Degradation of azo dye orange G in aqueous solutions by persulfate with ferrous ion

2009-2010 > Academic research: refereed > Publication in refereed journalAccepted ManuscriptPublishe

Influences of processing technique on electrical characteristics of TVS used in communication systems

An improved technique is proposed in fabricating a semiconductor surge protection device which is used in high-speed wideband information transmission systems. In order to increase the surge handling capability of the device, a double p-type diffusion is used. Specifically, in the diffusion step of gallium, SiO2 is used as a mask to obtain a very small base width and to avoid the reduction of carrier lifetime. It is found that this is a very useful way to reduce the on-state voltage drop and therefore the energy dissipation of the device.published_or_final_versio

Precise Sm-Nd and U-Pb isotopic dating of the supergiant Shizhuyuan polymetallic deposit and its host granite, SE China

The supergiant Shizhuyuan W-Sn-Bi-Mo deposit is hosted by the Qianlishan granite, a small, highly fractionated granitic pluton (~10 km2) with multiple phases of intrusions within the Early Yanshanian granitoid province of SE China. Strong alteration of skarn and greisen that formed in the contact zone between the first and second phases of granite intrusions and Devonian limestone is responsible for the polymetallic mineralizations. SHRIMP U-Pb zircon analysis indicates that the two early phases of the Qianlishan granite formed contemporaneously at 152 ± 2 Ma. Metasomatic minerals (garnet, fluorite and wolframite) separated from the skarn and greisen yield a Sm-Nd isochron age of 149 ± 2 Ma that is interpreted as the formation age of the Shizhuyuan deposit. Therefore, the mineralization of the supergiant Shizhuyuan polymetallic deposit formed contemporaneously with, or very shortly after, the intrusion of the small, highly fractionated Qianlishan granite. © 2004 Cambridge University Press.published_or_final_versio

Antiproliferative activity of recombinant human interferon-λ2 expressed in stably transformed BmN cells

This study aimed at the generation of a stable transformed silkworm BmN cell line which can continuously express human interferon-λ2 (IFN-λ2) gene, and investigated the antiproliferative activity of this recombinant human IFN-λ2. Silkworm BmN cells were transfected with the recombinant vector pIZT/V5-His harboring the human IFN-λ2 gene. After the BmN cells were transfected with the pIZT/V5- His- hIFN-λ2 vector, the stably transformed BmN cells expressing hIFN-λ2 gene were selected using Zeocin. Following two months of screening, the transformed BmN cell line was obtained. Stable transformed BmN cell line can be maintained at a lower Zeocin concentration. The representing 26 kDa protein band of IFN-λ2 was detected by SDS-PAGE and Western blotting. The expression level of hIFN- λ2, determined by ELISA, was about 8.142 ng in 4 × 105 cells. The antiproliferative activity of hIFN-λ2 was determined by MTT assay. The 50% inhibitory concentrations (IC50) of the recombinant hIFN-λ2 on A549 (lung cancer cells), HL60 (acute promyelocytic leukemia cells), BEL-7402 (liver cancer cells) and M231 cells (breast cancer cells) were approximately 3.21, 2.84, 6.29 and 9.32 ng/ml, respectively. In summary, Human IFN-λ2 can be stably expressed in the transformed BmN cell line, and the expressed recombinant hIFN-λ2 demonstrated antiproliferative activity to tumor cells in vitro.Key words: Human interferon-λ2 protein, gene expression, antiproliferative activity

Investigation of Thermal Diffusivity for Nano-Phase Composite Ceramics

In recent years, there has been increasing interest in nanostructured ceramic materials because of their advanced properties. The superplasticity; improved strength and toughness, higher densification rate and low sintering temperature are observed in these materials[1–4]. The sintering speed vsintering of ceramic is related to the grain size d by the expression of vsin ting ∝d-4 [2]. By adding the nano-particles of Al2O3 to conventional Al2O3, the strength, fracture toughness and thermal resistance of Al2O3 ceramic can increase[5]. Up to now, only a few researchers[6,7] have concerned about the specific heat and thermal expansion of nano- ceramics, and no report about thermal diffusivity of nano-composite has been found in literature. However, characterizations of thermal diffusivity of nanocomposite ceramics are very important for designing and preparing this kind of new materials.</p

Revealing microstructural evolutions, mechanical properties and wear performance of wire arc additive manufacturing homogeneous and heterogeneous NiTi alloy

