Naval Waste Package Design Report

A design methodology for the waste packages and ancillary components, viz., the emplacement pallets and drip shields, has been developed to provide designs that satisfy the safety and operational requirements of the Yucca Mountain Project. This methodology is described in the ''Waste Package Design Methodology Report'' Mecham 2004 [DIRS 166168]. To demonstrate the practicability of this design methodology, four waste package design configurations have been selected to illustrate the application of the methodology. These four design configurations are the 21-pressurized water reactor (PWR) Absorber Plate waste package, the 44-boiling water reactor (BWR) waste package, the 5-defense high-level waste (DHLW)/United States (U.S.) Department of Energy (DOE) spent nuclear fuel (SNF) Co-disposal Short waste package, and the Naval Canistered SNF Long waste package. Also included in this demonstration is the emplacement pallet and continuous drip shield. The purpose of this report is to document how that design methodology has been applied to the waste package design configurations intended to accommodate naval canistered SNF. This demonstrates that the design methodology can be applied successfully to this waste package design configuration and support the License Application for construction of the repository

Tribo-corrosion mechanisms of stainless steel in soft drinks

Tribo-corrosion mechanisms of 316L Stainless Steel in slurries containing common household soft drinks have been studied through investigating the micro-abrasion-corrosion performance using a ball and disk apparatus which has been modified to measure the in-situ corrosion current during the abrasion process. The objective of this study was to evaluate the effect of pH and solution viscosity on the micro-abrasion-corrosion performance of the material. 316L Stainless Steel was selected because it is commonly used as a dental replacement material. This is an important area of work as the use of steel retainers as well as other stainless steel dental replacements is still widespread and the effectiveness of these devices will be determined by their tribological and tribo-corrosion performance. Additionally, an attempt has been made to investigate the importance of the pH and viscosity variables on the tribo-corrosive synergism, wastage and mechanism maps

Comparison of hyperspectral versus traditional field measurements of fractional ground cover in the Australian arid zone

Published: 28 November 2019The collection of high-quality field measurements of ground cover is critical for calibration and validation of fractional ground cover maps derived from satellite imagery. Field-based hyperspectral ground cover sampling is a potential alternative to traditional in situ techniques. This study aimed to develop an effective sampling design for spectral ground cover surveys in order to estimate fractional ground cover in the Australian arid zone. To meet this aim, we addressed two key objectives: (1) Determining how spectral surveys and traditional step-point sampling compare when conducted at the same spatial scale and (2) comparing these two methods to current Australian satellite-derived fractional cover products. Across seven arid, sparsely vegetated survey sites, six 500-m transects were established. Ground cover reflectance was recorded taking continuous hyperspectral readings along each transect while step-point surveys were conducted along the same transects. Both measures of ground cover were converted into proportions of photosynthetic vegetation, non-photosynthetic vegetation, and bare soil for each site. Comparisons were made of the proportions of photosynthetic vegetation, non-photosynthetic vegetation, and bare soil derived from both in situ methods as well as MODIS and Landsat fractional cover products. We found strong correlations between fractional cover derived from hyperspectral and step-point sampling conducted at the same spatial scale at our survey sites. Comparison of the in situ measurements and image-derived fractional cover products showed that overall, the Landsat product was strongly related to both in situ methods for non-photosynthetic vegetation and bare soil whereas the MODIS product was strongly correlated with both in situ methods for photosynthetic vegetation. This study demonstrates the potential of the spectral transect method, both in its ability to produce results comparable to the traditional transect measures, but also in its improved objectivity and relative logistic ease. Future efforts should be made to include spectral ground cover sampling as part of Australia’s plan to produce calibration and validation datasets for remotely sensed products.Claire Fisk, Kenneth D. Clarke and Megan M. Lewi

Are Antiprotons Forever?

Up to one million antiprotons from a single LEAR spill have been captured in a large Penning trap. Surprisingly, when the antiprotons are cooled to energies significantly below 1 eV, the annihilation rate falls below background. Thus, very long storage times for antiprotons have been demonstrated in the trap, even at the compromised vacuum conditions imposed by the experimental set up. The significance for future ultra-low energy experiments, including portable antiproton traps, is discussed.Comment: 12 pages, latex; 4 figures, uufiled. Slightly expanded discussion of expected energy dependence of annihilation cross section and rate, and of estimates of trap pressure, plus minor text improvement

Near-Earth asteroid sample return missions

The rate of discovery of new NEAs and the success of D-S 1 and NEAR-Shoemaker, suggest that sample return from NEAs is now technically feasible. Here we present a summary of a recent workshop on the topic

Digital terrain analysis reveals new insights into the topographic context of Australian Aboriginal stone arrangements

