA haplotype/variants, but rather nuclear genes and/or aminoglycosides.</p
Directional Enhanced Probe for Side-Illumination Tip Enhanced Spectroscopy
We demonstrate a high-performance apertureless near-field probe made of a
tapered metal tip with a set of periodic shallow grooves near the apex. The
spontaneous emission from a single emitter near the tip is investigated
systematically for the side-illumination tip enhanced spectroscopy (TES). In
contrast with the bare tapered metal tip in conventional side-illumination TES,
the corrugated probe not only enhances strongly local excitation field but also
concentrates the emission directivity, which leads to high collection
efficiency and signal-to-noise ratio. In particular, we propose an asymmetric
TES tip based on two coupling nanorods with different length at the apex to
realize unidirectional enhanced emission rate from a single emitter.
Interestingly, we find that the radiation pattern is sensitive to the emission
wavelength and the emitter positions respective to the apex, which can result
in an increase of signal-to-noise ratio by suppressing undesired signal. The
proposed asymmetrical corrugated probe opens up a broad range of practical
applications, e.g. increasing the detection efficiency of tip enhanced
spectroscopy at the single-molecule level
Recommended from our members
BMP4 signaling is involved in the generation of inner ear sensory epithelia
BACKGROUND: The robust expression of BMP4 in the incipient sensory organs of the inner ear suggests possible roles for this signaling protein during induction and development of auditory and vestibular sensory epithelia. Homozygous BMP4-/- animals die before the inner ear's sensory organs develop, which precludes determining the role of BMP4 in these organs with simple gene knockout experiments. RESULTS: Here we use a chicken otocyst culture system to perform quantitative studies on the development of inner ear cell types and show that hair cell and supporting cell generation is remarkably reduced when BMP signaling is blocked, either with its antagonist noggin or by using soluble BMP receptors. Conversely, we observed an increase in the number of hair cells when cultured otocysts were treated with exogenous BMP4. BMP4 treatment additionally prompted down-regulation of Pax-2 protein in proliferating sensory epithelial progenitors, leading to reduced progenitor cell proliferation. CONCLUSION: Our results implicate BMP4 in two events during chicken inner ear sensory epithelium formation: first, in inducing the switch from proliferative sensory epithelium progenitors to differentiating epithelial cells and secondly, in promoting the differentiation of hair cells within the developing sensory epithelia
Host genetic background rather than diet-induced gut microbiota shifts of sympatric black-necked crane, common crane and bar-headed goose
IntroductionGut microbiota of wild birds are affected by many factors, and host genetic background and diet are considered to be two important factors affecting their structure and function.MethodsIn order to clarify how these two factors influence the gut microbiota, this study selected the sympatric and closely related and similar-sized Black-necked Crane (Grus nigricollis) and Common Crane (Grus grus), as well as the distantly related and significantly different-sized Bar-headed Goose (Anser indicus). The fecal samples identified using sanger sequencing as the above three bird species were subjected to high-throughput sequencing of rbcL gene and 16S rRNA gene to identify the feeding types phytophagous food and gut microbiota.ResultsThe results showed significant differences in food diversity between black-necked cranes and Common Cranes, but no significant differences in gut microbiota, Potatoes accounted for approximately 50% of their diets. Bar-headed Geese mainly feed on medicinal plants such as Angelica sinensis, Alternanthera philoxeroides, and Ranunculus repens. Black-necked cranes and Common Cranes, which have a high-starch diet, have a similar degree of enrichment in metabolism and synthesis functions, which is significantly different from Bar-headed Geese with a high-fiber diet. The differences in metabolic pathways among the three bird species are driven by food. The feeding of medicinal plants promotes the health of Bar-headed Geese, indicating that food influences the functional pathways of gut microbiota. Spearman analysis showed that there were few gut microbiota related to food, but almost all metabolic pathways were related to food.ConclusionThe host genetic background is the dominant factor determining the composition of the microbiota. Monitoring the changes in gut microbiota and feeding types of wild birds through bird feces is of great reference value for the conservation of other endangered species
- …