Heterogeneous microstructure designs have attracted a great deal of attention, not only because they have the potential to achieve an ideal combination of two conflicting properties, but also because the processes involved in their fabrication are cost-effective and can be scaled up for industrial production. The process parameters in the preparation process have an important effect on the microstructure and properties of alloy members prepared by wire arc additive manufacturing (WAAM) technology. It was expected that the spatial heterogeneous microstructure with large microstructural heterogeneities in metals can be formed through changing the process parameters. In this work, homogeneous NiTi thin-walled component and heterogeneous NiTi thin-walled component were fabricated using WAAM technology by adjusting the heat input. The effects of deposition height and heat input on the microstructure, mechanical properties and wear properties of WAAM NiTi alloys were investigated. The results show that grains were gradually refined with the increase of deposition height in the homogeneous WAAM NiTi component. The ultimate tensile strength of homogeneous WAAM NiTi component increased from 606.87 MPa to 654.45 MPa and the elongation increased from 12.72% to 15.38%, as the increase of deposition height. Moreover, the homogeneous WAAM NiTi component exhibited excellent wear resistance, the coefficient of friction decreased from 0.760 to 0.715 with the increase of deposition height. Meanwhile, the grains in the heterogeneous WAAM NiTi component shows the finest grains in the central region. The ultimate tensile strength of the lower region, middle region and upper region of heterogeneous WAAM NiTi components were 556.12 MPa, 599.53 MPa and 739.79 MPa, and the elongations were 12.98%, 16.69%, 21.74%, respectively. The coefficient of friction for the lower region, middle region and upper region of heterogeneous WAAM NiTi components were 0.713, 0.720 and 0.710, respectively. The microhardness and cyclic compression properties of the homogeneous components with higher heat input were better than those of the heterogeneous components for the same deposition height. The tensile yield strength, elongation and wear resistance of the heterogeneous components were superior compared to the homogeneous components. These results can be used to optimize the WAAM process parameters to prepare NiTi components with excellent mechanical properties

Facile Synthesis of High Quality Graphene Nanoribbons

Graphene nanoribbons have attracted attention for their novel electronic and spin transport properties1-6, and because nanoribbons less than 10 nm wide have a band gap that can be used to make field effect transistors. However, producing nanoribbons of very high quality, or in high volumes, remains a challenge. Here, we show that pristine few-layer nanoribbons can be produced by unzipping mildly gas-phase oxidized multiwalled carbon nanotube using mechanical sonication in an organic solvent. The nanoribbons exhibit very high quality, with smooth edges (as seen by high-resolution transmission electron microscopy), low ratios of disorder to graphitic Raman bands, and the highest electrical conductance and mobility reported to date (up to 5e2/h and 1500 cm2/Vs for ribbons 10-20 nm in width). Further, at low temperature, the nanoribbons exhibit phase coherent transport and Fabry-Perot interference, suggesting minimal defects and edge roughness. The yield of nanoribbons was ~2% of the starting raw nanotube soot material, which was significantly higher than previous methods capable of producing high quality narrow nanoribbons1. The relatively high yield synthesis of pristine graphene nanoribbons will make these materials easily accessible for a wide range of fundamental and practical applications.Comment: Nature Nanotechnology in pres

Decentralized Estimation over Orthogonal Multiple-access Fading Channels in Wireless Sensor Networks - Optimal and Suboptimal Estimators

Optimal and suboptimal decentralized estimators in wireless sensor networks (WSNs) over orthogonal multiple-access fading channels are studied in this paper. Considering multiple-bit quantization before digital transmission, we develop maximum likelihood estimators (MLEs) with both known and unknown channel state information (CSI). When training symbols are available, we derive a MLE that is a special case of the MLE with unknown CSI. It implicitly uses the training symbols to estimate the channel coefficients and exploits the estimated CSI in an optimal way. To reduce the computational complexity, we propose suboptimal estimators. These estimators exploit both signal and data level redundant information to improve the estimation performance. The proposed MLEs reduce to traditional fusion based or diversity based estimators when communications or observations are perfect. By introducing a general message function, the proposed estimators can be applied when various analog or digital transmission schemes are used. The simulations show that the estimators using digital communications with multiple-bit quantization outperform the estimator using analog-and-forwarding transmission in fading channels. When considering the total bandwidth and energy constraints, the MLE using multiple-bit quantization is superior to that using binary quantization at medium and high observation signal-to-noise ratio levels