Asymmetric Heat Transfer with Linear Conductive Metamaterials

Asymmetric heat transfer systems, often referred to as thermal diodes or thermal rectifiers, have garnered increasing interest due to their wide range of application possibilities. Most of those previous macroscopic thermal diodes either resort to nonlinear thermal conductivities with strong temperature dependence that may be quite limited by or fixed in natural materials or rely on active modulation that necessitated auxiliary energy payloads. Here, we establish a straightforward strategy of passively realizing asymmetric heat transfer with linear conductive materials. The strategy also introduces a new interrogative perspective on the design of asymmetric heat transfer utilizing nonlinear thermal conductivity, correcting the misconception that thermal rectification is impossible with separable nonlinear thermal conductivity. The nonlinear perturbation mode can be versatilely engineered to produce an effective and wide-ranging perturbation in the heat conduction, which imitates and bypasses intrinsic thermal nonlinearity constraints set by naturally occurring counterparts. Independent experimental characterizations of surface thermal radiation and thermal convection verified that the heat exchange between a graded linear thermal metamaterial and the ambient can be tailored to achieve macroscopic asymmetric heat transfer. Our work is envisaged to inspire conceptual models for heat transfer control, serving as a robust and convenient platform for advanced thermal management, thermal computation, and heat transport

Oxidation-induced Cu coating on steel surface

Abstract. Copper is accumulated in recycled steels and is difficult to be removed during steelmaking processes when steel scrap is used as steel sources. Meanwhile, copper characteristics are of importance both to human beings and to animals and plants. In this paper, integrated copper coating was observed on the surface of copper-containing steels when the steels were heated at around 1150℃. However, the copper was separately scattered in and under the surface rust after heating at 1000℃. The forming mechanisms of copper coating are discussed in detail. By choosing a proper descaling reagent, self-generated oxidation-induced copper coating appeared on the steel surface. The method proposed in this work is environmentally friendly for nontoxic chemicals being used. In addition, this provides a new concept for producing protective composite by oxidizing from the substrate directly and there is no bonding problem

Increased extreme precipitation in Chinese deserts from 1960 to 2018

Extreme precipitation over drylands, especially deserts, has been often observed. The precipitation changes in Chinese deserts have been rarely studied. Here, we use a daily grid precipitation dataset generated via weather station data (0.25° horizontal grid spacing) to investigate the spatial and temporal changes in extreme precipitation in Chinese deserts. The extreme precipitation based on the changes in the total precipitation (PRCPTOT) and the annual‐maximum daily precipitation (Rx1day) in the Chinese desert exhibits markedly increasing trends and presents a spatial distribution of wetting in the western deserts and drying in the eastern deserts. The increase in extreme precipitation could minimize wind erosion and intensify dune stabilization in the western Chinese deserts

A Design Of Taper-Like Etched Multicore Fiber Refractive Index-Insensitive A Temperature Highly Sensitive Mach-Zehnder Interferometer

We propose and demonstrate Mach-Zehnder interferometer (MZI), which is the refractive index (RI) insensitive and temperature highly sensitive based on etched multi-core fiber (MCF) structure. The MCF and Fiber Bragg Grating (FBG) are used as hybrid sensing elements. The fabrication of the interferometer is provided a new taper-like structure by etching the MCF to further expose the side cores to the surroundings. The interferometer has produced a sensitivity of 103.2pm/°C within the ambient temperature up-to 70°C. Moreover, the superior temperature sensitivity is 89.19pm/°C, 66.64pm/°C, 56.42pm/°C in the range of 24°C to 130°C, and RI-insensitive in the range of 1.34 to 1.38, for different waists of etched seven-core fiber interferometers (E7CFIs) \sim ~84.70\mu \text{m} , 93.10\mu \text{m} , 108.67\mu \text{m} , respectively. Compared with the conventional FBGs, the sensitivity of the interferometer is significantly improved by 8 times. E7CFI\u27s novel and advantageous features can easily be distinguished other devices. Besides, the proposed sensing architecture is compact, easy to fabricate, highly sensitive, easy to reproduce, and makes it an inexpensive fiber optic device