Creation of partial band gaps in anisotropic photonic-band-gap structures

The photonic-band-gap (PBG) structure composed of an anisotropic-dielectric sphere in uniform dielectric medium is studied by solving Maxwell’s equations using the plane-wave expansion method. In particular, for a uniaxial material with large principal refractive indices and sufficient anisotropy between them, the photonic band structures possess a full band gap in the whole Brillouin zone for a diamond lattice. Furthermore, in the 1/3 partial Brillouin zone where the Bloch wave vector has a dominant component along the extraordinary axis of uniaxial sphere, the photonic band structures are found to exhibit full band gaps for all the other lattices such as face-centered-cubic, body-centered-cubic, and simple-cubic lattices, although a complete band gap does not open in the whole Brillouin zone. The partial band gaps persist at a very low filling fraction of uniaxial sphere. This phenomenon is attributed to the breakdown of the photonic band degeneracy at high-symmetry points of the Brillouin zone by the anisotropy of material dielectricity. The combination of such an anisotropic PBG structure with the self-arrangement technique of colloidal crystal may provide a possible way to fabricate the three-dimensional photonic crystal in visible and infrared regimes. The application of a strong electric field may bring into alignment the extraordinary axis of uniaxial sphere as this configuration of spheres is most favorable thermodynamically.published_or_final_versio

Influences of processing technique on electrical characteristics of TVS used in communication systems

An improved technique is proposed in fabricating a semiconductor surge protection device which is used in high-speed wideband information transmission systems. In order to increase the surge handling capability of the device, a double p-type diffusion is used. Specifically, in the diffusion step of gallium, SiO2 is used as a mask to obtain a very small base width and to avoid the reduction of carrier lifetime. It is found that this is a very useful way to reduce the on-state voltage drop and therefore the energy dissipation of the device.published_or_final_versio

Randomized Clinical Trial on Preventing Root Caries among Community-Dwelling Elders

Dental root caries is a common disease among elders. More efforts on preventing this disease are needed. Silver diammine fluoride (SDF) is known to prevent dental caries in primary teeth. However, clinical evidence of its efficacy in preventing root surface caries is limited. This clinical trial aimed to compare the effectiveness of SDF in preventing root caries among elders in a water fluoridated area. A total of 323 elders who had at least 5 teeth with exposed root surfaces and who had self-care ability were randomly allocated into 3 intervention groups: group 1 (placebo control), annual application of tonic water; group 2, annual application of SDF solution; group 3, annual application of SDF solution, immediately followed by potassium iodide (KI) solution. Oral hygiene instructions and fluoride toothpaste were provided to all subjects. Status of dental root surface was assessed every 6 mo by the same independent examiner. After 30 mo, 257 (79.6%) elders were reviewed. The mean numbers of root surface with new caries experience in the control, SDF, and SDF/KI groups were 1.1, 0.4, and 0.5, respectively (analysis of variance, P 0.05). Moreover, elders who had higher visible plaque index scores at 30-mo examination (analysis of covariance, P < 0.001) and those who had higher baseline DMFT scores (analysis of covariance, P = 0.005) developed more new root caries. It is concluded that annual application of SDF or SDF/KI solution is effective in preventing root caries among community-dwelling elders in a fluoridated area (ClinicalTrials.gov NCT02360124).postprin

Effects of chemical composition on humidity sensitivity of Al/BaTiO3/Si structure

Argon-ion-beam sputtering technique has been applied to deposit barium titanate (BaTiO3) films on silicon wafers at room temperature under vacuum, and then Al/BaTiO3/Si structures were fabricated. Results show that the current and capacitance of these devices are sensitive to the change of relative humidity at room temperature, and saturation absorption (response) time as well as humidity sensitivity of the devices depend on the chemical composition of the BaTiO3 films. For higher annealing temperature and longer annealing time, the oxygen composition increases while fixed charge density decreases. These changes result in lower humidity sensitivity and longer response time.© 1995 American Institute of Physics.published_or_final_versio

Autoignition of R32 and R410 Refrigerant Mixtures with Lubricating Oil

Refrigerant R32 (difluoromethane, formula CH2F2) is a working fluid with favorable environmental and performance properties. However, it can be slightly flammable under certain conditions (13 – 30% by volume in air), with a flammability classification of 2L. The risks of ignition, fire, and hazardous decomposition products are being assessed in our laboratories using experiments, risk analysis, and computational fluid dynamics simulations. R32 has entered service in Japan and is being considered for service in the US. Its adoption is being hindered by its slight flammability in air. Past research has examined the flammability of pure refrigerants without considering the effects of the presence of lubricating oil. The concentration of oil released in a refrigerant leak can vary depending on the location of the leak and the operating state of the equipment. In this study, mixtures of R32 and R410 with lubricating oil are impinged onto a hot horizontal metal surface to examine autoignition behavior. The tests simulate a leak in a cooling system that impinges on a heating element. The hypothesis of this research is that the autoignition behavior of these mixtures is dominated by the presence of lubricating oil, not by differences in the refrigerant flammability. Only preliminary results are available at the time of abstract preparation, but extensive results will be included in the presentation at Purdue

Studies on hemorrhagic pneumonia in Moschus sifanicus

A series of investigations were carried out including epidemiology, etiology and pathology on hemorrhagic pneumonia in Moschus sifanicus, which had prevailed in Xinglong Mountain National Nature Reserve District in Gansu province of China. The results indicated that the prevalence of thisdisease could be correlated with local humidity in Xinglong Mountain in Gansu province of China. The disease is caused by single infection of Pasteurella multocida or mix of P. multocida, Escherichia coli and Pseudomonas aeruginosa, and is a contagious disease. The pathological changes were mainly manifested in the vessel wall of bronchia and bronchiole appeared congested, bleeding, edemic with infiltration of inflammatory cells, mucosa of bronchiole degenerates, with the presence of necrosis and exfoliation, pulmonary alveolus generated suppuration, disaggregation and necrosis. It was concluded that the diseases are mainly caused by local bacteria and affected M. sifanicus finally die of hemorrhagic or purulent, necrotic pneumonia