Published online 16 February 2017 in Wiley Online LibrarySatellite‐derived surface elevation models are an important resource for landscape archaeological studies. Digital elevation data is useful for classifying land features, characterizing terrain morphology, and discriminating the geomorphic context of archaeological phenomena. This paper shows how remotely sensed elevation data obtained from the Japan Aerospace Exploration Agency’s Advanced Land Observing Satellite was integrated with local land system spatial data to digitally classify the topographic slope position of seven broad land classes. The motivation of our research was to employ an objective method that would allow researchers to geomorphometrically discriminate the topographic context of Aboriginal stone arrangements, an important archaeological site type in the Pilbara region of northwest Australia. The resulting digital terrain model demonstrates that stone arrangement sites are strongly correlated with upper topographic land features, a finding that contradicts previous site recordings and fundamentally changes our understanding of where stone arrangement sites are likely to have been constructed. The outcome of this research provides investigators with a stronger foundation for testing hypotheses and developing archaeological models. To some degree, our results also hint at the possible functions of stone arrangements, which have largely remained enigmatic to researchers.W. Boone Law, Michael J. Slack, Bertram Ostendorf and Megan M. Lewi

Competition between quantum-liquid and electron-solid phases in intermediate Landau levels

On the basis of energy calculations we investigate the competition between quantum-liquid and electron-solid phases in the Landau levels n=1,2, and 3 as a function of their partial filling factor. Whereas the quantum-liquid phases are stable only in the vicinity of quantized values 1/(2s+1) of the partial filling factor, an electron solid in the form of a triangular lattice of clusters with a few number of electrons (bubble phase) is energetically favorable between these fillings. This alternation of electron-solid phases, which are insulating because they are pinned by the residual impurities in the sample, and quantum liquids displaying the fractional quantum Hall effect explains a recently observed reentrance of the integral quantum Hall effect in the Landau levels n=1 and 2. Around half-filling of the last Landau level, a uni-directional charge density wave (stripe phase) has a lower energy than the bubble phase.Comment: 12 pages, 9 figures; calculation of exact exchange potential for n=1,2,3 included, energies of electron-solid phases now calculated with the help of the exact potential, and discussion of approximation include

Prime mover and energy storage considerations for a hydrogen-powered series hybrid shuttle

This paper describes simulation results obtained through modeling the operation of a 6.7 m long hydrogen-powered shuttle bus. The actual shuttle bus and its hydrogen refueling station constitute the first of its kind in the state of Texas. The simulations are used to initially verify the stated performance of the shuttle bus and to validate the modeling approach. The vehicle model is then modified to assess the predicted changes in performance, efficiency, and route following capability while conducting a parametric study involving fuel cell and internal combustion prime movers as well as chemical battery and flywheel energy storage systems. Simulation results show that a fuel cell-powered shuttle bus with a high power density, low mass energy storage system provides the highest vehicle range and lowest energy consumption.Center for Electromechanic

Spatial Periodicity of Galaxy Number Counts, CMB Anisotropy, and SNIa Hubble Diagram Based on the Universe Accompanied by a Non-Minimally Coupled Scalar Field

We have succeeded in establishing a cosmological model with a non-minimally coupled scalar field $\phi$ that can account not only for the spatial periodicity or the {\it picket-fence structure} exhibited by the galaxy $N$-$z$ relation of the 2dF survey but also for the spatial power spectrum of the cosmic microwave background radiation (CMB) temperature anisotropy observed by the WMAP satellite. The Hubble diagram of our model also compares well with the observation of Type Ia supernovae. The scalar field of our model universe starts from an extremely small value at around the nucleosynthesis epoch, remains in that state for sufficiently long periods, allowing sufficient time for the CMB temperature anisotropy to form, and then starts to grow in magnitude at the redshift $z$ of $\sim 1$, followed by a damping oscillation which is required to reproduce the observed picket-fence structure of the $N$-$z$ relation. To realize such behavior of the scalar field, we have found it necessary to introduce a new form of potential $V(\phi)\propto \phi^2\exp(-q\phi^2)$, with $q$ being a constant. Through this parameter $q$, we can control the epoch at which the scalar field starts growing.Comment: 19 pages, 18 figures, Accepted for publication in Astrophysics & Space Scienc

A geometric approach to time evolution operators of Lie quantum systems

Lie systems in Quantum Mechanics are studied from a geometric point of view. In particular, we develop methods to obtain time evolution operators of time-dependent Schrodinger equations of Lie type and we show how these methods explain certain ad hoc methods used in previous papers in order to obtain exact solutions. Finally, several instances of time-dependent quadratic Hamiltonian are solved.Comment: Accepted for publication in the International Journal of Theoretical Physic