3,734 research outputs found
Maintaining leachate flow through a leach bed reactor during anaerobic digestion of high-solids cattle manure
2018 Fall.Includes bibliographical references.To address the accumulation of high-solids cattle manure (HSCM) found at many of the state's Animal Feeding Operations (AFOs), researchers at CSU have developed a Multi-Stage Anaerobic Digester (MSAD). The MSAD system consists of a leach bed reactor (LBR), a compositing tank, and a fixed-film methanogenic reactor. The LBR is a critical part of the MSAD system since hydrolysis can be a rate-limiting step in the anaerobic digestion of HSCM (Hinds 2015; Veeken and Hamelers 1999). To ensure that hydrolysis is occurring properly within the reactor, leachate injection and reactor operation must proceed in a manner that facilitates uniform distribution of leachate through the manure waste bed. Since the leachate must be recirculated through the LBR for the entirety of the batch digestion time, any phenomena that disrupt the duration or uniformity of leachate distribution must be addressed. The overarching goal of this thesis project was to improve the hydraulic performance of the LBR stage of the MSAD. This research included a multi-criterion decision analysis (MCDA) to assess unique design aspects of the MSAD relative to other technologies, construction and operation of a prototype LBR, and the development of an experimentation strategy to assess mechanism of hydraulic failure in the LBR. The MSAD system was compared to four other high-solids anaerobic digester technologies using a MCDA. The purpose of this comparison was to identify unique design features of the MSAD technology compared to other high-solids anaerobic digestion technologies to inform the focus of future design and research activities. The technologies were rated and evaluated for the following criteria: operational requirements, impact of hydraulic failure, capital requirements, operational control, feedstock technology fit, and process efficiency. The scores ranged from 2.9 to 3.7 out of 5 possible points. Under equal criteria weighting, the MSAD system received the highest rating with a score of 3.7. The MSAD system received high ratings due to its strong hydraulic performance, operational control, and process efficiency. Knowledge gained through laboratory and prototype-scale LBR experimentation was used to establish possible improvements to LBR design. The primary improvement to the LBR was the modification from a downflow to an upflow configuration. A prototype LBR was operated in the upflow configuration to facilitate longer durations of undisrupted leachate permeation. In addition, it was determined that leachate injection spacing should be studied further as results from operation of the prototype LBR suggested that higher volatile solids reduction occurred closer to the leachate influent manifold. Column experiments and prototype operation showed some successful operation of LBRs for treating HSCM. However, hydraulic failures due to clogging and preferential pathway formation were observed. Due to the continued risk of hydraulic failure, further research was needed to understand mechanisms for hydraulic failure and to determine approaches to overcome these issues. At commercial scale, hydraulic failure of LBRs would result in decreased energy and agricultural product output and increased operating costs. Since commercial processes rely on reproducible results, a high degree of LBR reliability is required to achieve technical and economic feasibility. Therefore, control over the hydraulic performance of LBRs is critical for commercialization of the MSAD system. To this end, an experimentation strategy was developed, with the goal to elucidate the mechanisms behind hydraulic failures occurring in the LBR. To evaluate these mechanisms, the experimentation strategy recommends the use of electrical resistivity tomography (ERT) to render visualizations of leachate distribution throughout the waste bed. Further characterization of the pore space network geometry at the microscale using either Magnetic Resonance Imaging (MRI) or X-ray Computed Tomography (X-ray CT) is recommended
Future Type Ia Supernova Data as Tests of Dark Energy from Modified Friedmann Equations
In the Cardassian model, dark energy density arises from modifications to the
Friedmann equation, which becomes H^2 = g(\rhom), where g(\rhom) is a new
function of the energy density. The universe is flat, matter dominated, and
accelerating. The distance redshift relation predictions of generalized
Cardassian models can be very different from generic quintessence models, and
can be differentiated with data from upcoming pencil beam surveys of Type Ia
Supernovae such as SNAP. We have found the interesting result that, once
is known to 10% accuracy, SNAP will be able to determine the sign of
the time dependence of the dark energy density. Knowledge of this sign (which
is related to the weak energy condition) will provide a first discrimination
between various cosmological models that fit the current observational data
(cosmological constant, quintessence, Cardassian expansion). Further, we have
performed Monte Carlo simulations to illustrate how well one can reproduce the
form of the dark energy density with SNAP.
To be concrete we study a class of two parameter (,) generalized
Cardassian models that includes the original Cardassian model (parametrized by
only) as a special case. Examples are given of MP Cardassian models that
fit current supernovae and CMB data, and prospects for differentiating between
MP Cardassian and other models in future data are discussed. We also note that
some Cardassian models can satisfy the weak energy condition even with a
dark energy component that has an effective equation of state .Comment: revised version accepted by Ap
Expanding Space: the Root of all Evil?