Cloning and bioinformatics analysis of an ubiquitin gene of the rice stem borer, Chilo suppressalis Walker (Lepidoptera: Pyralidae)

Ubiquitin which has the function of selective protein degradation may play an important role in the regulation of insect growth and development. The coding sequence of an ubiquitin gene from the larvae of the rice stem borer, Chilo suppressalis Walker (Lepidoptera: Pyralidae) named CsUB (GenBank Accession No. GU238420) was cloned by RT-PCR and sequenced in this study, with primers according to the sequences of ubiquitin genes  from Homo sapiens, Drosophila melanogaster and Lepidopteran insects. Sequence analysis showed that the length of the coding sequence is 228 bp, encoding 76 amino acids with calculated molecular weight of 8.50 kDa and the theoretical isoeletric point of 5.26. Signal sequence and transmembrane domain had not been found. Multiple sequence alignment indicated that CsUB gene sequence with other known gene sequences of invertebrates and vertebrates had a high degree of homology (more than 72% similarity) and a shorter genetic distance (lower than 0.360). During the genetic diversity analysis, the total of 104 polymorphic sites was detected from 18 ubiquitin gene sequences and 18 haplotypes were sorted. Abundant genetic diversity and strong codon usage bias were found by the haplotype diversity (1.000), average number of nucleotide differences (47.475), nucleotide diversity (0.20866), effective number of codons (44.526), codon bias index (0.559) and scaled Chi-square (0.779). The predicated secondary structure composition of CsUB protein had about 32.89% extended strands, 36.84% random colis, 15.79% alpha helixes and 14.47% beta turns. Subcellular localization analysis showed that CsUB protein of cytoplasm, cell nucleus, mitochondrion, cell skeleton and plasma membrane occupied about 47.80, 26.10, 17.40, 4.30 and 4.30%, respectively. Sequence, homology and structural analysis confirmed that CsUB gene was highly conserved during evolution and belonged to ubiquitin gene family. The results might provide some fundamental data for further studies on expressed characteristics and physiological functions of CsUB gene.Key words: Chilo suppressalis Walker, ubiquitin, gene cloning, bioinformatics

Investment in carbon dioxide capture and storage combined with enhanced water recovery

Carbon dioxide capture and storage combined with enhanced deep saline water recovery (CCS-EWR) is a potential approach to mitigate climate change. However, its investment has been a dilemma due to high costs and various uncertainties. In this study, a trinomial tree modelling-based real options approach is constructed to assess the investment in CCS-EWR retrofitting for direct coal liquefaction in China from the investor perspective. In this approach, the uncertainties in CO2 prices, capital subsidies, water resource fees, the residual lifetime of direct coal liquefaction plants, electricity prices, CO2 and freshwater transport distance, and the amount of certified emission reductions (CERs) are considered. The results show that the critical CER price for CCS-EWR retrofits is 7.15 Chinese yuan per ton (CNY/ton) higher than that (141.95 CNY/ton) for CCS retrofits. However, the exemption from water resource fees for freshwater recovered from saline water and a subsidy of 26% of the capital cost are sufficient to eliminate the negative impact of enhanced deep saline water recovery (EWR) on the investment economy of CCS-EWR. In addition, when the residual lifetime is less than 14 years, CCS-EWR projects are still unable to achieve profitability, even with flexible management and decision making; therefore, investors should abandon CCS-EWR investments. On the whole, the investment feasibility for CCS-EWR technology is not optimistic despite access to preferential policies from the government. It is necessary to establish a carbon market with a high and stable CER price

Direct participation in and indirect exposure to the occupy central movement and depressive symptoms: a longitudinal study of Hong Kong adults

postprin

Comparative study on microstructure and surface properties of keratin- and lignocellulosic-based activated carbons

© 2015 Elsevier B.V. All rights reserved. The paper probed the preparation of activated carbon by potassium silicate (K2SiO3) activation from keratin waste (cowhair waste, CW) and lignocellulosic materials (Cyperus alternifolius, CA) and the comparisons of physicochemical properties of the resulting carbons. These impregnation conditions were as follows: one impregnated at room temperature for 12 h then dipped at high temperature for 30 min; the other was only impregnated at room temperature for 12 h, producing four activated carbons CWAC-1, CWAC-2, CAAC-1, and CAAC-2. The influence of activation time, K2SiO3/precursor weight ratio, and the pre-process on properties of activated carbons was discussed. The CWAC-1 produced at 700°C with the K2SiO3/precursor weight ratio of 2:1 possessed the Brunauer-Emmet-Teller (BET) surface area of 1965 m2/g and total pore volume of 1.345 cm3/g, while CAAC-1 prepared at the same conditions attained the BET surface area of 1710 m2/g and total pore volume of 0.949 cm3/g. The surface area and total pore volume of CAAC increased with the impregnation ratio. Moreover, CWAC-1, CWAC-2, CAAC-1, and CAAC-2 exhibited high portion of micropores, illustrating the role of K2SiO3. The analysis with a Fourier transform infrared spectrometer indicates that CWAC has more functional groups than CAAC, as well as CWAC-1 and CWAC-2 which possess similar functional groups