60,325 research outputs found
Solid propellant rocket motor and method of making same
A method is described for making a solid propellant rocket motor having a specific concavity formed within the fuel charge. A mandrel with an aperature wider than that of the casing is inserted within the motor casing and a solidifiable propellant cast above the mandrel. The mandrel is removed after the propellant is cured
Effect of damper on overall and blade-element performance of a compressor rotor having a tip speed of 1151 feet per second and an aspect ratio of 3.6
The overall and blade-element performance of two configurations of a moderately high aspect ratio transonic compressor rotor are presented. The subject rotor has conventional blade dampers. The performance is compared with a rotor utilizing dual wire friction dampers. At design speed the subject achieved a pressure ratio of 1.52 and efficiency of 0.89 at a near design weight flow of 72.1 pounds per second. The rotor with wire dampers gave consistently higher pressure ratios at each speed, but efficiencies for the two rotors were about the same. Stall margin for the subject rotor was 20.4 percent, but for the wire damped rotor only 4.0 percent
Recommended from our members
Atmospheric modelling for NOMAD-UVIS on board the ExoMars Trace Gas Orbiter mission
The Ultraviolet and Visible Spectrometer (UVIS) instrument development process requires the construction of an atmospheric model to provide synthetic UV transmission spectra. We discuss the requirements of the model to enable observational limits to be found, and the potential for certain atmospheric parameters to be further constrained
Spectrophotometry of Michigan-Tololo quasars
Emission-line quasar characteristics are confirmed for 80% of the objects observed, including at least four new quasars with spectral features indicative of supernova-like outflow. Approximately 73% of the redshifts predicted from the discovery plates are found accurate with a mean error in z of 0.03, and a large range of z (from about 0.1 to 3.16) is represented in the sample. The observed redshift distribution for quasars is marginally consistent with a constant co-moving quasar density above z approximately 2.0. The shape of the redshift distribution may be used as an isotropy probe with a cosmic time resolution of a few times one-hundred million years in the early universe; therefore, continued surveys of this sort are important even if accurate magnitudes are not determined
Aerodynamic performance of 0.4066-scale model of JT8D refan stage with S-duct inlet
A scale model of the JT8D refan stage was tested with a scale model of the S-duct inlet design for the refanned Boeing 727 center engine. Detailed survey data of pressures, temperatures, and flow angles were obtained over a range of flows at speeds from 70 to 97 percent of design speed. Two S-duct configurations were tested; one with a bellmouth inlet and the other with a flight lip inlet. The results indicated that the overall performance was essentially unaffected by the distortion generated by the S-duct inlet. The stall weight flow increased by less than 0.5 kg/sec (approximately 1.5% of design flow) with the S-duct inlet compared with that obtained with uniform flow. The detailed measurements indicated that the inlet guide vane (IGV) significantly reduced circumferential variations. For example, the flow angles ahead of the IGV were positive in the right half of the inlet and negative in the left half. Behind the IGV, the flow angles tended to be more uniform circumferentially
Aerodynamic performance of a 1.20-pressure ratio fan stage designed for low noise
The aerodynamic design and the overall blade element performance of a 51 centimeter diameter fan stage is presented. The stage was designed to minimize the noise generated by rotor stator interactions. The design pressure ratio was 1.20 at a flow of 30.6 kilograms per second and a rotor blade tip speed of 228.6 meters per second. At design speed the rotor peak efficiency was 0.935. The peak efficiency of the stage, however, was 0.824. The radial distribution of rotor performance parameters at peak efficiency and design speed indicated excellent agreement with design values
Effect of casing treatment on performance of an inlet stage for a transonic multistage compressor
An inlet stage of a transonic compressor was tested with three rotor tip casing treatment configurations: blade angle slots, circumferential grooves, and axial skewed slots. Significant increases in both rotor and stage total pressure ratio, total temperature ratio, efficiency, flow range, and very large improvements in stall margin were obtained with all three casing treatment configurations. The greatest improvement in performance was achieved with axial skewed slots
Modeling the evolution of infrared luminous galaxies: the influence of the Luminosity-Temperature distribution
The evolution of the luminous infrared galaxy population is explored using a
pure luminosity evolution model which incorporates the locally observed
luminosity-temperature distribution for IRAS galaxies. Pure luminosity
evolution models in a fixed CDM cosmology are fitted to submillimeter
(submm) and infrared counts, and backgrounds. It is found that the differences
between the locally determined bivariate model and the single variable
luminosity function (LF) do not manifest themselves in the observed counts, but
rather are primarily apparent in the dust temperatures of sources in flux
limited surveys. Statistically significant differences in the redshift
distributions are also observed. The bivariate model is used to predict the
counts, redshifts and temperature distributions of galaxies detectable by {\it
Spitzer}. The best fitting model is compared to the high-redshift submm galaxy
population, revealing a median redshift for the total submm population of
, in good agreement with recent spectroscopic studies of
submillimeter galaxies. The temperature distribution for the submm galaxies is
modeled to predict the radio/submm indices of the submm galaxies, revealing
that submm galaxies exhibit a broader spread in spectral energy distributions
than seen in the local IRAS galaxies.Comment: Accepted for publication in ApJ. Quality of several figures reduced
due to size restriction
An affine generalization of evacuation
We establish the existence of an involution on tabloids that is analogous to
Schutzenberger's evacuation map on standard Young tableaux. We find that the
number of its fixed points is given by evaluating a certain Green's polynomial
at , and satisfies a "domino-like" recurrence relation.Comment: 32 pages, 7 figure
- …