While it remains the staple of virtually all cosmological teaching, the
concept of expanding space in explaining the increasing separation of galaxies
has recently come under fire as a dangerous idea whose application leads to the
development of confusion and the establishment of misconceptions. In this
paper, we develop a notion of expanding space that is completely valid as a
framework for the description of the evolution of the universe and whose
application allows an intuitive understanding of the influence of universal
expansion. We also demonstrate how arguments against the concept in general
have failed thus far, as they imbue expanding space with physical properties
not consistent with the expectations of general relativity.Comment: 8 pages, accepted for publication in PAS
Brief for the Appellant, Birdwatchers of Groveton, Inc.: Fourteenth Annual Pace National Environmental Moot Court Competition
Si/TiO_2 Tandem-Junction Microwire Arrays for Unassisted Solar-Driven Water Splitting
Tandem-junction microwire array photoelectrodes have been fabricated by coating np^+-Si radial homojunction microwire arrays sequentially with fluorine-doped tin oxide (FTO) and titanium dioxide (TiO_2). These photoelectrodes effected unassisted water splitting under simulated 1 Sun conditions with an open-circuit potential (E_(oc)) of −1.5 V vs the formal potential for oxygen evolution, E^(0′)(OH^−/O_2), a current density at E = E^(0′)(OH^−/O_2) of 0.78 mA cm^(−2), a fill factor ( ff ) = 0.51, and a photovoltaic-biased photoelectrochemical ideal regenerative cell efficiency of 0.6%
Comparing the Performances of Force Fields in Conformational Searching of Hydrogen-Bond-Donating Catalysts
Here, we compare the relative performances of different force fields for conformational searching of hydrogen-bond-donating catalyst-like molecules. We assess the force fields by their predictions of conformer energies, geometries, low-energy, nonredundant conformers, and the maximum numbers of possible conformers. Overall, MM3, MMFFs, and OPLS3e had consistently strong performances and are recommended for conformationally searching molecules structurally similar to those in this study
Road Dust Correlated with Decreased Reproduction of the Endangered Utah Shrub Hesperidanthus suffrutescens
Roads associated with energy development have fragmented much of the Uinta Basin, the Colorado Plateau in general, and other areas of western North America. Beyond reducing available habitat, spreading exotic species, and creating barriers to dispersal, unpaved roads also increase dust loads on plants and pollinators, which may reduce plant growth and reproduction. We studied the effects of an unpaved road on reproduction of an endangered Utah endemic shrub. We measured the size and reproductive output of 156 plants and the dust deposition in plots at increasing distances from the road. We also hand outcrossed 240 flowers from 80 plants to help determine if any reduced reproduction was due to pre- or postpollination mechanisms. Additionally, we experimentally dusted 3 leaves on 30 plants (n = 90) and measured stomatal conductance pre-dust and post-dust. We also dusted 3 flowers on 10 plants (n = 30) prior to hand pollination and measured fruit set. Generalized linear mixed models were used to examine the relationship between reproduction and dust deposition. When controlling for plant size and distance from the road, fruit set was negatively correlated with increasing levels of dust deposition (F1, 15 = 5.26, P = 0.036). The number of seeds per plant, mean plant seed weight, and the proportion of hand-pollinated flowers that set fruit were also negatively correlated with dust, although not significantly. Dusting significantly reduced stomatal conductance (F1, 58 = 87.56, P \u3c 0.001). Eighty percent of hand pollinated flowers (24 of 30) set fruit after dusting. These results demonstrate that road dust reduces H. suffrutescens reproduction, although the mechanisms are not clear. Although dust negatively affected physiological processes, hand-pollination results suggest that dust might be disrupting pollination. This study documents the effects of road dust on the reproduction of an endangered shrub in Utah\u27s Uinta Basin and highlights the need for further research into the effects of roads and dust on nearby plants
Machine learning activation energies of chemical reactions
Application of machine learning (ML) to the prediction of reaction activation barriers is a new and exciting field for these algorithms. The works covered here are specifically those in which ML is trained to predict the activation energies of homogeneous chemical reactions, where the activation energy is given by the energy difference between the reactants and transition state of a reaction. Particular attention is paid to works that have applied ML to directly predict reaction activation energies, the limitations that may be found in these studies, and where comparisons of different types of chemical features for ML models have been made. Also explored are models that have been able to obtain high predictive accuracies, but with reduced datasets, using the Gaussian process regression ML model. In these studies, the chemical reactions for which activation barriers are modeled include those involving small organic molecules, aromatic rings, and organometallic catalysts. Also provided are brief explanations of some of the most popular types of ML models used in chemistry, as a beginner's guide for those unfamiliar
Exposure to Nickel, Chromium, or Cadmium Causes Distinct Changes in the Gene Expression Patterns of a Rat Liver Derived Cell Line
Many heavy metals, including nickel (Ni), cadmium (Cd), and chromium (Cr) are toxic industrial chemicals with an exposure risk in both occupational and environmental settings that may cause harmful outcomes. While these substances are known to produce adverse health effects leading to disease or health problems, the detailed mechanisms remain unclear. To elucidate the processes involved in the toxicity of nickel, cadmium, and chromium at the molecular level and to perform a comparative analysis, H4-II-E-C3 rat liver-derived cell lines were treated with soluble salts of each metal using concentrations derived from viability assays, and gene expression patterns were determined with DNA microarrays. We identified both common and unique biological responses to exposure to the three metals. Nickel, cadmium, chromium all induced oxidative stress with both similar and unique genes and pathways responding to this stress. Although all three metals are known to be genotoxic, evidence for DNA damage in our study only exists in response to chromium. Nickel induced a hypoxic response as well as inducing genes involved in chromatin structure, perhaps by replacing iron in key proteins. Cadmium distinctly perturbed genes related to endoplasmic reticulum stress and invoked the unfolded protein response leading to apoptosis. With these studies, we have completed the first gene expression comparative analysis of nickel, cadmium, and chromium in H4-II-E-C3 cells
- …