8 research outputs found
Energy consumption and CO2 emissions in Tibet and its cities in 2014
Because of its low level of energy consumption and the small scale of its industrial development, the Tibet Autonomous Region has historically been excluded from China's reported energy statistics, including those regarding CO2 emissions. In this paper, we estimate Tibet's energy consumption using limited online documents, and we calculate the 2014 energy-related and process-related CO2 emissions of Tibet and its seven prefecture-level administrative divisions for the first time. Our results show that 5.52 million tons of CO2 were emitted in Tibet in 2014; 33% of these emissions are associated with cement production. Tibet's emissions per capita amounted to 1.74 tons in 2014, which is substantially lower than the national average, although Tibet's emission intensity is relatively high at 0.60 tons per thousand yuan in 2014. Among Tibet's seven prefecture-level administrative divisions, Lhasa City and Shannan Region are the two largest CO2 contributors and have the highest per capita emissions and emission intensities. The Nagqu and Nyingchi regions emit little CO2 due to their farming/pasturing-dominated economies. This quantitative measure of Tibet's regional CO2 emissions provides solid data support for Tibet's actions on climate change and emission reductions
Does diversification help improve the performance of coal companies? Evidence from Chinaâs listed coal companies
As an important component of the natural resources and energy market, China's coal market has experienced a continuous downturn in recent years. Many coal enterprises have been diversifying their businesses in an effort to enhance their corporate performance. Although many studies have examined the relationship between diversification and performance, researchers have not reached a consensus regarding the nature of this relationship. Additionally, to our knowledge, no study has specifically examined this relationship in coal enterprises. In view of China's coal industry characteristics, such as natural resource dependence and state ownership, other industriesâ diversified development could not provide good consults for it. In this study, we investigate the relationship between diversification and corporate performance by analyzing the business data of all of China's listed coal enterprises. After determining 35 listed coal enterprisesâ main business and the proportion of their profit from the coal business, we choose 10 enterprises as representatives. Correlation and regression analyses including the time-series data analysis and panel data analysis are conducted to examine the relationship between diversification and performance. The results indicate that this relationship varies across firms; we observe nonlinear, positive linear, negative linear, and nonexistent relationships in the sample. Therefore, diversified development is not the âpanaceaâ for the decline of coal enterprise. Enterprise performance is determined by integrated internal and external factors beyond diversification, including the market environment, the industry environment, and policy. Coal enterprises that aim to develop diversification strategy should be cautious. In addition, this study can serve as a reference for other energy enterprises that are planning to diversify their business to improve performance
A Battery Thermal Management System Coupling High-Stable Phase Change Material Module with Internal Liquid Cooling
In this work, we develop a hybrid battery thermal management (BTM) system for a 7 Ă 7 large battery module by coupling an epoxy resin (ER)-enhanced phase change material (PCM) module with internal liquid cooling (LC) tubes. The supporting material of ER greatly enhances the thermal stability and prevents PCM leakage under high-temperature environments. In addition, the other two components of paraffin and expanded graphite contribute a large latent heat of 189 J gâ1 and a high thermal conductivity of 2.2 W mâ1 Kâ1 to the PCM module, respectively. The LC tubes can dissipate extra heat under severe operating conditions, demonstrating effective secondary heat dissipation and avoiding heat storage saturation of the module. Consequently, during the charge-discharge tests under a 40 °C ambient temperature, the temperature of the PCM-LC battery module could be maintained below 40.48, 43.56, 45.38 and 47.61 °C with the inlet water temperature of 20, 25, 30 and 35 °C, respectively. During the continuous charge-discharge cycles, the temperature could be maintained below ~48 °C. We believe that this work contributes a guidance for designing PCM-LC-based BTM systems with high stability and reliability towards large-scale battery modules
A Battery Thermal Management System Coupling High-Stable Phase Change Material Module with Internal Liquid Cooling
In this work, we develop a hybrid battery thermal management (BTM) system for a 7 × 7 large battery module by coupling an epoxy resin (ER)-enhanced phase change material (PCM) module with internal liquid cooling (LC) tubes. The supporting material of ER greatly enhances the thermal stability and prevents PCM leakage under high-temperature environments. In addition, the other two components of paraffin and expanded graphite contribute a large latent heat of 189 J g−1 and a high thermal conductivity of 2.2 W m−1 K−1 to the PCM module, respectively. The LC tubes can dissipate extra heat under severe operating conditions, demonstrating effective secondary heat dissipation and avoiding heat storage saturation of the module. Consequently, during the charge-discharge tests under a 40 °C ambient temperature, the temperature of the PCM-LC battery module could be maintained below 40.48, 43.56, 45.38 and 47.61 °C with the inlet water temperature of 20, 25, 30 and 35 °C, respectively. During the continuous charge-discharge cycles, the temperature could be maintained below ~48 °C. We believe that this work contributes a guidance for designing PCM-LC-based BTM systems with high stability and reliability towards large-scale battery modules
The application of two drainage angles in neurocritical care patients with complicated pneumonia: a randomized controlled trial
Background Although head elevation is an early first-line treatment for elevated intracranial pressure (ICP), the use of the head-down or prone position in managing neurocritical patients is controversial because a change in a position directly affects the intracranial and cerebral perfusion pressure, which may cause secondary brain injury and affect patient outcomes. This study compared the effects of two postural drainage positions (30° head-up tilt and 0° head flat) on the prognosis of neurocritical care patients with complicated pneumonia and a clinical pulmonary infection score (CPIS) â„5 points to provide a reference for selecting appropriate postural drainage positions for patients with pneumonia in neurocritical care units. Methods A prospective randomized controlled study was conducted with 62 neurocritical care patients with complicated pneumonia. The patients were categorized into control (=31) and experimental (=31) groups in a 1:1 ratio using a simple randomized non-homologous pairing method. Emphasis was placed on matching the baseline characteristics of the two groups, including patient age, sex, height, weight, Glasgow Coma Scale score, heart rate, mean arterial pressure, cough reflex, and mechanical ventilation usage to ensure comparability. Both groups received bundled care for artificial airway management. The control group maintained a standard postural drainage position of 0° head-flat, whereas the experimental group maintained a 30° head-up tilt. The efficacy of the nursing intervention was evaluated by comparing the CPIS and other therapeutic indicators between the two groups after postural drainage. Results After the intervention, the within-group comparison showed a significant decrease in the CPIS (P < 0.001); procalcitonin levels showed a significant decreasing trend (P < 0.05); the arterial oxygen pressure significantly increased (P < 0.05); the oxygenation index significantly increased (P < 0.001); and the aspiration risk score showed a significant decreasing trend (P < 0.001). A between-group comparison showed no significant differences in any of the indicators before and after the intervention (P < 0.05). Conclusion Postural drainage positions of 30° head-up tilt and 0° head-flat can improve the CPIS and oxygenation in patients without adverse effects. Therefore, we recommend that patients under neurological intensive care and having pneumonia be drained in a 30° head-up tilt position with good centralized care of the lung infection. Trial registration The study, âStudy of Angles of Postural Drainage in Neurocritical Patients with Pneumonia,â was registered in the Protocol Registration Data Element Definitions for Interventional Study database (# ChiCTR2100042155); date of registration: 2021-01-14